[ANN] ETHASH Miner - Eminer v0.6.1-RC2 Released (Windows, Linux, MacOS)

[laik2]

Enhancements request:
1. Ability to change API port.
2. Ability to use failover stratum.
3. Ability to see incorrect gpu solutions like accepted/rejected/incorrect.
4. DevFee switch notice and ETC devfee mining without DAG switch.
Feature request:
 Watchdog on GPU failure
Thats it for now.

[1713522469]

1713522469

[1713522469]

1713522469

[1713522469]

1713522469

[1713522469]

1713522469

[kcopcu]

Enhancements request:
1. Ability to change API port.
2. Ability to use failover stratum.
3. Ability to see incorrect gpu solutions like accepted/rejected/incorrect.
4. DevFee switch notice and ETC devfee mining without DAG switch.
Feature request:
 Watchdog on GPU failure
Thats it for now.

I tried yesterday on my laptop . They've already changing port API and failover stratum usage .

HTTP Port change :
eminer.exe -http :80

Stratum failover :

eminer -S eu1.ethermine.org:4444,us1.ethermine.org:4444

[christianCoder]

How can we verify this is only taking out a 1% dev fee? And what is the frequency of the 1% cut vs Claymore?

Even with the slightly higher hashrates, in comparison to Claymore, looks like Eminer profitability is much lower per my Ethermine.org Payout/Rounds dashboard. Also looks like Ether balance accumulates slower on this vs Claymore.

Has anyone else here noticed this? Taking "1%" every 10 minutes is very different from taking 1% every hour.

Please verify and respond.

[smparo]

How can we verify this is only taking out a 1% dev fee? And what is the frequency of the 1% cut vs Claymore?

Even with the slightly higher hashrates, in comparison to Claymore, looks like Eminer profitability is much lower per my Ethermine.org Payout/Rounds dashboard. Also looks like Ether balance accumulates slower on this vs Claymore.

Has anyone else here noticed this? Taking "1%" every 10 minutes is very different from taking 1% every hour.

Please verify and respond.

I'm just talking about windows eminer
I notice that some times eminer write devfee on the log but I did not understand how often this is done (I seem to remember after a few hours that I had started it). You can search on your eminer console with CTRL+F.
Also for the profitability there is a problem: every day there are increase of difficulty!
https://www.coinwarz.com/difficulty-charts/ethereum-difficulty-chart

For me anyway the share is much more constant and with Claymore my average hashrate over the last 24 hours on ethermine was 57.4 and now with eminer is 59.2MH/s (2 x RX580)... your average is less than before?

[christianCoder]

I'm just talking about windows eminer
I notice that some times eminer write devfee on the log but I did not understand how often this is done (I seem to remember after a few hours that I had started it). You can search on your eminer console with CTRL+F.
Also for the profitability there is a problem: every day there are increase of difficulty!
https://www.coinwarz.com/difficulty-charts/ethereum-difficulty-chart

For me anyway the share is much more constant and with Claymore my average hashrate over the last 24 hours on ethermine was 57.4 and now with eminer is 59.2MH/s (2 x RX580)... your average is less than before?

Thanks for the reply and for checking.

Getting 5 to 6 MH/s more than Claymore can also do core underclocks and memory overclocks more agressively on Eminer. However, not as stable as Claymore on Linux.  Longest run w/o crashing was maybe 7 to 10 hours.  Redacting the stability issue.  Looks like it'll be running for 24hrs non-stop in a few hours -- all with aggressive core underclocks and undervolts.  However, IMO, The Eminer dev fee is still a black box.

Also want to encourage the E-miner guy (an AMD Employee perhaps) to keep innovating. I know a lot of work went into this and you have my support. But transparency is crucial.

[aar]

interesting, certainly would be nice to have more competition in the mining software space.

[kuduirt]

  shit miner ) same like clamor )nothng interisting
  imho

[oli123]

I found a link to eminer at http://cryptomining-blog.com/. So I decided to try it out. First I tried the command: eminer -B 0. I tested and the result was 27 Mh/s. So I tried eminer to Pegascoin mining.
eminer -S eu.coin-miners.info:2222 -U wallet -P miner name
4xRX 480 8gb 1077/2200 core/mem no moded bios.
Nice graphic design and useful information during mining. I like Eminer and I will use it for ethash mining.

Here's the screen:

[terrxysq]

any updates to this?

it worked quite well for my amd cards but when it comes to nvidia cards it gets some invalid command error after a few min of mining.
also the speed is slightly less than claymore. 30.3 vs 31

not that really to compare the shares between eminer vs claymores but the effective hash rate from the pool seems to show higher rates for eminer. so a thumbs up for this.

[E-Miner]

any updates to this?

it worked quite well for my amd cards but when it comes to nvidia cards it gets some invalid command error after a few min of mining.
also the speed is slightly less than claymore. 30.3 vs 31

not that really to compare the shares between eminer vs claymores but the effective hash rate from the pool seems to show higher rates for eminer. so a thumbs up for this.

I will announce new release in a few days. Thanks for your report.

[papasmurf1337]

Can you tell us what update will contain?

I am interested in this miner but do it little better for NVIDIA cards, specially for dual mining

[terrxysq]

i think the AMD card code is pretty good after running for a few days. The displayed hashrate is slightly lower than claymore. But the average 24hr rate reported by the pools seems to be slightly more. When using claymore most of the time the average rate is only around 92-95% of the reported rate. When using eminer the average rate are mostly around 95-98% of the reported rate, and occasionally go over the reported rate for a while.


I think the N card code might need some improvement. At least it is not working properly for me.

[E-Miner]

Can you tell us what update will contain?

I am interested in this miner but do it little better for NVIDIA cards, specially for dual mining

Here the some subjects;

- Cloud monitor feature; miner can view and monitor all rigs on a website with statistics and alarms feature and this will be free service forever, if miner pay devfee.
- Reported bugs fixed
- Linux hashrate improved
- DAG intensity feature added
- Devfee coins selectable now.
- Intensity improved.

[terrxysq]

when you releasing an update?

will it be more stable for nvidia devices?

[E-Miner]

when you releasing an update?

will it be more stable for nvidia devices?

Currently, I'm working on nvidia devices for the stabilization.

[terrxysq]

cool. let me know if you need any testers.

[bulgar73]

I try your miner, great work !

Hashrate very close to Claymore.

Mining DBIX, can not connect to server    clona.ru:5081, I set ............ -S stratum+tcp://clona.ru:5081       and received error

stratum=stratum+tcp://clona.ru:5081
CRIT [09-16|23:09:29] Stratum server critical error            error="map[message:Method not found code:-3]"

without prefix "stratum+tcp://" in -S  miner connect to pool but with "etherproxy://....." and do not show woker name on this pool, only show "0"

thnx

----
BTC

[E-Miner]

I try your miner, great work !

Hashrate very close to Claymore.

Mining DBIX, can not connect to server    clona.ru:5081, I set ............ -S stratum+tcp://clona.ru:5081       and received error

stratum=stratum+tcp://clona.ru:5081
CRIT [09-16|23:09:29] Stratum server critical error            error="map[message:Method not found code:-3]"

without prefix "stratum+tcp://" in -S  miner connect to pool but with "etherproxy://....." and do not show woker name on this pool, only show "0"

thnx

----
BTC

I checked, like the pool doesn't support worker name with stratum protocol.

[ranastic]

Any help to using Eminer on ethos?

[bulgar73]

I try your miner, great work !

Hashrate very close to Claymore.

Mining DBIX, can not connect to server    clona.ru:5081, I set ............ -S stratum+tcp://clona.ru:5081       and received error

stratum=stratum+tcp://clona.ru:5081
CRIT [09-16|23:09:29] Stratum server critical error            error="map[message:Method not found code:-3]"

without prefix "stratum+tcp://" in -S  miner connect to pool but with "etherproxy://....." and do not show woker name on this pool, only show "0"

thnx

----
BTC

I checked, like the pool doesn't support worker name with stratum protocol.

Claymore work ......



----
BTC