[ANN] INTENSE COIN - Blockchain backed decentralized VPN - Hybrid PoW

[Chisinau]

pool down again .... 

[valiant1]

I encourage everyone to join our Slack channel (link in first post) where you will get much more up-to-date information than here

The blockchain encountered some bad transactions in the 396 block. I restarted the seed nodes and resync'd the daemons and now blocks are being found once again.

Apologies for the troubles, I know this is frustrating for all of you. Please know I share your frustration. Lol.

Code:

2017-08-15 13:33:22] 2 miner threads started, using 'cryptonight' algorithm.
[2017-08-15 13:33:22] Starting Stratum on stratum+tcp://45.32.171.89:3333
[2017-08-15 13:33:22] Binding thread 0 to cpu 0
[2017-08-15 13:33:22] Binding thread 1 to cpu 1
[2017-08-15 13:33:23] GPU #1: GeForce GTX 1060 3GB, 1596.10 H/s
[2017-08-15 13:33:23] GPU #0: GeForce GTX 1060 3GB, 1129.99 H/s
[2017-08-15 13:33:35] GPU #0: GeForce GTX 1060 3GB, 5771.00 H/s
[2017-08-15 13:33:39] GPU #1: GeForce GTX 1060 3GB, 5773.24 H/s
[2017-08-15 13:33:56] Pool set diff to 100
[2017-08-15 13:33:56] Stratum detected new block
[2017-08-15 13:33:56] GPU #1: GeForce GTX 1060 3GB, 5780.94 H/s
[2017-08-15 13:33:56] GPU #0: GeForce GTX 1060 3GB, 5797.06 H/s
[2017-08-15 13:34:56] GPU #1: GeForce GTX 1060 3GB, 5740.04 H/s
[2017-08-15 13:34:56] GPU #0: GeForce GTX 1060 3GB, 5748.11 H/s
[2017-08-15 13:35:56] Stratum connection timed out
[2017-08-15 13:35:56] Stratum connection interrupted
[2017-08-15 13:35:56] GPU #1: GeForce GTX 1060 3GB, 5774.43 H/s
[2017-08-15 13:35:56] GPU #0: GeForce GTX 1060 3GB, 5772.95 H/s
[2017-08-15 13:36:22] Stratum detected new block
[2017-08-15 13:36:22] GPU #1: GeForce GTX 1060 3GB, 5754.76 H/s
[2017-08-15 13:36:22] GPU #0: GeForce GTX 1060 3GB, 5775.68 H/s
[2017-08-15 13:37:23] GPU #1: GeForce GTX 1060 3GB, 5726.57 H/s
[2017-08-15 13:37:23] GPU #0: GeForce GTX 1060 3GB, 5731.76 H/s

No matter what I do, I cannot get any shares? What could be the issue?

WOW! How do you get 5.7 kH/s for gtx 1060? what miner you use?

See above, pool was temporarily not finding blocks due to some rogue transactions. I don't believe it was an attack but rather just some sort of error related to me restarting the pool with so many miners sending traffic. Whatever the case, you should be getting shares now, let me know.

I've been mining for 40 minutes and I haven't seen any coins, yet the pool says I'm submitting.

I would suggest using the pool front-end to check the balance for your address - also verify it is showing a hash rate etc.

[Xdragon]

Miners, Please use port 5555 or 7777. With port 3333 we are flooding pool with low dif shares.

[xs.over]

Please add STATIC DIFFICULTY to pool
Pool's ports have very low shares diff. Should be at least 10K +

[SokrieeE]

what is different between INTENSE COIN  and other Tor based coin ? thanks

[Chisinau]

Miners, Please use port 5555 or 7777. With port 3333 we are flooding pool with low dif shares.

Which one to use 5555 or 7777 ? How to know ? 

[jackwillwin]

I encourage everyone to join our Slack channel (link in first post) where you will get much more up-to-date information than here

The blockchain encountered some bad transactions in the 396 block. I restarted the seed nodes and resync'd the daemons and now blocks are being found once again.

Apologies for the troubles, I know this is frustrating for all of you. Please know I share your frustration. Lol.

Code:

2017-08-15 13:33:22] 2 miner threads started, using 'cryptonight' algorithm.
[2017-08-15 13:33:22] Starting Stratum on stratum+tcp://45.32.171.89:3333
[2017-08-15 13:33:22] Binding thread 0 to cpu 0
[2017-08-15 13:33:22] Binding thread 1 to cpu 1
[2017-08-15 13:33:23] GPU #1: GeForce GTX 1060 3GB, 1596.10 H/s
[2017-08-15 13:33:23] GPU #0: GeForce GTX 1060 3GB, 1129.99 H/s
[2017-08-15 13:33:35] GPU #0: GeForce GTX 1060 3GB, 5771.00 H/s
[2017-08-15 13:33:39] GPU #1: GeForce GTX 1060 3GB, 5773.24 H/s
[2017-08-15 13:33:56] Pool set diff to 100
[2017-08-15 13:33:56] Stratum detected new block
[2017-08-15 13:33:56] GPU #1: GeForce GTX 1060 3GB, 5780.94 H/s
[2017-08-15 13:33:56] GPU #0: GeForce GTX 1060 3GB, 5797.06 H/s
[2017-08-15 13:34:56] GPU #1: GeForce GTX 1060 3GB, 5740.04 H/s
[2017-08-15 13:34:56] GPU #0: GeForce GTX 1060 3GB, 5748.11 H/s
[2017-08-15 13:35:56] Stratum connection timed out
[2017-08-15 13:35:56] Stratum connection interrupted
[2017-08-15 13:35:56] GPU #1: GeForce GTX 1060 3GB, 5774.43 H/s
[2017-08-15 13:35:56] GPU #0: GeForce GTX 1060 3GB, 5772.95 H/s
[2017-08-15 13:36:22] Stratum detected new block
[2017-08-15 13:36:22] GPU #1: GeForce GTX 1060 3GB, 5754.76 H/s
[2017-08-15 13:36:22] GPU #0: GeForce GTX 1060 3GB, 5775.68 H/s
[2017-08-15 13:37:23] GPU #1: GeForce GTX 1060 3GB, 5726.57 H/s
[2017-08-15 13:37:23] GPU #0: GeForce GTX 1060 3GB, 5731.76 H/s

No matter what I do, I cannot get any shares? What could be the issue?

WOW! How do you get 5.7 kH/s for gtx 1060? what miner you use?

See above, pool was temporarily not finding blocks due to some rogue transactions. I don't believe it was an attack but rather just some sort of error related to me restarting the pool with so many miners sending traffic. Whatever the case, you should be getting shares now, let me know.

I've been mining for 40 minutes and I haven't seen any coins, yet the pool says I'm submitting.

I would suggest using the pool front-end to check the balance for your address - also verify it is showing a hash rate etc.

Still no shares

[Xdragon]

Miners, Please use port 5555 or 7777. With port 3333 we are flooding pool with low dif shares.

Which one to use 5555 or 7777 ? How to know ? 

if you are asking this, than 5555    Unless you have large mining farm, then use 7777

[lupanar]

Pool is down again...Damn people, just do not use port 3333 at all for smooth mining please!

[^BuTcH^]

I'm trying 5555 and it works!

[Chisinau]

Miners, Please use port 5555 or 7777. With port 3333 we are flooding pool with low dif shares.

Which one to use 5555 or 7777 ? How to know ? 

if you are asking this, than 5555    Unless you have large mining farm, then use 7777

For 6 x RX 480 for example how much is better ?  

[nizzuu]

Devs, just set ports diff to:
low - 2000
med - 10000
high - ...

And we won't be ddosing the pool.

[sureken32]

My 1070 use 60 000,100 000 stratum difficulty.

[valiant1]

Devs, just set ports diff to:
low - 2000
med - 10000
high - ...

And we won't be ddosing the pool.

I did go ahead and update the difficulty configuration for the ports per your recommendations, thanks! I want to hold off on restarting the pool, though, which is required to load the new configuration, as every time I restart it people get very excited here.  

Pool is down again...Damn people, just do not use port 3333 at all for smooth mining please!

Pool was down because I took it down. It was stalled due to some bad txns in the blockchain. Pool isn't being DDoS'd yet

I encourage everyone to join our Slack channel (link in first post) where you will get much more up-to-date information than here

The blockchain encountered some bad transactions in the 396 block. I restarted the seed nodes and resync'd the daemons and now blocks are being found once again.

Apologies for the troubles, I know this is frustrating for all of you. Please know I share your frustration. Lol.

Code:

2017-08-15 13:33:22] 2 miner threads started, using 'cryptonight' algorithm.
[2017-08-15 13:33:22] Starting Stratum on stratum+tcp://45.32.171.89:3333
[2017-08-15 13:33:22] Binding thread 0 to cpu 0
[2017-08-15 13:33:22] Binding thread 1 to cpu 1
[2017-08-15 13:33:23] GPU #1: GeForce GTX 1060 3GB, 1596.10 H/s
[2017-08-15 13:33:23] GPU #0: GeForce GTX 1060 3GB, 1129.99 H/s
[2017-08-15 13:33:35] GPU #0: GeForce GTX 1060 3GB, 5771.00 H/s
[2017-08-15 13:33:39] GPU #1: GeForce GTX 1060 3GB, 5773.24 H/s
[2017-08-15 13:33:56] Pool set diff to 100
[2017-08-15 13:33:56] Stratum detected new block
[2017-08-15 13:33:56] GPU #1: GeForce GTX 1060 3GB, 5780.94 H/s
[2017-08-15 13:33:56] GPU #0: GeForce GTX 1060 3GB, 5797.06 H/s
[2017-08-15 13:34:56] GPU #1: GeForce GTX 1060 3GB, 5740.04 H/s
[2017-08-15 13:34:56] GPU #0: GeForce GTX 1060 3GB, 5748.11 H/s
[2017-08-15 13:35:56] Stratum connection timed out
[2017-08-15 13:35:56] Stratum connection interrupted
[2017-08-15 13:35:56] GPU #1: GeForce GTX 1060 3GB, 5774.43 H/s
[2017-08-15 13:35:56] GPU #0: GeForce GTX 1060 3GB, 5772.95 H/s
[2017-08-15 13:36:22] Stratum detected new block
[2017-08-15 13:36:22] GPU #1: GeForce GTX 1060 3GB, 5754.76 H/s
[2017-08-15 13:36:22] GPU #0: GeForce GTX 1060 3GB, 5775.68 H/s
[2017-08-15 13:37:23] GPU #1: GeForce GTX 1060 3GB, 5726.57 H/s
[2017-08-15 13:37:23] GPU #0: GeForce GTX 1060 3GB, 5731.76 H/s

No matter what I do, I cannot get any shares? What could be the issue?

WOW! How do you get 5.7 kH/s for gtx 1060? what miner you use?

See above, pool was temporarily not finding blocks due to some rogue transactions. I don't believe it was an attack but rather just some sort of error related to me restarting the pool with so many miners sending traffic. Whatever the case, you should be getting shares now, let me know.

I've been mining for 40 minutes and I haven't seen any coins, yet the pool says I'm submitting.

I would suggest using the pool front-end to check the balance for your address - also verify it is showing a hash rate etc.

Still no shares

I'm sorry, I really don't know what to tell you other than to try a different miner. There aren't many GPU miners that work on cryptonight. I can only endorse the one built into the tool, and cpuminer-multi by tpruvot as I know both work. It looks like you're trying CCminer - I think ccminer has issues with cryptonight.

[rk80]

Dev,

 Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e

The coins refuse to confirm

On my wallet it has no transaction time, only amount...

Thanks.

[mainconcept]

Dev,

 Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e

The coins refuse to confirm

On my wallet it has no transaction time, only amount...

Thanks.

I have the same issue with the same TX D8753202AA0A6FE4AA64D3BD8A0B506F37001C406104F4FE2E5032049640DD2E

Amount: 1,344.00 INTNS

[nizzuu]

I did go ahead and update the difficulty configuration for the ports per your recommendations, thanks! I want to hold off on restarting the pool, though, which is required to load the new configuration, as every time I restart it people get very excited here.  

It's OK for now, thanx, bro If you wanna the UI side to be updated, this could be done later, when people go less excited (the network difficulty I mean )

[aviz123]

Zotac 1080 AMP extreme.. giving 412 H/s only.. Why is that ? too low i think

I am using 7777 block..

[felipelago]

Pool down again, everytime this shit pool will down ? serious this ?

[flyin_piggie]

Zotac 1080 AMP extreme.. giving 412 H/s only.. Why is that ? too low i think

I am using 7777 block..

My 1080 underclocked does about 435 H/s, cryptonight algo is not very GPU friendly. Haswell i7 does about 140 H/s.

On 'brighter' note, wondering if pool is stuck again, or it's just difficuly ramped up...