chudm
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 07, 2017, 12:14:47 AM |
|
Guys im testing a rig with 6 msi armor 570 8 gb edition, hynix memory, modified the bios, strap 1500 to .... you know the drill, 5 of the 6 cards are working dual mining fine at 30 mh/dcr 750 mh, but 1 card is rogue, the 6th card cant get past 22 mh, no matter what power limit/core/memory i use cant get past 22 mh on eth, any suggestion?
|
|
|
|
willi9974
Legendary
Offline
Activity: 3556
Merit: 2821
Escrow Service
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 07, 2017, 07:18:41 AM |
|
good morning,
i have switched from algo ETH (171MHs) to XMR (4400Hs), that algo needs not so more power at the moment i drop from 800 watt ETH to 570 Watt by using XMR.
The question is, are 4400 Hs for XMR with 6 RX570 4GB cards a good or a bad value?
Best regards Willi
|
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 07, 2017, 10:53:36 AM Last edit: December 08, 2017, 09:49:56 PM by notbatman |
|
I'll post a bios to test out later. 460 H/s is good for an RX460-2GB, I just got a Sapphire RX580-8GB yesterday and I'm currently burning it in with the stock bios, the fan speed sensor seems broken and it gets 430 H/s LOL. It may have to go back... On an unrelated note this card is the heaviest 580 card I got, this thing feels like it weighs several kgs. edit: Modded the bios for this Hynix Sapphire, I got 874 H/s XMR fuck am I disappointed. Bloody thing uses two (2) PCIe power connectors, next card... edit_2: Bit busy, I'll try to post a bios for you later today. edit_3: OK, try this see if it works. -- Asus.RX460.4096.160715_MINING_BIOSYou'll need pixelpatcher to unlock the drivers if your on Windows and I recommend the fan set to 100%, even if the miner says its cool as there's no sensor on most cards memory.
|
|
|
|
tadeus1
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 07, 2017, 08:55:00 PM |
|
willi9974: It is very good rate for XMR. average is somewhere between 700 to 740 per card rx570.
|
|
|
|
chudm
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 08, 2017, 12:04:03 AM |
|
Hi guys, i need some help from you! I got a rig with 6 msi armor 570 8gb hynix memory, on a asus prime z270, i tried to use strapt 1500, and overclock 1230/2150 and everything its ok for 3 mins, then i got a blue screen, i tried to lower the overclock to 1100/1900 but same results, any suggestion? This is my bios, i will try 1 gpu at time mining cause it driving me insane https://mega.nz/#!y8sxEYIT!8cuqTqIaft2OGXxTSmfByKq_fyw6mN-ki-BxJa47w-M
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 08, 2017, 07:43:15 AM |
|
^^^ I've been having stability issues even with the 1500 straps on the 570, I recommend the stock bios it's already got the card pushed to the limit it seems. Underclocking and undervolting are the only way to see any gains and stability together and that can be done at the application level.
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 08, 2017, 07:44:42 AM |
|
480/580-8G or bust for modding, I highly recommend the MSI Armor RX580-8GB Samsung version.
|
|
|
|
willi9974
Legendary
Offline
Activity: 3556
Merit: 2821
Escrow Service
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 08, 2017, 07:51:29 AM |
|
^^^ I've been having stability issues even with the 1500 straps on the 570, I recommend the stock bios it's already got the card pushed to the limit it seems.
Hi, i have all my cards flashed with 1500er Strap and if a card not stable so i take the clock setting only an this card a little back here are my settings ETH - Total Speed: 223.367 Mh/s, Total Shares: 2072, Rejected: 0, Time: 13:37ETH: GPU0 28.648 Mh/s, GPU1 28.581 Mh/s, GPU2 28.556 Mh/s, GPU3 28.579 Mh/s, GPU4 26.709 Mh/s, GPU5 28.632 Mh/s, GPU6 27.354 Mh/s, GPU7 26.308 Mh/s Core / Mem Clock 1100 1100 1100 1100 1100 1100 1100 1100 2100 2100 2100 2100 2100 2100 1900 1950 Powerstage 1 Undervolting 900 Fan Speed 30% Powert at wall with all my 8 cards from type RX Nitro + 570 4GB OC 1050 Watt
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 08, 2017, 08:06:44 AM Last edit: December 08, 2017, 09:55:20 PM by notbatman |
|
^^^ my 570s are MSI, perhaps the Sapphires are bit more robust. Also exactly how clamore's memory frequency settings work is a bit of a mystery he seems to have found a way to access the VRM however my mods are intended to work on just the default settings. In any case I just can't seem to find stability with anything but the stock straps.
|
|
|
|
laik2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 09, 2017, 11:40:48 PM |
|
Elpida can go higher, you just have to push it gently ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) GPU #0: Ellesmere, 8181 MB available, 36 compute units GPU #1: Ellesmere, 4085 MB available, 36 compute units GPU #2: Ellesmere, 4085 MB available, 36 compute units GPU #3: Ellesmere, 4085 MB available, 36 compute units GPU #4: Ellesmere, 4085 MB available, 36 compute units GPU #5: Ellesmere, 8181 MB available, 32 compute units GPU #6: Ellesmere, 4085 MB available, 36 compute units GPU #7: Ellesmere, 4085 MB available, 36 compute units GPU #8: Ellesmere, 4085 MB available, 36 compute units GPU #9: Ellesmere, 4085 MB available, 36 compute units GPU #10: Ellesmere, 4085 MB available, 36 compute units GPU #11: Ellesmere, 4085 MB available, 36 compute units ETH - Total Speed: 362.972 Mh/s, Total Shares: 18934(1582+1616+1572+1513+1656+1609+1531+1650+1640+1652+1568+1553), Rejected: 2(0+0+0+1+0+0+0+0+0+1+0+0), Time: 58:51 ETH: GPU0 30.501 Mh/s, GPU1 30.086 Mh/s, GPU2 30.882 Mh/s, GPU3 29.564 Mh/s, GPU4 30.238 Mh/s, GPU5 30.681 Mh/s, GPU6 30.300 Mh/s, GPU7 30.291 Mh/s, GPU8 30.301 Mh/s, GPU9 30.286 Mh/s, GPU10 30.290 Mh/s, GPU11 29.552 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 362.590 Mh/s
GPU0:01.00.0:Radeon RX 480:113-2E3470U.O5Y:Samsung K4G80325FB GPU1:02.00.0:Radeon RX 480:113-2E3471U.O6A:Samsung K4G41325FE GPU2:03.00.0:Radeon RX 480:113-2E3471U.O6A:Samsung K4G41325FE GPU3:04.00.0:Radeon RX 580:113-1E3660EU-O55:Elpida EDW4032BABG GPU4:05.00.0:Radeon RX 580:113-1E3660EU-O55:Elpida EDW4032BABG GPU5:06.00.0:Radeon RX 570:113-2E366AU-X4Z:Samsung K4G80325FB GPU6:09.00.0:Radeon RX 580:113-4E353CU-O4B:Elpida EDW4032BABG GPU7:0a.00.0:Radeon RX 580:113-4E353CU-O4B:Elpida EDW4032BABG GPU8:0c.00.0:Radeon RX 580:113-4E353CU-O4B:Elpida EDW4032BABG GPU9:0d.00.0:Radeon RX 580:113-4E353CU-O4B:Elpida EDW4032BABG GPU10:0e.00.0:Radeon RX 580:113-4E353CU-O4B:SK Hynix H5GC4H24AJR GPU11:0f.00.0:Radeon RX 580:113-4E353CU-O4B:SK Hynix H5GC4H24AJR
|
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 10, 2017, 04:26:20 PM |
|
|
|
|
|
Miner078
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 10, 2017, 06:50:38 PM |
|
Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 10, 2017, 07:20:40 PM |
|
Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?
I've got one of those cards, It puts out a few HW errors; I just ignore them and carry on. You might get lucky and have a card with higher tolerances than me. My MSI Armor RX570-4GB runs without any HW errors on an almost identical modded BIOS. Here's the BIOS I use. -- MSI-GamingX-RX570-4GB_MINING_BIOS_V3
|
|
|
|
Miner078
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 10, 2017, 07:27:21 PM |
|
Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?
I've got one of those cards, It puts out a few HW errors; I just ignore them and carry on. You might get lucky and have a card with higher tolerances than me. My MSI Armor RX570-4GB runs without any HW errors on an almost identical modded BIOS. Here's the BIOS I use. -- MSI-GamingX-RX570-4GB_MINING_BIOS_V3Thanks man i'll try and let you know! What did you change in the bios?
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 10, 2017, 07:29:46 PM |
|
Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?
I've got one of those cards, It puts out a few HW errors; I just ignore them and carry on. You might get lucky and have a card with higher tolerances than me. My MSI Armor RX570-4GB runs without any HW errors on an almost identical modded BIOS. Here's the BIOS I use. -- MSI-GamingX-RX570-4GB_MINING_BIOS_V3Thanks man i'll try and let you know! What did you change in the bios? Core underclock, memory underclock, VRM undervolt, VRM clock boost, 1500 strap copy.
|
|
|
|
Miner078
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 10, 2017, 07:34:30 PM |
|
Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?
I've got one of those cards, It puts out a few HW errors; I just ignore them and carry on. You might get lucky and have a card with higher tolerances than me. My MSI Armor RX570-4GB runs without any HW errors on an almost identical modded BIOS. Here's the BIOS I use. -- MSI-GamingX-RX570-4GB_MINING_BIOS_V3Thanks man i'll try and let you know! What did you change in the bios? Core underclock, memory underclock, VRM undervolt, VRM clock boost, 1500 strap copy. Sounds good i'll try soon!!
|
|
|
|
baga105
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 10, 2017, 07:50:54 PM |
|
Notbatman, is it possible to do a Custom bios for Rx 570 Sapphire Nitro+ 8gb (Samsung) ?
It is but, there's stability issues with most 570 cards it seems unless you get a lucky card. The straps included with these cards are very close to mining straps already and I've only managed to get minor power savings on these cards over the stock bios. Another user reported success in copying the 1500 straps on his Epilda 570 but I can't confirm this (I need to build a windows gaming and test rig). I came to 29.1 on 130-135W on dual mining.. Can't get over this point.. :7
|
Ass, Gas or Grass! No one rides for free!
|
|
|
Miner078
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 10, 2017, 09:03:32 PM |
|
Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?
I've got one of those cards, It puts out a few HW errors; I just ignore them and carry on. You might get lucky and have a card with higher tolerances than me. My MSI Armor RX570-4GB runs without any HW errors on an almost identical modded BIOS. Here's the BIOS I use. -- MSI-GamingX-RX570-4GB_MINING_BIOS_V3Just to be sure.. this is for Elpida memory right?
|
|
|
|
|