Bitcloud 2.0 - BTDX - PoS3 - Newest Masternode Core 12.2 - Quark

[Jack2512]

what should I do to have support in this community?

I cant give too much help about Bitcloud, but what have you done to check your masternode?

1) Verified that your client is all synced up?
2) Verified that your hot node is ok?
3) Is your node present in the masternode list?
4) What does

Code:

bitcloud-cli mnsync status

give you?
5) On the VPS, what does

Code:

bitcloud-cli masternode status

say?

It's hard for others to help you mate unless you can give any info on your setup, what you have done to check things etc etc...

Ok ..i repeat:

i have a node on a vps windows machine. the node is active. But in not visible on other portofio, and not pay reward. is it difficult made a complete and clear example guide for the bitcloud masternode?a video? I follow the setup in the home page of this 3d , but from 2 days to now i have made more attempts... but i can not understand the reason that not work fine. I want support the project but i need more help from the community.  

Please be patient

From the wallet, click Masternodes, go to All Masternode Tab, filter by your IP or wallet address. If you don't see it there then your masternode is not good. If you see it there, make sure timer under Active column is incrementing, check it every 15-30 minutes. If it is incrementing, you will earn rewards.

I know that is not good, but no one explane me how to resolve the problem. The time incrementing regulary, but the node in not visible under the list from other client, only on the client of the vps.
if no one respond me here or on slack , i'm forced to leave this coin, becuse there is no support to the investors.

[captainbluff]

what should I do to have support in this community?

I cant give too much help about Bitcloud, but what have you done to check your masternode?

1) Verified that your client is all synced up?
2) Verified that your hot node is ok?
3) Is your node present in the masternode list?
4) What does

Code:

bitcloud-cli mnsync status

give you?
5) On the VPS, what does

Code:

bitcloud-cli masternode status

say?

It's hard for others to help you mate unless you can give any info on your setup, what you have done to check things etc etc...

Ok ..i repeat:

i have a node on a vps windows machine. the node is active. But in not visible on other portofio, and not pay reward. is it difficult made a complete and clear example guide for the bitcloud masternode?a video? I follow the setup in the home page of this 3d , but from 2 days to now i have made more attempts... but i can not understand the reason that not work fine. I want support the project but i need more help from the community.  

Please be patient

From the wallet, click Masternodes, go to All Masternode Tab, filter by your IP or wallet address. If you don't see it there then your masternode is not good. If you see it there, make sure timer under Active column is incrementing, check it every 15-30 minutes. If it is incrementing, you will earn rewards.

I know that is not good, but no one explane me how to resolve the problem. The time incrementing regulary, but the node in not visible under the list from other client, only on the client of the vps.
if no one respond me here or on slack , i'm forced to leave this coin, becuse there is no support to the investors.

Do you have the same version of the wallet?

[kdepfyffer]

I have 2 masternodes running - they will run for a while get a reward then go into staking mode, I'll get a payment then have to wait for it to mature before I can refund the masternode and start node again this happens everytime - running hot node no wallet on ubuntu vps - any way to disable staking starting up - I can make a script to restart node if it goes down but dont want to have it checking every minute

thanks

[captainbluff]

Dev, please look into possible memory leak on windows client and address on next release. After letting it run for several hours memory usage goes up  between 1GB to 2GB. This is happening on Windows 7 and Windows 2016.

[alinka1]

I have 2 masternodes running - they will run for a while get a reward then go into staking mode, I'll get a payment then have to wait for it to mature before I can refund the masternode and start node again this happens everytime - running hot node no wallet on ubuntu vps - any way to disable staking starting up - I can make a script to restart node if it goes down but dont want to have it checking every minute

thanks

Lock your wallet, then it wont stake.

[alinka1]

Dev, please look into possible memory leak on windows client and address on next release. After letting it run for several hours memory usage goes up  between 1GB to 2GB. This is happening on Windows 7 and Windows 2016.

Try to set maxconnections=10 in conf file.

[captainbluff]

Dev, please look into possible memory leak on windows client and address on next release. After letting it run for several hours memory usage goes up  between 1GB to 2GB. This is happening on Windows 7 and Windows 2016.

Try to set maxconnections=10 in conf file.

Thanks I will try.

[captainbluff]

I have 2 masternodes running - they will run for a while get a reward then go into staking mode, I'll get a payment then have to wait for it to mature before I can refund the masternode and start node again this happens everytime - running hot node no wallet on ubuntu vps - any way to disable staking starting up - I can make a script to restart node if it goes down but dont want to have it checking every minute

thanks

Lock your wallet, then it wont stake.

So you can actually earn stake and masternode rewards if staking is enabled?

[kdepfyffer]

I have 2 masternodes running - they will run for a while get a reward then go into staking mode, I'll get a payment then have to wait for it to mature before I can refund the masternode and start node again this happens everytime - running hot node no wallet on ubuntu vps - any way to disable staking starting up - I can make a script to restart node if it goes down but dont want to have it checking every minute

thanks

Lock your wallet, then it wont stake.

So you can actually earn stake and masternode rewards if staking is enabled?

no, once it starts staking you will no longer have a working masternode, you will only be staking.

[kdepfyffer]

I have 2 masternodes running - they will run for a while get a reward then go into staking mode, I'll get a payment then have to wait for it to mature before I can refund the masternode and start node again this happens everytime - running hot node no wallet on ubuntu vps - any way to disable staking starting up - I can make a script to restart node if it goes down but dont want to have it checking every minute

thanks

Lock your wallet, then it wont stake.

crap, thanks for that :-)

[Jack2512]

what should I do to have support in this community?

I cant give too much help about Bitcloud, but what have you done to check your masternode?

1) Verified that your client is all synced up?
2) Verified that your hot node is ok?
3) Is your node present in the masternode list?
4) What does

Code:

bitcloud-cli mnsync status

give you?
5) On the VPS, what does

Code:

bitcloud-cli masternode status

say?

It's hard for others to help you mate unless you can give any info on your setup, what you have done to check things etc etc...

Ok ..i repeat:

i have a node on a vps windows machine. the node is active. But in not visible on other portofio, and not pay reward. is it difficult made a complete and clear example guide for the bitcloud masternode?a video? I follow the setup in the home page of this 3d , but from 2 days to now i have made more attempts... but i can not understand the reason that not work fine. I want support the project but i need more help from the community.  

Please be patient

From the wallet, click Masternodes, go to All Masternode Tab, filter by your IP or wallet address. If you don't see it there then your masternode is not good. If you see it there, make sure timer under Active column is incrementing, check it every 15-30 minutes. If it is incrementing, you will earn rewards.

I know that is not good, but no one explane me how to resolve the problem. The time incrementing regulary, but the node in not visible under the list from other client, only on the client of the vps.
if no one respond me here or on slack , i'm forced to leave this coin, becuse there is no support to the investors.

Do you have the same version of the wallet?

I have the last windows version downloaded from the bitcloud site.

[shareef790]

Hi guys, I am new to Bitcloud masternode, yesterday I have installed this masternode but the VPS was not installed.  Today morning I got a stake of 60 coins which is great.  I hired a person to install VPS on Ubuntu and it is successfully installed there.  When I started my Windows wallet, it is syncing 100% but then 'not responding' when I clicked on staking it shows 'staking not active' - Can anyone please help me how to resolve this issue on the cold storage wallet please - I will attach the screenshot thanks in advance  here is the screenshot: https://imgur.com/a/UOXsL

[110110101]

what should I do to have support in this community?

I cant give too much help about Bitcloud, but what have you done to check your masternode?

1) Verified that your client is all synced up?
2) Verified that your hot node is ok?
3) Is your node present in the masternode list?
4) What does

Code:

bitcloud-cli mnsync status

give you?
5) On the VPS, what does

Code:

bitcloud-cli masternode status

say?

It's hard for others to help you mate unless you can give any info on your setup, what you have done to check things etc etc...

Ok ..i repeat:

i have a node on a vps windows machine. the node is active. But in not visible on other portofio, and not pay reward. is it difficult made a complete and clear example guide for the bitcloud masternode?a video? I follow the setup in the home page of this 3d , but from 2 days to now i have made more attempts... but i can not understand the reason that not work fine. I want support the project but i need more help from the community.  

Please be patient

From the wallet, click Masternodes, go to All Masternode Tab, filter by your IP or wallet address. If you don't see it there then your masternode is not good. If you see it there, make sure timer under Active column is incrementing, check it every 15-30 minutes. If it is incrementing, you will earn rewards.

I know that is not good, but no one explane me how to resolve the problem. The time incrementing regulary, but the node in not visible under the list from other client, only on the client of the vps.
if no one respond me here or on slack , i'm forced to leave this coin, becuse there is no support to the investors.

Do you have the same version of the wallet?

I have the last windows version downloaded from the bitcloud site.

What was the output from the commands posted above? They can help you pin down the problems with your masternode.
4) What does

Code:

bitcloud-cli mnsync status

give you?
5) On the VPS, what does

Code:

bitcloud-cli masternode status

say?

[galixxx]

i have staking=1 in my conf file. what else must be there in order to start staking?

[shareef790]

root@BitCloud:~# bitcloud-cli mnsync status
{
    "IsBlockchainSynced" : true,
    "lastMasternodeList" : 1509623426,
    "lastMasternodeWinner" : 1509625188,
    "lastBudgetItem" : 0,
    "lastFailure" : 0,
    "nCountFailures" : 0,
    "sumMasternodeList" : 1228,
    "sumMasternodeWinner" : 19026,
    "sumBudgetItemProp" : 0,
    "sumBudgetItemFin" : 0,
    "countMasternodeList" : 4,
    "countMasternodeWinner" : 6,
    "countBudgetItemProp" : 5,
    "countBudgetItemFin" : 5,
    "RequestedMasternodeAssets" : 999,
    "RequestedMasternodeAttempt" : 0
}

[shareef790]

root@BitCloud:~# bitcloud-cli masternode status
{
    "vin" : "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
    "service" : "[::]:0",
    "status" : "Not capable masternode: Hot node, waiting for remote activation."
}

The above 2 commands say as given above.  Thanks

[shareef790]

I found one issue: the total btdx was more than 10k and now i removed extra ones and put exactly 10k and staking is active now but masternode is not.  When put this command, I am getting the following message:

root@BitCloud:~# bitcloud-cli masternode status
{
    "vin" : "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
    "service" : "[::]:0",
    "status" : "Not capable masternode: Hot node, waiting for remote activation."
}

Do I need to wait for sometime before the masternode becomes active?
Staking is now active.  Kindly help thanks

[darkomega69]

I found one issue: the total btdx was more than 10k and now i removed extra ones and put exactly 10k and staking is active now but masternode is not.  When put this command, I am getting the following message:

root@BitCloud:~# bitcloud-cli masternode status
{
    "vin" : "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
    "service" : "[::]:0",
    "status" : "Not capable masternode: Hot node, waiting for remote activation."
}

Do I need to wait for sometime before the masternode becomes active?
Staking is now active.  Kindly help thanks

after you transferred the 10k, did you update your masternode.conf in the local wallet?

you'll need to update both the collateral_output_txid and collateral_output_index.

[shareef790]

Now when I put the masternode outputs, I am getting the following:
-------------------------------------

01:09:32

Welcome to the BTDX RPC console.
Use up and down arrows to navigate history, and Ctrl-L to clear screen.
Type help for an overview of available commands.


07:24:34

masternode outputs


07:24:34

{
}
----------------------------------------
There is nothing showing between the brackets.  What does that mean and how to fix that please?  Thx

[scutkippy]

What is the key idea of the project?