[ANN] ETHASH Miner - Eminer v0.6.1-RC2 Released (Windows, Linux, MacOS)

[OverEasy]

Yes I did that for all cards except my 390's. They run best at 1100/1500 which is easy in Windows but difficult in Linux.

[1714935167]

1714935167

[1714935167]

1714935167

[1714935167]

1714935167

[fr4nkthetank]

Ah.  so I am blind.  Thanks So Intensity goes to 64...care to elaborate on that ?  Have you had a noticeable increase in hashrate on gpus that are stable with it ?  I report on shares in a day or two, but so far it looks good. Hard to tell if the difference is 1 or 2% in a short time period.

[OverEasy]

I am reporting a LOT of crashing on Linux. Ubuntu 16.4
I have tried many different settings but the AMD cards crash every 30 mins or so.
I wish I had a better understanding of the -kernel switch that no one will explain.
3 of the cards are 390's and I am thinking maybe they don't work well on -kernel 3.
Also the fan speed switch does not seem to change the fan speeds on Linux.

So maybe someone can answer these 2 questions -

1) Explain differences between -k 1,2,3
2)is the -kernel switch able to use commas to set different kernels for different cards? -kernel 2,2,3,3,3 ANSWERED BY ME. YES IT WORKS LIKE EXAMPLE

Thanks for any help

[E-Miner]

I am reporting a LOT of crashing on Linux. Ubuntu 16.4
I have tried many different settings but the AMD cards crash every 30 mins or so.
I wish I had a better understanding of the -kernel switch that no one will explain.
3 of the cards are 390's and I am thinking maybe they don't work well on -kernel 3.
Also the fan speed switch does not seem to change the fan speeds on Linux.

So maybe someone can answer these 2 questions -

1) Explain differences between -k 1,2,3
2)is the -kernel switch able to use commas to set different kernels for different cards? -kernel 2,2,3,3,3 ANSWERED BY ME. YES IT WORKS LIKE EXAMPLE

Thanks for any help

1- Each kernel has different thread count
2- Yes you should set best kernel for your device like your parameter.

I also advice intensity parameter, you should benchmark your device with best intensity like this; eminer -B <deviceid> -intensity <number> also you can choose kernel with this parameters.

If your device crashing probably intensity high for your device.

[kcopcu]

Can i use different pools for failover
Like this -> eminer -S eu1.ethermine.org:4444,eth-eu1.nanopool.org:9999

BTW i like to use your miner , keep working !

Thanks

[E-Miner]

Can i use different pools for failover
Like this -> eminer -S eu1.ethermine.org:4444,eth-eu1.nanopool.org:9999

BTW i like to use your miner , keep working !

Thanks

Yes it's possible, you can use if the pools support same username and password scheme.

[fr4nkthetank]

Ok so I'm seeing about 0.5 to 1% better hashrate reporting pool side.  Would be nice to have a worker automatic restart if a gpu goes down for some reason, and a warning, or automatic intensity drop for that gpu.

[E-Miner]

Ok so I'm seeing about 0.5 to 1% better hashrate reporting pool side.  Would be nice to have a worker automatic restart if a gpu goes down for some reason, and a warning, or automatic intensity drop for that gpu.

I added to checklist, this can be add to cloud service.

[Chocolatte]

great job!

[terrxysq]

request to add feature to notify when significant hash rate drop for a worker(ideally configurable). ie. a worker usually do 180mh/s, if drops by more than X%(configurable) it sends a notification. do not need to notify immediately(configurable). but if below the threshold for more than Y(configurable) minutes then notify.

[E-Miner]

request to add feature to notify when significant hash rate drop for a worker(ideally configurable). ie. a worker usually do 180mh/s, if drops by more than X%(configurable) it sends a notification. do not need to notify immediately(configurable). but if below the threshold for more than Y(configurable) minutes then notify.

added to checklist, will add to cloud service.

[dj--alex]

I check, it works on linux on one overclocked GTX1060 card.

INFO [09-25|11:53:44] GPU device information                   device=0 hashrate="18.108 Mh/s" temperature="63.00 C" fan=49.00%
I have 18.1Mh instead 19.8  

1- how use temperature control? and decrease intensity if t>80 C ?

2-how to manage intensity?

3- Can i control fee if i want to use devfee on 10% on one card, and two card can work without devfee?
(switching DAG,pool and etc take real time!)

4- please add more samples to header of topic
eminer.exe -S eu1.ethermine.org:4444,eu1.ethermine.org:14444 -U YOUR_WALLETID_HERE.rig3 -P x -N rig3 --cloud-key GENERATE_AT_CLOUD.EMINER.NET

for linux
./eminer -S eu2.ethermine.org:4444 -U YOUR_WALLETID_HERE.rig3 -P x -N home
#--cloud-key GENERATE_AT_CLOUD.EMINER.NET

5. On github i cannot found source codes and cannot compile "Dashboard.png"
I thinking no sources , yes?

[laik2]

Power usage is still pretty high. No watchdog, yet...

[E-Miner]

Power usage is still pretty high. No watchdog, yet...

Did you try intensity parameter?

[terrxysq]

any update soon?

[halker2010]

I found an issue with cloud service if i don't use a key or didn't have interest in using it some parameters do not work, like for example -M for device selection.

[LuxLP]

A very good idea, dev! Keep it up!

Are there any tests @ 1060 nvidia?

[E-Miner]

I found an issue with cloud service if i don't use a key or didn't have interest in using it some parameters do not work, like for example -M for device selection.

Could you please send full command line, I can test it.

[E-Miner]

any update soon?

I'm working for new update, I will announce soon.

[halker2010]

I found an issue with cloud service if i don't use a key or didn't have interest in using it some parameters do not work, like for example -M for device selection.

Could you please send full command line, I can test it.

Here

Code:

setx GPU_FORCE_64BIT_PTR 0

setx GPU_MAX_HEAP_SIZE 100

setx GPU_USE_SYNC_OBJECTS 1

setx GPU_MAX_ALLOC_PERCENT 100

setx GPU_SINGLE_ALLOC_PERCENT 100

eminer.exe -S stratum+tcp://europe.ethash-hub.miningpoolhub.com:20535  -U halker.amd -P x -M 0,2,3