DigitalDoom
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 02:02:55 AM |
|
gnode - that is normal your miner reports the same difficulty in different units. 106k sounds about right for a difficulty of 1.66.
That can be solo mined but you will need some patience
Ya...OK, thanks much. I just don't understand some things with crypto/mining...wanted to check from others that I was setup right for DGC. I know patience is a rarity among folks in the crypto world where hours are days, days are weeks, weeks=months and a month is an eternity. However, life has beaten me into submission of patience. If 3 marriages and 4 kids (and now grandkids) don't teach patience to a man, I doubt anything will! ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
baritus (OP)
Legendary
Offline
Activity: 966
Merit: 1052
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 02:54:08 AM |
|
Have the p2pools looked at using common settings yet?
|
Digitalcoin - Sha256, Scrypt, x11 Mining - Multi-algorithm & One Click Masternodes - Founded in 2013
|
|
|
techbytes
Legendary
Offline
Activity: 1694
Merit: 1054
Point. Click. Blockchain
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 03:22:36 AM |
|
I just send 60DGC to DGC donation address
Thanks for your continuing support. Wiki updated. -tb-
|
|
|
|
ZeRo103
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 154
Merit: 100
Hack The Planet
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 04:24:21 AM |
|
YES ... WE CAN ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ... ZeRo103 in Campaign Mode Calling on the DGC Brotherhood ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) to vote in the next 24 hours for DGC on Vircurex https://bitcointalk.org/index.php?topic=215284.0We are just behind 8 votes to WorldCoin... Pool owners please send mass email if posible ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) We are ahead by 1 point ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ... last 13 Hours ... Vote DGC, Vote DGC ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
r3wt
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 04:46:37 AM |
|
Voted. Thanks for the DGC donations everyone sent me. I now am the proud owner of 13 DGC!!!
|
My negative trust rating is reflective of a personal vendetta by someone on default trust.
|
|
|
ninjarobots
Newbie
Offline
Activity: 57
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 05:07:23 AM |
|
Any DGC coin exchanges present??
|
|
|
|
CartmanSPC
Legendary
Offline
Activity: 1270
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 05:10:19 AM Last edit: May 31, 2013, 08:23:54 AM by CartmanSPC |
|
Have the p2pools looked at using common settings yet?
I would love to see that happen! I think it would be better for the network if the p2pools work together instead of independently. There seems to be a handful of pools using the hakabane fork that are already working together. Please correct these instructions if I'm wrong but this is what P2Pool operators need to do to connect to the pools that are already working together: 1. Modify p2pool/networks.py in the digitalcoin section to include: IDENTIFIER='a5aed03050126d6d'.decode('hex'), PREFIX='b6c0601991aa19a3'.decode('hex'), BOOTSTRAP_ADDRS='pool.bounceme.net'.split(' '), I am not sure if this is necessary but you may need to change: Open up that port to and from your p2pool server on the firewall (incoming/outgoing). You will need to delete the digitalcoin folder in the p2pool\Data directory before starting up p2pool. We should consider adding more servers to the BOOTSTRAP_ADDRS in case pool.bounceme.net is down.
|
|
|
|
r3wt
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 05:13:08 AM |
|
Any DGC coin exchanges present??
i bought a domain name and am planning on starting a crypto escrow. i need to raise alot of funds in currency first, so i'm going around begging all the different groups for donations, Lol
|
My negative trust rating is reflective of a personal vendetta by someone on default trust.
|
|
|
schnebi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 05:35:43 AM |
|
Have the p2pools looked at using common settings yet?
I would love to see that happen! I think it would be better for the network if the p2pools work together instead of independently. There seems to be a handful of pools using the hakabane fork that are already working together. Please correct these instructions if I'm wrong but this is what P2Pool operators need to do to connect to the pools that are already working together: 1. Modify p2pool/networks.py in the digitalcoin section to include: IDENTIFIER='a5aed03050126d6d'.decode('hex'), PREFIX='b6c0601991aa19a3'.decode('hex'), BOOTSTRAP_ADDRS='pool.bounceme.net'.split(' '), I am not sure about this part but I think you also need to change: Open up that port to and from your p2pool server on the firewall (incoming/outgoing). You will need to delete the digitalcoin folder in the p2pool\Data directory before starting up p2pool. We should consider adding more servers to the BOOTSTRAP_ADDRS in case pool.bounceme.net is down. I will give it a try when I'm home in a few hours. But last time, I chnaged my networks.py to work together with the other Pools, the performance of the pool got really bad. And the other pools had the same Problem.... BTW: My crypto-coins.de Pool is online with a new Domain: p2pool-mining.net:8907or check out all the pools at www.p2pool-mining.net
|
|
|
|
seleme
Legendary
Offline
Activity: 2772
Merit: 1028
Duelbits.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 05:37:27 AM |
|
Any DGC coin exchanges present??
Cryptsy
|
|
|
|
CartmanSPC
Legendary
Offline
Activity: 1270
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 06:06:32 AM Last edit: May 31, 2013, 08:24:48 AM by CartmanSPC |
|
I will give it a try when I'm home in a few hours. But last time, I chnaged my networks.py to work together with the other Pools, the performance of the pool got really bad. And the other pools had the same Problem....
I had the same thing happen to me! Disconnected from the other pools until tonight so will keep a close eye on it. BTW, what are you using for SPREAD? I don't think hackbanes setting of 72 is correct.
|
|
|
|
akabane
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 113
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 06:16:45 AM |
|
Have the p2pools looked at using common settings yet?
I would love to see that happen! I think it would be better for the network if the p2pools work together instead of independently. There seems to be a handful of pools using the hakabane fork that are already working together. Please correct these instructions if I'm wrong but this is what P2Pool operators need to do to connect to the pools that are already working together: 1. Modify p2pool/networks.py in the digitalcoin section to include: IDENTIFIER='a5aed03050126d6d'.decode('hex'), PREFIX='b6c0601991aa19a3'.decode('hex'), BOOTSTRAP_ADDRS='pool.bounceme.net'.split(' '), I am not sure about this part but I think you also need to change: Open up that port to and from your p2pool server on the firewall (incoming/outgoing). You will need to delete the digitalcoin folder in the p2pool\Data directory before starting up p2pool. We should consider adding more servers to the BOOTSTRAP_ADDRS in case pool.bounceme.net is down. I will give it a try when I'm home in a few hours. But last time, I chnaged my networks.py to work together with the other Pools, the performance of the pool got really bad. And the other pools had the same Problem.... BTW: My crypto-coins.de Pool is online with a new Domain: p2pool-mining.net:8907or check out all the pools at www.p2pool-mining.netThe best things to do is just to delete your current p2pool and take the updated to start from scratch : https://github.com/hakabane/p2pool-altcoins.gitYou will have some error if you do not do that (the shares persisted in the data dir will not match the current settings).
|
|
|
|
akabane
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 113
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 06:24:14 AM |
|
I will give it a try when I'm home in a few hours. But last time, I chnaged my networks.py to work together with the other Pools, the performance of the pool got really bad. And the other pools had the same Problem....
I had the same thing happen to me! Disconnect from the other pools until tonight so will keep a close eye on it. BTW, what are you using for SPREAD? I don't think hackbanes setting of 72 is correct. It can maybe be tuned better (because there is still a lot of orphan between nodes), but during my tests I have been able to have 2 nodes on differents network to work correctly with that settings (efficiency > 100%). You must wait a bit (like 24 hours) before seeing your real efficiency.
|
|
|
|
MobGod
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 07:19:23 AM |
|
I will give it a try when I'm home in a few hours. But last time, I chnaged my networks.py to work together with the other Pools, the performance of the pool got really bad. And the other pools had the same Problem....
I had the same thing happen to me! Disconnect from the other pools until tonight so will keep a close eye on it. BTW, what are you using for SPREAD? I don't think hackbanes setting of 72 is correct. It can maybe be tuned better (because there is still a lot of orphan between nodes), but during my tests I have been able to have 2 nodes on differents network to work correctly with that settings (efficiency > 100%). You must wait a bit (like 24 hours) before seeing your real efficiency. Ok I've been trying this for a couple days now anyone have the correct settings? I'm trying to connect to a pool that's close to me
|
|
|
|
Xmansk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 07:37:20 AM |
|
I just send 60DGC to DGC donation address
Thanks for your continuing support. Wiki updated. -tb- Hm i can't see it on wiki.
|
BTC: 13VR6e4XaGGhwq6LMGuFYdQWM5FwVqKSDY LTC: LWyrhxuxJk8rVnGaUP98xPhVg445Qka1qr DGC: DNgv3ZYpCwQR8spfgwANc8vAExq7danf7W
|
|
|
AbiTxGroup
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 07:49:46 AM |
|
gnode - that is normal your miner reports the same difficulty in different units. 106k sounds about right for a difficulty of 1.66.
That can be solo mined but you will need some patience
Ya...OK, thanks much. I just don't understand some things with crypto/mining...wanted to check from others that I was setup right for DGC. I know patience is a rarity among folks in the crypto world where hours are days, days are weeks, weeks=months and a month is an eternity. However, life has beaten me into submission of patience. If 3 marriages and 4 kids (and now grandkids) don't teach patience to a man, I doubt anything will! ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I like this. I was in the forums here and had my first miner up an running for about a month before I finally created an account to post. I read and do more than post, well, until I have had a few beers, then I read and type a lot. I have had 2 marriages, 4 kids (2 step) and 1 granddaughter. Patience yes. Plus, computers dont talk to much, so I spend a lot of time with them and have been doing so for over 30 years now. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
|
|
|
|
sron
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 07:51:16 AM |
|
I would be interested in exchanging DGC for GIT and/or other types of co-operations between coin issuers (see link in signature).
|
|
|
|
|
mullick
Legendary
Offline
Activity: 1064
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 09:57:04 AM |
|
I figured it out. You have to click create thumbnail and make sure the defualt box is checked. It's in the directions i just never read them
|
|
|
|
techbytes
Legendary
Offline
Activity: 1694
Merit: 1054
Point. Click. Blockchain
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2013, 10:02:57 AM |
|
I just send 60DGC to DGC donation address
Thanks for your continuing support. Wiki updated. -tb- Hm i can't see it on wiki. That's because I added it to the other Xman... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) It's on there now. -tb-
|
|
|
|
|