SMOS Linux Plug-In & Mine - The simplest mining OS based on Linux

[micairvas]

Hi Guys, I really need help to configure my mining rig 4 x ASUS R9270-DC2OC-2GD5 on SMOS-BAMT.
Currently I using smos V1,3, but I also tried with v1.1 and v.1.2

Rig working between 30 min and 1,5 hour, and after that mining stops. I tried more than 20 configs, I changed memory, motherboard,cpu, powersupply, but nothing changes.

I also tried to dig with 3 type of bios : Default bios, 1,1 V (undervolted), 1,163V (undervolted).
Tried to dig with only 2 cards and also mining stops after about 1 hour.

Does anybody using ASUS R9270-DC2OC-2GD5 (non X) cards on SMOS-BAMT?
If do, please give me gpu bios and proper config.

I tried diffrent configs (more than 20):
1500/1450 / TC16000/gpu1/int 18-19 / shaders 1280
1000/1250 / TC15508/gpu1/int 18-19 / shaders 1280
1080/1400 / TC15232/gpu1/int 18-19 / shaders 1280 ......

I can't make my rig working fine more then 10 days, please help guys biggrin.gif.

[SirGeekalot]

Hi Guys, I really need help to configure my mining rig 4 x ASUS R9270-DC2OC-2GD5 on SMOS-BAMT.
Currently I using smos V1,3, but I also tried with v1.1 and v.1.2

Rig working between 30 min and 1,5 hour, and after that mining stops. I tried more than 20 configs, I changed memory, motherboard,cpu, powersupply, but nothing changes.

I also tried to dig with 3 type of bios : Default bios, 1,1 V (undervolted), 1,163V (undervolted).
Tried to dig with only 2 cards and also mining stops after about 1 hour.

Does anybody using ASUS R9270-DC2OC-2GD5 (non X) cards on SMOS-BAMT?
If do, please give me gpu bios and proper config.

I tried diffrent configs (more than 20):
1500/1450 / TC16000/gpu1/int 18-19 / shaders 1280
1000/1250 / TC15508/gpu1/int 18-19 / shaders 1280
1080/1400 / TC15232/gpu1/int 18-19 / shaders 1280 ......

I can't make my rig working fine more then 10 days, please help guys biggrin.gif.

try switching to SGMiner and use the following. ive had very good results so far. i'm using a 1.v undervolt bios too.

Code:

"xintensity" : "4",
"gpu-threads" : "2",
"worksize" : "256",
"gpu-engine" : "1055",
"gpu-fan" : "0-100",
"gpu-memclock" : "1250",
"thread-concurrency" : "5121",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "80",
"temp-target" : "75",
"api-listen" : true,
"api-allow": "W:192.168.0.0/24",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "30",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"log-dateformat" : "0",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "10",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel" : "zuikkis",
"monitor" : "cat >> /home/cgminer.log",
"kernel-path" : "/opt/miners/sgminer/kernel"

[micairvas]

Are you using Asus R9 270 (non X)? This is important, because smos bamt working normal with R9 270X cards.
Also I first time see this kind of config.
TC 5121, Intensitiy 4? what mean X before intensity, is this some mistake or SGminer using different config file?
How much khash you getting with this config?

"xintensity" : "4",
"gpu-threads" : "2",
"worksize" : "256",
"gpu-engine" : "1055",
"gpu-fan" : "0-100",
"gpu-memclock" : "1250",
"thread-concurrency" : "5121",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "80",
"temp-target" : "75",
"api-listen" : true,
"api-allow": "W:192.168.0.0/24",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "30",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"log-dateformat" : "0",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "10",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel" : "zuikkis",
"monitor" : "cat >> /home/cgminer.log",
"kernel-path" : "/opt/miners/sgminer/kernel"

[SirGeekalot]

yeah i've got an Asus R9 270

currrently running at 460KH/s and very stable.

SGMiner has a few added options. one of them being xintensity. have a read here. http://www.overclock.net/t/1461916/tutorial-ultimate-guide-to-tweaking-amd-cgminer-3-7-2-kalroth-edition-sgminer-instructions-included-aswell-get-the-most-hash-out-of-your-gpu

basically it allows you to fine tune the threads being run more precisely.

so we are running 2 threads per card and an xIntensity of 4 with 5121 base threads per cards.

the low TC i due to the fact that we have 2 threads per card. i've fiddled with these settings quite a bit and this is the sweetest setup i could get to run stable o my ASUS cards. you might get different results with a different Card.

[micairvas]

Ok, thx a lot. I will try this config tonight.
I hope it will work with my cards on 1,1V. I bought cards 10 days ago, maybe is some new revision with new bios or something....

Also how is temperatures and fan speed on that setting?

[SirGeekalot]

i've got my cards in a case in my loft so its a bit warmer than an open air case.

temp target is set to 75 and i've never seen it go above that. fans at 70%

Again, your results may vary if your cards aren't in a case.

[paulcipher]

Anyone who knows SMOS well..

I have three rigs running SMOS how do I set up to consolidate monitoring? Meaning I want to go to one IP address to view the statuses for all rigs. I know this is possible in BAMT but I'm not real sure how it actually works.

Thanks!

[dc17]

Anyone who knows SMOS well..

I have three rigs running SMOS how do I set up to consolidate monitoring? Meaning I want to go to one IP address to view the statuses for all rigs. I know this is possible in BAMT but I'm not real sure how it actually works.

Thanks!

check Mining Tips #2 on smos-linux.org/tips/ it's called mgpumon

[Demontager]

Why i can't configure wifi in SMOS ? Yes, i can connect to wifi, but password doesn't save it and every time i need reenter after boot.  If i manually editing wifi settings Apply button greyed out so i can't save settings.
Also i tried manually configure wifi in /etc/network/interfaces, but all changes made to this file after reboot vanished.

[paulcipher]

Anyone who knows SMOS well..

I have three rigs running SMOS how do I set up to consolidate monitoring? Meaning I want to go to one IP address to view the statuses for all rigs. I know this is possible in BAMT but I'm not real sure how it actually works.

Thanks!

check Mining Tips #2 on smos-linux.org/tips/ it's called mgpumon

So is do_direct_status: the IP address of the machine you are currently on OR is it the machine that you want to send the status to? Meaning the machine that will consolidate and report the data via the web page??

Thanks boss

[dc17]

Anyone who knows SMOS well..

I have three rigs running SMOS how do I set up to consolidate monitoring? Meaning I want to go to one IP address to view the statuses for all rigs. I know this is possible in BAMT but I'm not real sure how it actually works.

Thanks!

check Mining Tips #2 on smos-linux.org/tips/ it's called mgpumon

So is do_direct_status: the IP address of the machine you are currently on OR is it the machine that you want to send the status to? Meaning the machine that will consolidate and report the data via the web page??

Thanks boss

I think it's the machine you're currently on (the machine you're changing the config file on). But when it won't work, just try the opposite (meaning do_direct_status = the ip of the "main" server under which you'll check the stats for the whole farm).

[micairvas]

"xintensity" : "4",
"gpu-threads" : "2",
"worksize" : "256",
"gpu-engine" : "1055",
"gpu-fan" : "0-100",
"gpu-memclock" : "1250",
"thread-concurrency" : "5121",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "80",
"temp-target" : "75",
"api-listen" : true,
"api-allow": "W:192.168.0.0/24",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "30",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"log-dateformat" : "0",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "10",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel" : "zuikkis",
"monitor" : "cat >> /home/cgminer.log",
"kernel-path" : "/opt/miners/sgminer/kernel"

Unfortunately this config dont work on my rig. I installed sgminer, but mining stops after 5 minutes....
If somebody using different config on smos for asus R9 270 (non X) please let me know. Thx

[SirGeekalot]

what's happening when you run with this config? (its my config, so just wondering how we could tweak it to help you)

[micairvas]

When I try to use your config, mu mining stop (computer blocked)after 5 min and I needed to restart rig. 
Also I put 1,163V bios, I tested every card with extender on unigine heaven 4 benchmark about 1-2 hour, and cards passing all test. Also tried every card (one by one) to mine on gui miner for 1 hour and everything was good (1050/1400, TC 15508).
Dont know what to do anymore ...

[SirGeekalot]

are you running windows as well as SMOS or are you trying to get this running in SMOS?

if you open htop or top when the computer locks is it Xserver thats using >95%  cpu?

mine did that when i messed with the memory clock.

[micairvas]

No, I am trying to set mining on Bamt-Smos 1.3, I just tested each card on guiminer  (windows) for about 1 hour.
I need to check this, but I think that usage on every card is 99%.
I tried memory clock from 1000-1600, got same problems....

[phaddie]

Hey guys,

  I just tried to make a build of the cgminer for Ultracoin (scrypt-jane)  When I do

./configure --enable-scrypt --enable-opencl

I get this error

Configuration Options Summary:

  curses.TUI...........: FOUND: -lncurses
  OpenCL...............: NOT FOUND. GPU mining support DISABLED
configure: error: No mining configured in

Everything is there (sdk, patch) I am not sure what to do next.

Thoughts?

Phad

[phaddie]

Hey guys,

  I have been using vertminer for Scrypt-N coins in SMOS no problem.  The only thing is I have to be at the computer I cannot run it though ssh.  Can someone help me make it so that vertminer starts the same was as cgminer in SMOS?  I know it is done with the screen command but I cannot figure it out.

  The way cgminer runs, it opens in a background screen that I can access via ssh.  When I just run vertminer from a window it is tied to that window only.

 Thank you in advance

   Phad

[dimb]

someone use sgminer on smos? I don't understand how i can mine with "mine start" with sgminer. I used these lines to change cgminer 3.7 to sgminer:
wget http://www.smos-linux.org/upgrade/sgminer.sh
chmod +x sgminer.sh
./sgminer.sh

but it's obvious now my config file is not /etc/bamt/cgminer.conf as usual. anybody know where is config file to use sgminer?:°.

[phaddie]

someone use sgminer on smos? I don't understand how i can mine with "mine start" with sgminer. I used these lines to change cgminer 3.7 to sgminer:
wget http://www.smos-linux.org/upgrade/sgminer.sh
chmod +x sgminer.sh
./sgminer.sh

but it's obvious now my config file is not /etc/bamt/cgminer.conf as usual. anybody know where is config file to use sgminer?:°.

If you followed the steps online than yes it is the same conf file and it should be integrated to start with mine start.  The online scrypt actually replaces cgminer with sgminer.