Hiveon. №1 OS for mining

[HaloGenius]

wow thats a great update, thank you devs.
looking forward for 2.0 release

I'm think at least one minor update before release 2.0 you will seen yet

[ippikiokami]

In one of my two rigs the hashrate of my cards is wildly fluctuating from 8 -> 30. Anyone have this issue and know how to to fix it?

RX580 and Asus z270-a. I've already tried reinstalling and tweaking here and there.

[HaloGenius]

In one of my two rigs the hashrate of my cards is wildly fluctuating from 8 -> 30. Anyone have this issue and know how to to fix it?

RX580 and Asus z270-a. I've already tried reinstalling and tweaking here and there.

Common problem wrong BIOS settings. Check and set Gen2 for x16 and x1 PCIE slots

[HaloGenius]

Autofans, config misspelling ...  post with version announce and Telegram channel announce was already edited

Correct settings of autofans config file (which you can create at /hive-config/autofan.conf) are:

Code:

# Target GPU temperature
TARGET_TEMP=
# Minimal fan speed
MIN_FAN=30
# Stop mining at critical temp
CRITICAL_TEMP=85
# Set to 1 to disable AMD fan control
NO_AMD=0

remove "DEF_" prefix if you created config file. This variables internal only used by script and reserved for future releases.

[HaloGenius]

ASIC 0.1-05
- PROJECT_HASH support in config file


Windows client 0.1-01 Beta

Believe it or not but Hive now has a client for Windows. This is a BETA release


Download setup file here:
http://download.hiveos.farm/win/

Git Repository. Please report bugs here:
https://github.com/minershive/hiveos-win

[cryptodunno]

one more question - will it be possible to install older drivers in hiveos 2.0?
the latest nvidia drivers are not very got (hopefully yet) for mining

[HaloGenius]

one more question - will it be possible to install older drivers in hiveos 2.0?
the latest nvidia drivers are not very got (hopefully yet) for mining

Yes it's possible.
read how-to on your rig /hive-drivers-pack/README.txt

BTW
HiveOS 2.0 is not released yet )

[Maxhodl]

I am new to HiveOS and Mining , I heard lot of positive feedback so i want to install HiveOS instead of windows 10.

I tried to research instructions , most of them talk about installing it on USB drive, however i have windows installed on SSD , and i want to replace it with Hive OS or dual boot it ideally.  If someone can point me in right direction , it will help.

Secondly , when i created a rig in dashboard, It gives me bunch of wallet options on web UI , what are these wallets - are these the wallet address of coins i will be mining ? How do i select which coin , as no option to select coin name , just the algorithm.

In general HiveOS is so diffrent from windows, and i was unable to browse easily , couldnt even find  a notepad , nor could start mining as a sample even.   I searched youtube for step by step guide, but did not find .

I know these all are silly questions , but if anyone would be able to help  me, it wl be great.

[gameboy366]

Is Vega supported now ? Last time I tried to mine, got bunch of errors.

[FFI2013]

ASIC 0.1-05
- PROJECT_HASH support in config file


Windows client 0.1-01 Beta

Believe it or not but Hive now has a client for Windows. This is a BETA release


Download setup file here:
http://download.hiveos.farm/win/

Git Repository. Please report bugs here:
https://github.com/minershive/hiveos-win

Wow slamming out the updates will I finally be able to run my r9 cards in windows but all the great features hiveos has to offer

[ippikiokami]

Hello guys, I have 2 machines with HiveOS (after the last windows update debacle I made the jump). I have two machines

• 6 RX570 on a H81 BTC 2.0
• 6 RX580 on a Asus Z270-a

For some reason the 6 RX580 machine cards are all fluctuating from anywhere between 8 and 30~ MH/s. I've tried

• Reinstalling HiveOS
• Running 4 cards to see if it's something to do with the number of cards
• Switching Bios numbers to Gen 2, 3, Auto (all caused the machine to crash in under 5 minutes)

But have the same issues.  Strange thing is everything worked fine under windows. I only switched over due to the annoying last spring update and not wanting to deal with that again. Even stranger is I have a second mining machine with 6 cards but a H81 BTC 2.0 that is having no issues at all.

[Maxhodl]

I m running 6 1080ti with ccminer , everything works fine except , the GPUs are showing 130-140W power each.   the total power usage around 800W (for 6 GPUs)

I tried overclocking power to 200 , no change...  

Any ideas why the GPUs are not taking full power ?

[HaloGenius]

I m running 6 1080ti with ccminer , everything works fine except , the GPUs are showing 130-140W power each.   the total power usage around 800W (for 6 GPUs)

I tried overclocking power to 200 , no change...  

Any ideas why the GPUs are not taking full power ?

Power Limit - it's not power usage from outlett. It's LIMIT to power usage. real power usage depends from algo power efficiency and may be lower than power limit
Which algo are you using ?

[Maxhodl]

I m using Lyra2z to mine gincoin . If it uses only130-140 per gpu then it makes sense.   I m getting around 18-19 MH/s total... Around 3.2 per gpu, does that sound normal with a little bit overclocking

[FFI2013]

I tried the latest windows release on a rig with r9 cards and it won't load the xmr-stak wallet configuration on made on my account it loads the default with CPU mining only which also it doesn't send any stats to the hiveos dashboard

[HaloGenius]

I m using Lyra2z to mine gincoin . If it uses only130-140 per gpu then it makes sense.   I m getting around 18-19 MH/s total... Around 3.2 per gpu, does that sound normal with a little bit overclocking

Lyra2z - it's energy efficient algo like cryptonight, so your power consumption it's almost real

[HaloGenius]

HiveOS Linux v0.5-60
- ewbf 0.2 fork with equihash 144/5, 192/7
- autofans reworked and improved, still only manual config in /hive-config/autofan.conf

[adiman73]

Please help me with settings for AMD RX580 GPU for Lyra2z to mine gincoin.
I tried but the miner does not report hashrate in the pool
https://i.imgur.com/PxzeEGr.png

[alizali]

hi all hive users
i have this command in my wallet config
-tt 55
-ttli 62
-fanmin 55
-fanmax 75

but i still have cards with this info in panel
59°   49%

why  hive does not control the temp?

miner is claymore


p.s: there is no fan control in AMD setting neither in tuning

[clems]

Hello guys, I have 2 machines with HiveOS (after the last windows update debacle I made the jump). I have two machines

• 6 RX570 on a H81 BTC 2.0
• 6 RX580 on a Asus Z270-a

For some reason the 6 RX580 machine cards are all fluctuating from anywhere between 8 and 30~ MH/s. I've tried

• Reinstalling HiveOS
• Running 4 cards to see if it's something to do with the number of cards
• Switching Bios numbers to Gen 2, 3, Auto (all caused the machine to crash in under 5 minutes)

But have the same issues.  Strange thing is everything worked fine under windows. I only switched over due to the annoying last spring update and not wanting to deal with that again. Even stranger is I have a second mining machine with 6 cards but a H81 BTC 2.0 that is having no issues at all.

Can be OC or Bios Mod configuration issue.
You can PM me if you want i can check Bios and OC configuration.