Mattthev
|
|
January 16, 2018, 03:44:54 PM |
|
Why such price difference between models? There is always standard version priced at 5 USD... and some models have Pro version with higher price. I've also tweaked PBE with my timings and with basic auto overclocking and undervolting https://mining-bios.eu/product-category/pbe-2-0/
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
January 16, 2018, 07:09:46 PM Last edit: January 17, 2018, 07:48:27 AM by notbatman |
|
OK I figured out the trick to modding the 480 to a 580 (thx hellm), at least enough to make the new drivers work; offset D6 needs to be changed from C6 to E6.
If anybody has 480 to 580 mod requests I'm confident with doing that now. Before this I modded a compatible 580 BIOS, that was kinda dicey and I needed the card in hand.
|
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
January 16, 2018, 08:37:10 PM Last edit: January 17, 2018, 03:20:47 AM by Assaro |
|
@notbatman
Have a question.
your latest posted bios are made for what driver version? The last adrenaline?
Trying your bios for the Saphire pulse 570 4BG ITX and the card is not getting full speed on core (1244 Mhz) Even if is set it up in msi Afterburner or in the bat file always the same the voltage is floating up and down together with the core clock.... This behavior is with 6 cards...
Any advice would be appreciated...
Thanks in advanced
|
|
|
|
Golempl
Newbie
Offline
Activity: 42
Merit: 0
|
|
January 16, 2018, 09:06:25 PM |
|
@notbatman
Have a question.
your latest posted bios are made for what driver version? The last adrenaline?
Trying your bios for the Saphire pulse 570 4BG ITX and the card is not getting full speed on core (1244 Mhz) Even if is set it up in msi Afterburner or in the bat file always the same the voltage is floating up and down together with the core clock.... This behavior is with 6 cards...
Any advice would be appreciated...
Thanks in advanced
My cards also seems to act strange in windows. Using phoenixminer I managed to get them stable at 29.7MH/s with this config: [Profile_0] Name=ELPIDA GPU_P0=300;750;0 GPU_P1=588;765;0 GPU_P2=952;900;0 GPU_P3=1041;975;0 GPU_P4=1106;1031;0 GPU_P5=1100;1093;0 GPU_P6=1130;1143;0 GPU_P7=1160;870 Mem_P0=300;750;0 Mem_P1=1000;800;0 Mem_P2=2000;890 Fan_Min=3000 Fan_Max=3200 Fan_Target=20 Fan_Acoustic=1244 Power_Temp=69 Power_Target=0 Lowering gpu voltage seems sometimes make card unstable and make gpu frequency to float, reducing performance to like 26MH/s. Linux (checked on simplemining) performance seems 1MH/s lower than windows. 7x gpu rig draws 1040wat , its like 145w per card. My other rx 580 runs at 30.5MH/s and using 130wat. Using blockchain driver under windows 10
|
|
|
|
skymia
Jr. Member
Offline
Activity: 140
Merit: 5
|
|
January 16, 2018, 09:54:14 PM |
|
|
Discordapp.com/invite/fQcYvkh ❤ Do Good Things-Make Life Better ❤ Masternodes 650% ROI ❤ TeleMedicine ❤ Folding@Home ❤ MEDIC coin
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
January 17, 2018, 03:21:01 AM |
|
@notbatman
Have a question.
your latest posted bios are made for what driver version? The last adrenaline?
Trying your bios for the Saphire pulse 570 4BG ITX and the card is not getting full speed on core (1244 Mhz) Even if is set it up in msi Afterburner or in the bat file always the same the voltage is floating up and down together with the core clock.... This behavior is with 6 cards...
Any advice would be appreciated...
Thanks in advanced
Edit:
After a fresh install of win 10 the problem is gone with the unstable hashrate, tested 5 hours with 26.7-27.4 Mhs on ETH and ca.500 Mhs on Sia coin... BUt anyway it is not hitting the 1244Mhz bios settled just arround the 1140-1170 Mhz of processor clock.... If there is any trick to get it to 1244, please let me know. But great work, thanks again.....
|
|
|
|
galaxyxxz
Newbie
Offline
Activity: 99
Merit: 0
|
|
January 17, 2018, 04:06:52 AM |
|
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
January 17, 2018, 07:45:39 AM |
|
@notbatman
Have a question.
your latest posted bios are made for what driver version? The last adrenaline?
Trying your bios for the Saphire pulse 570 4BG ITX and the card is not getting full speed on core (1244 Mhz) Even if is set it up in msi Afterburner or in the bat file always the same the voltage is floating up and down together with the core clock.... This behavior is with 6 cards...
Any advice would be appreciated...
Thanks in advanced
Edit:
After a fresh install of win 10 the problem is gone with the unstable hashrate, tested 5 hours with 26.7-27.4 Mhs on ETH and ca.500 Mhs on Sia coin... BUt anyway it is not hitting the 1244Mhz bios settled just arround the 1140-1170 Mhz of processor clock.... If there is any trick to get it to 1244, please let me know. But great work, thanks again..... You need 580s if you want to push the card harder.
|
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
January 17, 2018, 08:43:37 AM |
|
@notbatman
Have a question.
your latest posted bios are made for what driver version? The last adrenaline?
Trying your bios for the Saphire pulse 570 4BG ITX and the card is not getting full speed on core (1244 Mhz) Even if is set it up in msi Afterburner or in the bat file always the same the voltage is floating up and down together with the core clock.... This behavior is with 6 cards...
Any advice would be appreciated...
Thanks in advanced
Edit:
After a fresh install of win 10 the problem is gone with the unstable hashrate, tested 5 hours with 26.7-27.4 Mhs on ETH and ca.500 Mhs on Sia coin... BUt anyway it is not hitting the 1244Mhz bios settled just arround the 1140-1170 Mhz of processor clock.... If there is any trick to get it to 1244, please let me know. But great work, thanks again..... You need 580s if you want to push the card harder. Hi, thanks for the information. Im glad with it how its working, it was just "if" there is anything im missing... Thank you again for your good work!
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
January 17, 2018, 06:41:26 PM |
|
@notbatman
Have a question.
your latest posted bios are made for what driver version? The last adrenaline?
Trying your bios for the Saphire pulse 570 4BG ITX and the card is not getting full speed on core (1244 Mhz) Even if is set it up in msi Afterburner or in the bat file always the same the voltage is floating up and down together with the core clock.... This behavior is with 6 cards...
Any advice would be appreciated...
Thanks in advanced
My cards also seems to act strange in windows. Using phoenixminer I managed to get them stable at 29.7MH/s with this config: [Profile_0] Name=ELPIDA GPU_P0=300;750;0 GPU_P1=588;765;0 GPU_P2=952;900;0 GPU_P3=1041;975;0 GPU_P4=1106;1031;0 GPU_P5=1100;1093;0 GPU_P6=1130;1143;0 GPU_P7=1160;870 Mem_P0=300;750;0 Mem_P1=1000;800;0 Mem_P2=2000;890 Fan_Min=3000 Fan_Max=3200 Fan_Target=20 Fan_Acoustic=1244 Power_Temp=69 Power_Target=0 Lowering gpu voltage seems sometimes make card unstable and make gpu frequency to float, reducing performance to like 26MH/s. Linux (checked on simplemining) performance seems 1MH/s lower than windows. 7x gpu rig draws 1040wat , its like 145w per card. My other rx 580 runs at 30.5MH/s and using 130wat. Using blockchain driver under windows 10 Post your stock bios, I'll give you a bios to try that will work with the miners default settings.
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
January 17, 2018, 06:46:05 PM Last edit: January 17, 2018, 07:03:10 PM by notbatman |
|
|
|
|
|
pubix
Member
Offline
Activity: 154
Merit: 10
|
|
January 17, 2018, 09:18:03 PM |
|
Do you by any chance own a XFX RX480 GTR 8gb Samsung?
|
|
|
|
Mattthev
|
|
January 17, 2018, 09:48:56 PM |
|
@notbatman
Have a question.
your latest posted bios are made for what driver version? The last adrenaline?
Trying your bios for the Saphire pulse 570 4BG ITX and the card is not getting full speed on core (1244 Mhz) Even if is set it up in msi Afterburner or in the bat file always the same the voltage is floating up and down together with the core clock.... This behavior is with 6 cards...
Any advice would be appreciated...
Thanks in advanced
Edit:
After a fresh install of win 10 the problem is gone with the unstable hashrate, tested 5 hours with 26.7-27.4 Mhs on ETH and ca.500 Mhs on Sia coin... BUt anyway it is not hitting the 1244Mhz bios settled just arround the 1140-1170 Mhz of processor clock.... If there is any trick to get it to 1244, please let me know. But great work, thanks again..... You need 580s if you want to push the card harder. Hi, thanks for the information. Im glad with it how its working, it was just "if" there is anything im missing... Thank you again for your good work! No you don't need that... you just need better timings. It uses Nerdralph timing for the Hynix memory and some strange Elpida timing... with better timings it can do 29-30MH/s for Elpida, the 24AJ Hynix timing is little bit tricky but 28MH/s should be there, I don't have good timing for this type but someone wrote me that he has 30MH/s with this type.
|
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
January 18, 2018, 04:51:39 AM |
|
@notbatman
Have a question.
your latest posted bios are made for what driver version? The last adrenaline?
Trying your bios for the Saphire pulse 570 4BG ITX and the card is not getting full speed on core (1244 Mhz) Even if is set it up in msi Afterburner or in the bat file always the same the voltage is floating up and down together with the core clock.... This behavior is with 6 cards...
Any advice would be appreciated...
Thanks in advanced
Edit:
After a fresh install of win 10 the problem is gone with the unstable hashrate, tested 5 hours with 26.7-27.4 Mhs on ETH and ca.500 Mhs on Sia coin... BUt anyway it is not hitting the 1244Mhz bios settled just arround the 1140-1170 Mhz of processor clock.... If there is any trick to get it to 1244, please let me know. But great work, thanks again..... You need 580s if you want to push the card harder. Hi, thanks for the information. Im glad with it how its working, it was just "if" there is anything im missing... Thank you again for your good work! No you don't need that... you just need better timings. It uses Nerdralph timing for the Hynix memory and some strange Elpida timing... with better timings it can do 29-30MH/s for Elpida, the 24AJ Hynix timing is little bit tricky but 28MH/s should be there, I don't have good timing for this type but someone wrote me that he has 30MH/s with this type. well have read also ppl claiming to have 29 mhs but im not an expert (just a common user) and tried them all but without success.... if someone wants i can share the links for it....
|
|
|
|
skymia
Jr. Member
Offline
Activity: 140
Merit: 5
|
|
January 18, 2018, 03:31:24 PM |
|
New coin with great potentials, coming very soon to the exchange! Do your own research, study your own investment! Good luck, https://bitcointalk.org/index.php?topic=2753447.0
|
Discordapp.com/invite/fQcYvkh ❤ Do Good Things-Make Life Better ❤ Masternodes 650% ROI ❤ TeleMedicine ❤ Folding@Home ❤ MEDIC coin
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
January 18, 2018, 05:12:05 PM Last edit: January 18, 2018, 06:06:28 PM by notbatman |
|
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
January 19, 2018, 01:26:59 PM |
|
Just a reminder to anybody using my bios' to set the fan to 100% unless of course you have a scroll cage fan. The temp sensor will not tell you if the memory is overheating!
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
January 20, 2018, 08:51:07 PM Last edit: January 21, 2018, 01:49:49 PM by notbatman |
|
There are no RX cards left. Anybody know how to mod a gforce?? Looks like I've got my choice of 1030, 1050, 1060, 1070 or 1080. Anybody?
|
|
|
|
coinbasedgod
Newbie
Offline
Activity: 11
Merit: 0
|
|
January 22, 2018, 04:53:56 AM |
|
There are no RX cards left. Anybody know how to mod a gforce?? Looks like I've got my choice of 1030, 1050, 1060, 1070 or 1080. Anybody? https://i.imgur.com/RKN0mF2.jpgDo I Have the last ones? Lol This is my first mining rig build with AMD cards and im not having fun If anyone could help it would be most appreciated im only getting between 10-12MH/s and thats after doing everything i could figure out.. Stock was running 9MH/s this is my build Windows 10 6x ASUS-DUAL-RX580-04G (Elpida) (Radeon RX 580 Series) Intel Celeron Processor 2.80GHz MSI Z270A Mobo Crucial 4GB RAM Drevo 64GB SSD Corsair Platinum 1000w PSU MSI after burner is greyed out, so Ive maxed out all the settings I could in the ASUS GPU tweak and aso the AMD wattman settings. I installed the newest AMD drivers and also tried with the Crimson/Mining drivers they have available. Am I missing something simple? Most people i see getting over 20MH/s stock so im not sure whats wrong. Im not sure how to change the bios on the GPUs if thats actually needed.. Ive set up 6x 1070 ti Rigs and have never done that and they were so easy to get 30+MH/s out of them.. Any help would be appreciated id be willing to pay someone to guide me through what i need to do
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
January 22, 2018, 10:59:04 AM |
|
^^^ nvidia encrypted the bios to lock users out of their hardware.
|
|
|
|
|