Modified GPU BIOS for Mining

[Miner078]

Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?

I've got one of those cards, It puts out a few HW errors; I just ignore them and carry on. You might get lucky and have a card with higher tolerances than me. My MSI Armor RX570-4GB runs without any HW errors on an almost identical modded BIOS.

Here's the BIOS I use. -- MSI-GamingX-RX570-4GB_MINING_BIOS_V3

Thanks man i'll try and let you know!
What did you change in the bios?

Core underclock, memory underclock, VRM undervolt, VRM clock boost, 1500 strap copy.

Sounds good i'll try soon!!

So i tryed the bios and first i got 28Mh/s but suddently it starts running unstable and i get 0Mh/s

https://imgur.com/a/gAW1R

Can someone help me out please?

[1715249901]

1715249901

[1715249901]

1715249901

[notbatman]

Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?

I've got one of those cards, It puts out a few HW errors; I just ignore them and carry on. You might get lucky and have a card with higher tolerances than me. My MSI Armor RX570-4GB runs without any HW errors on an almost identical modded BIOS.

Here's the BIOS I use. -- MSI-GamingX-RX570-4GB_MINING_BIOS_V3

Thanks man i'll try and let you know!
What did you change in the bios?

Core underclock, memory underclock, VRM undervolt, VRM clock boost, 1500 strap copy.

Sounds good i'll try soon!!

So i tryed the bios and first i got 28Mh/s but suddently it starts running unstable and i get 0Mh/s

https://imgur.com/a/gAW1R

Can someone help me out please?

It looks like you've overridden the bios settings with afterburner, remove anything that might tamper with the settings i.e. afterburner or miner clock/voltage settings.

Also ETH is power intensive and not so profitable relative to other algorithms why are you even trying to mine it with that card? You're not even dual mining?

Finally Claymore's miner is fucking broken, it tries to mine the dev fee on Nicehash and gets fucked up because they're thieves and their servers are done. Use the "-nofee 1" to stop dev fee mining, this will cripple your miner and lower your hashrate.

[Miner078]

Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?

I've got one of those cards, It puts out a few HW errors; I just ignore them and carry on. You might get lucky and have a card with higher tolerances than me. My MSI Armor RX570-4GB runs without any HW errors on an almost identical modded BIOS.

Here's the BIOS I use. -- MSI-GamingX-RX570-4GB_MINING_BIOS_V3

Thanks man i'll try and let you know!
What did you change in the bios?

Core underclock, memory underclock, VRM undervolt, VRM clock boost, 1500 strap copy.

Sounds good i'll try soon!!

So i tryed the bios and first i got 28Mh/s but suddently it starts running unstable and i get 0Mh/s

https://imgur.com/a/gAW1R

Can someone help me out please?

It looks like you've overridden the bios settings with afterburner, remove anything that might tamper with the settings i.e. afterburner or miner clock/voltage settings.

Also ETH is power intensive and not so profitable relative to other algorithms why are you even trying to mine it with that card? You're not even dual mining?

Finally Claymore's miner is fucking broken, it tries to mine the dev fee on Nicehash and gets fucked up because they're thieves and their servers are done. Use the "-nofee 1" to stop dev fee mining, this will cripple your miner and lower your hashrate.

I did nog change anything with afterburner i Just used IT to show what that settings did.

And im not dual mining because that cost even more free and i think ethereum is the next Bitcoin i think the price will be even higher then bitcoin.

Anyway i want to set up the rig first and then put my other cards in to it i have a total of 6 cards.

[Branko]

Could you make a modded bios for a MSI RX570 4G GAMING X Elpida memory?

I've got one of those cards, It puts out a few HW errors; I just ignore them and carry on. You might get lucky and have a card with higher tolerances than me. My MSI Armor RX570-4GB runs without any HW errors on an almost identical modded BIOS.

Here's the BIOS I use. -- MSI-GamingX-RX570-4GB_MINING_BIOS_V3

Thanks man i'll try and let you know!
What did you change in the bios?

Core underclock, memory underclock, VRM undervolt, VRM clock boost, 1500 strap copy.

Sounds good i'll try soon!!

So i tryed the bios and first i got 28Mh/s but suddently it starts running unstable and i get 0Mh/s

https://imgur.com/a/gAW1R

Can someone help me out please?

You need better strap and/or different OC settings

[notbatman]

^^^ His problem is most likely the miner choking on Nicehash when it tries to mine the dev fee.

[Miner078]

^^^ His problem is most likely the miner choking on Nicehash when it tries to mine the dev fee.

So what do you suggest?

[Branko]

^^^ His problem is most likely the miner choking on Nicehash when it tries to mine the dev fee.

Not sure about that, I doubt it would lower memory frequency to 300MHz...or if it would,
its should be for only a minute per hour max...I use claymore 10.2 and didn't notice
any problems in my overall hash rate

[Cereberus]

I am about to build a rig with 6x RX 570 Sapphire Pulse 4 GB and the problem with them mining Zcash when I did the test at the shop was 155 watt per card consuming that is a lot. I surely will switch to Monero as I know that algorithm consume less power and I was thinking with bios mod to have at least 5000 h/s or am I asking too much ?

[pakfun]

recently bought a gigabyte radeon RX580 8GB with samsung memory.


attached with the original bios mod
https://www.dropbox.com/s/18fz6kgem3c8kma/originalrx5808g2bios.rom?dl=0

may i know how to change this type of bios mod? so far only changes for hynix memory.

Your URL is 404.

Try this. -- Gigabyte.RX580.8192.Samsung_MINING_BIOS

hi sir, i click the link but cant download any rom file. any idea? pls guide me. thanks

[baga105]

I am about to build a rig with 6x RX 570 Sapphire Pulse 4 GB and the problem with them mining Zcash when I did the test at the shop was 155 watt per card consuming that is a lot. I surely will switch to Monero as I know that algorithm consume less power and I was thinking with bios mod to have at least 5000 h/s or am I asking too much ?

It is impossible to have 155W per card.. Or do you have all at stock settings? I tested them vs Dual eth mining, and the power consumption on ZEC was lower than on Dual.

U should get arround 4800-5000 on monero.

[Miner078]

@baga105 You asked for my skype but i cant send a PM today anymore my skype is Dylan Hubers from The Netherlands
email: dhubers.nl@gmail.com  ( https://join.skype.com/invite/po7ir8ewscWF )

Hope to hear you soon!

[Miner078]

Okay so i flashed bios but something weird happens: after flashing im only able to do a forced reboot and also i cant open the windows start menu.. Did someone also had this problem and how did you solve it?

[YourMom420]

thats not a gpu bios problem. try flashing back to see

[Miner078]

thats not a gpu bios problem. try flashing back to see

I did but still the same problem

[OverEasy]

MOD Request
Please try to mod this bios for me.

XFX RX580 Samsung/Hynix 8GB

https://www.techpowerup.com/vgabios/191383/xfx-rx580-8192-170323

When I use GPU-Z it shows the Hynix mem but when I open it with PBE the Samsung RAM is shown by default in the VRAM section.
These cards are a little confusing with their little switch and dual bios
Thanks

[notbatman]

MOD Request
Please try to mod this bios for me.

XFX RX580 Samsung/Hynix 8GB

https://www.techpowerup.com/vgabios/191383/xfx-rx580-8192-170323

When I use GPU-Z it shows the Hynix mem but when I open it with PBE the Samsung RAM is shown by default in the VRAM section.
These cards are a little confusing with their little switch and dual bios
Thanks

Sure I'll post one in a bit, a lot of people say XFX cards are the fastest, I guess we'll see....

I've a also got my msi gamingx 570 - 4gb stable with the performance straps 770 h/s XMR rock solid. I'll post that too in a bit.

Finally I got my msi armor 570 - 4gb going at over 800 h/s XMR stable. Bios for that too in a bit.



Edit: I'll also see about a mega account to make downloads less complex.

[bigjee]

Hi there.
I have the following cards in my rig that are currently hashing at 24-25Mh/s on Claymore 10.2. Windows 10.

3 x RX 570 Saphire Pulse 4GB (elpida memory)
https://www.dropbox.com/s/c56be5ir5v6z0ch/Ellesmere_Saph_RX_570_4GB_Elipda_original1.rom?dl=0
https://www.dropbox.com/s/zz6359e7slmbam7/Ellesmere_Saph_RX_570_4GB_Elipda_original2.rom?dl=0
https://www.dropbox.com/s/0pg7mwvfd73irym/Ellesmere_Saph_RX_570_4GB_Elipda_original3.rom?dl=0

1 x RX 580 Gigabyte Gaming 8GB (samsung memory)
https://www.dropbox.com/s/77gef145os88x7r/Ellesmere_Gigabyte_RX_580_8GB_Samsung_original.rom?dl=0

1 x RX 480 Powercolor 4GB (samsung memory)
https://www.dropbox.com/s/3ah7bw6a454chb5/Ellesmere_Powercolor_RX_480_4GB_Samsung_original.rom?dl=0


1 x RX 480 MSI Armor 8GB (samsung memory)
https://www.dropbox.com/s/1jyrff5iu8t2qw0/Ellesmere_MSI_RX_480_8GB_Samsung_original.rom?dl=0

They are all on stock bios.
My goal is to get each card hashing at least 30 Mh/s.

Kindly help me reach that goal.

[Asgaroth]

Hi,

This is a mod request for the PowerColor Red Devil RX-580 Golden Sample 8GB with Hynix memory. The original BIOS is available for download here.

Any assistance would be greatly appreciated.

[rehe]

Hi there.
I have the following cards in my rig that are currently hashing at 24-25Mh/s on Claymore 10.2. Windows 10.

3 x RX 570 Saphire Pulse 4GB (elpida memory)
https://www.dropbox.com/s/c56be5ir5v6z0ch/Ellesmere_Saph_RX_570_4GB_Elipda_original1.rom?dl=0
https://www.dropbox.com/s/zz6359e7slmbam7/Ellesmere_Saph_RX_570_4GB_Elipda_original2.rom?dl=0
https://www.dropbox.com/s/0pg7mwvfd73irym/Ellesmere_Saph_RX_570_4GB_Elipda_original3.rom?dl=0

1 x RX 580 Gigabyte Gaming 8GB (samsung memory)
https://www.dropbox.com/s/77gef145os88x7r/Ellesmere_Gigabyte_RX_580_8GB_Samsung_original.rom?dl=0

1 x RX 480 Powercolor 4GB (samsung memory)
https://www.dropbox.com/s/3ah7bw6a454chb5/Ellesmere_Powercolor_RX_480_4GB_Samsung_original.rom?dl=0


1 x RX 480 MSI Armor 8GB (samsung memory)
https://www.dropbox.com/s/1jyrff5iu8t2qw0/Ellesmere_MSI_RX_480_8GB_Samsung_original.rom?dl=0

They are all on stock bios.
My goal is to get each card hashing at least 30 Mh/s.

Kindly help me reach that goal.

I think, there is no way to reach 30 Mh/s safely. Do not harm your cards with crazy experiments.

[notbatman]

Hi,

This is a mod request for the PowerColor Red Devil RX-580 Golden Sample 8GB with Hynix memory. The original BIOS is available for download here.

Any assistance would be greatly appreciated.

I'll add it to the queue.