[ANN]❁ KORE Tor Masternodes, Browser, VoIP, Aether OS, KOREPhone, KOREbay Funded

[BitWhat]

Wow the swap was easy. Thanks MikeMike and everyone involved with Kore!! you guys Rock!! Like the new OP as well..mesh network..whooo me like 

[1715157736]

1715157736

[1715157736]

1715157736

[1715157736]

1715157736

[drager007]

why i'm getting API Configuration unsuccessful i tried it many times sorry but im new to this?

i went to Bittrex setting ---------> API ------> new key (copy) --------> paste on the Wallet(trade window) (setting) ----> unsuccessful ??


Am i missing something ??
 

[TheMatrix101]

why i'm getting API Configuration unsuccessful i tried it many times sorry but im new to this?

i went to Bittrex setting ---------> API ------> new key (copy) --------> paste on the Wallet(trade window) (setting) ----> unsuccessful ??


Am i missing something ??
 

make sure there are no spaces and try doubleclicking or just retry a few times, When I configured this it didnt accept the first time but it accepted the second time (probably slow network and it unable to confirm)

Matrix

[coinstak3r]

@TheMatrix101

I think a little troubleshooting guide is needed (especially for not experts like me)

My experience with the new wallet:
1) Installing and importing the old wallet.dat file was ok
2) The balance differs from the old wallet: currently I miss the coin staked after the 14th October.
3) The old txt guide (it has been deleted) posted by MikeMike said about an option to add by command line (-zapwallettxes).
I've tried to run by commandline:
kore-qt.exe -zapwallettxes
and
kore-qt.exe -zapwallettxes=1

And nothing is changed.
I've not tried -zapwallettxes=2 but I think it will not change the things.

4) I've added the row "listen=0" (without "") at the end of kore.conf and now the wallet can be closed without problems (just few seconds to complete the closing procedure).
5) I've added the row "staking=1" (without "") at the end of kore.conf but it doesn't start in staking mode by default.
I've tried also to run kore-qt.exe -staking=1 but nothing is changed.
- So I went to setting-->Unlock Wallet --> type the password and check the box "for anonym.. and staking only"
The fist icon in lower right side says: "wallet is encrypted and currently unlocked for anonimization and staking only"
The next icon says: "Stacking is not Active. Multisend: not active"

I guess that in the next hours the stacking will be active and also the balance will be updated with the old coins staked from 14th October to today.

Please confirm, I'm sure your answer will be helpful not just to me.
thank you

[TheMatrix101]

@TheMatrix101

I think a little troubleshooting guide is needed (especially for not experts like me)

My experience with the new wallet:
1) Installing and importing the old wallet.dat file was ok
2) The balance differs from the old wallet: currently I miss the coin staked after the 14th October.
3) The old txt guide (it has been deleted) posted by MikeMike said about an option to add by command line (-zapwallettxes).
I've tried to run by commandline:
kore-qt.exe -zapwallettxes
and
kore-qt.exe -zapwallettxes=1

And nothing is changed.
I've not tried -zapwallettxes=2 but I think it will not change the things.

4) I've added the row "listen=0" (without "") at the end of kore.conf and now the wallet can be closed without problems (just few seconds to complete the closing procedure).
5) I've added the row "staking=1" (without "") at the end of kore.conf but it doesn't start in staking mode by default.
I've tried also to run kore-qt.exe -staking=1 but nothing is changed.
- So I went to setting-->Unlock Wallet --> type the password and check the box "for anonym.. and staking only"
The fist icon in lower right side says: "wallet is encrypted and currently unlocked for anonimization and staking only"
The next icon says: "Stacking is not Active. Multisend: not active"

I guess that in the next hours the stacking will be active and also the balance will be updated with the old coins staked from 14th October to today.

Please confirm, I'm sure your answer will be helpful not just to me.
thank you

1) Great, that's the way it should be
2) Remove all blockchain files and then run with zapwallettxes (by default when this is run =1 is selected, DO NOT RUN =2!)
4) Great, again, how it should be. We are looking more into this.
5) Coins require 4 hours to mature then are sent out every four hours. you will almost never see "staking is active" even when the balance for stake is up the "staking is active" blinks for just a moment, this is also being looked into. however, if the strain on the network is not too high, and you have the coin, and wallet is not locked, your coins will go out to stake every four hours (after maturing.)

Matrix

[coinstak3r]

@TheMatrix101

I think a little troubleshooting guide is needed (especially for not experts like me)

My experience with the new wallet:
1) Installing and importing the old wallet.dat file was ok
2) The balance differs from the old wallet: currently I miss the coin staked after the 14th October.
3) The old txt guide (it has been deleted) posted by MikeMike said about an option to add by command line (-zapwallettxes).
I've tried to run by commandline:
kore-qt.exe -zapwallettxes
and
kore-qt.exe -zapwallettxes=1

And nothing is changed.
I've not tried -zapwallettxes=2 but I think it will not change the things.

4) I've added the row "listen=0" (without "") at the end of kore.conf and now the wallet can be closed without problems (just few seconds to complete the closing procedure).
5) I've added the row "staking=1" (without "") at the end of kore.conf but it doesn't start in staking mode by default.
I've tried also to run kore-qt.exe -staking=1 but nothing is changed.
- So I went to setting-->Unlock Wallet --> type the password and check the box "for anonym.. and staking only"
The fist icon in lower right side says: "wallet is encrypted and currently unlocked for anonimization and staking only"
The next icon says: "Stacking is not Active. Multisend: not active"

I guess that in the next hours the stacking will be active and also the balance will be updated with the old coins staked from 14th October to today.

Please confirm, I'm sure your answer will be helpful not just to me.
thank you

1) Great, that's the way it should be
2) Remove all blockchain files and then run with zapwallettxes (by default when this is run =1 is selected, DO NOT RUN =2!)
4) Great, again, how it should be. We are looking more into this.
5) Coins require 4 hours to mature then are sent out every four hours. you will almost never see "staking is active" even when the balance for stake is up the "staking is active" blinks for just a moment, this is also being looked into. however, if the strain on the network is not too high, and you have the coin, and wallet is not locked, your coins will go out to stake every four hours (after maturing.)

Matrix

2) They are stored into ....AppData\Roaming\Kore\blocks\ , right?
There I have also a subfolder called "index" and two files: blk00000.dat and rev00000.dat
I guess I must close the wallet, delete just the blk00000.dat and run again with zapwallettxes, right?

Thank you

[TheMatrix101]

Delete the folders "blocks" "chainstates" and "backups" then start the wallet with -reindex. That should do it.


Matrix

[coinstak3r]

Delete the folders "blocks" "chainstates" and "backups" then start the wallet with -reindex. That should do it.


Matrix

Ok, so the option -zapwallettxes isn't needed anymore?

[TheMatrix101]

Try with both.

[penambang]

This is weird, my vps nodes stuck on block 1313, same as chainz.

[Johnny00]

Thanks, Really easy wallet download and conversion. Staking and supporting

[JhnsnVolk]

Whats going on with the prices? After a fast pump the prices go down again...
I believe in this project, but this prices are really depressive. 

[Johnny00]

Delete the folders "blocks" "chainstates" and "backups" then start the wallet with -reindex. That should do it.


Matrix

Whats -reindex

[andy84uk]

Whats going on with the prices? After a fast pump the prices go down again...
I believe in this project, but this prices are really depressive. 

It was probably some frustrated holders that had their coins stuck in their wallets for the last couple of weeks. Personally id rather see the back of any holders that are that quick to ditch their holdings once good news arrives.

[coinstak3r]

Whats going on with the prices? After a fast pump the prices go down again...
I believe in this project, but this prices are really depressive. 

I also believe in this project.
I don't understand why people are selling.
2Millions coins currently, Masternodes very soon and more news...
Currently with about 2500$ you can have your masternode and make nice profit in the future.
I'm not an expert.. but I know that a masternode get a good % return (I'd to like to know how it's determined).

Currently Monero has a marketcap of $1.35bln
If Kore reaches just the 10% of Monero's marketcap, that means 1 Kore ~ $70
Try to imagine if it reaches the 20-30-40% of Monero's marketcap!
I hope my calculations are right! 

I hope Kore will be listed soon in some new exchanges so more people can know about the coin and its community and devs!

[CryptoJohn]

1) OMG you price noobs are annoying as shit.
2) Open wallet with stake=1 in conf, unlock wallet and support the network like team is asking.

[coinstak3r]

1) OMG you price noobs are annoying as shit.
2) Open wallet with stake=1 in conf, unlock wallet and support the network like team is asking.

If you refer to my post:

1) I'm sorry if you feel annoyed by these calculations. That's simply my considerations. Maybe they can help some "weak hands"   
2) already did, dear! 

[CryptoJohn]

1) OMG you price noobs are annoying as shit.
2) Open wallet with stake=1 in conf, unlock wallet and support the network like team is asking.

If you refer to my post:

1) I'm sorry if you feel annoyed by these calculations. That's simply my considerations. Maybe they can help some "weak hands"   
2) already did, dear! 

not you 

I actually agree with your cap speculative numbers.

Im commenting on the whiners above "whats wrong with price", "mikemike hasn't made me a millionaire yet" ect.

[CryptoJohn]

Delete the folders "blocks" "chainstates" and "backups" then start the wallet with -reindex. That should do it.


Matrix

Whats -reindex

This comment concerns me as you have 500+ posts and are advertising for something crypto in your avatar

In windows after shift right click choose "open cmd window here" > type "kore-qt -reindex. This will rebuild blockchain index from current blk000.dat files on startup.

[1978280z]

http://i63.tinypic.com/24320lg.png

 

FYI:  Seems to only blink green every few minutes.