Hiveon. №1 OS for mining

[HaloGenius]

Do you guys have any idea how to control my "corsair PSU hx1200i platinum"?
This PSU fan isn't automatically spinning and now it's hot how can monitor and control this PSU on hiveOS?

I can remotely adjust the fan speed of this PSU on windows OS but I can't do anything on HiveOS.

Basically, software for Corsair PSUs made for Windows.
I saw tool for Corsair PSUs somewhere on GitHub for Linux but I'm not sure that it allow set anything (I guess it can/allow only readings but I can wrong).

[dimafern]

0.6-197@210205 🐧

What's new?

SYSTEM 🖥
⚙️ Fixed freezing logs in miner command (mostly was noticeable on a remote console if monitor or monitor emulator attached)

MINERS👷‍♂️
⛏ XMRig v6.8.1 (fixed AMD GPUs health data readings; added support for flexible huge page sizes)
⛏ TeamRedMiner v0.8.1 (added general support for RX 6000 series "Big Navi", currently supported only A-mode; ETH+ZIL mining: new pool strategy 'min_epoch' added for switching between plain ETH and ETH+ZIL pools)
⛏ lolMiner v1.22 (significantly improved the performance of zombie mode on RX 400/500 GPUs)
⛏ SRBMiner-Multi v0.6.5 (huge performance increase on 'autolykos2' algorithm on GPU's, up to ~600%; huge performance increase on 'autolykos2' algorithm on CPU's with AVX2, up to ~500%; added abort mechanism for 'autolykos2' dataset creation on CPU)
⛏ NanoMiner v3.2.0 (added autolykos algorithm support for Ergo coin, it's available for 3GB on both AMD and Nvidia GPUs, devfee is 5%)


0.6-196@210201 🐧

SYSTEM 🖥
⚙️ Improved filesystem mounting/unmounting (fixes and improvements in agent, sreboot)
⚙️ Improved support for hardware watchdogs (added support for yet another HL340 Chinese watchdog: Finedar; improved compatibility with Open-Dev watchdogs; stop pinging watchdog after 10 consecutive errors)
⚙️ Improved e1000e package (improved Intel e1000e Ethernet driver stability)
⚙️ Added experimental execution motd watch on boot (if monitor connected&detected)
⚙️ Minor fix in hive-replace (fixed closing session on start on some cases)
⚙️ Minor updates and fixes for some system tools (nvtool v1.3.6; amdmeminfo v2.1.6; upp v0.0.9; fixes for nvstop, cache-hive-ip, gpu-detect)

MINERS👷‍♂️
⛏ SRBMiner-Multi v0.6.4 (added algorithm 'autolykos2' Ergo coin for CPU/GPU mining, fee 1.25%; performance increase on 'phi5' algorithm on CPU's with AVX2; removed devfee for 'cryptonight_heavyx' algorithm; bug fixes)
⛏  XMRigCC v2.8.5 (as fork for XMRig for CPU; added parameter "max-cpu-usage": 100 to throttle cpu usage without reducing the cores/threads; fixed hashrate printout when hashrate is > 99999.9h/s)
⚙️ Minor fixes for some miners packages (Gminer: fixed multiple pool hosts; XPMclient: fixed showing hashrate from hanged GPU)

[HaloGenius]

I can upgrade and run miner...

Seems it need to read as "can't"

Try

Code:

apt install --reinstall hive-miners-phoenixminer-5.5c

[dimafern]

0.6-198@210210 🐧

What's new?

SYSTEM 🖥
⚙️ Improved software watchdog (add new option delay)

MINERS👷‍♂️
⛏ SRBMiner-Multi v0.6.6 (performance increase on 'autolykos2' algorithm on GPU's; reduced power consumption on 'autolykos2' algorithm on GPU's; fixed miner crashing when creating dataset on 'autolykos2' algorithm)
⛏ lolMiner v1.23 (reduced the amount of needed host memory when running many cards in zombie mode; slightly improved zombie mode performance on future epochs above 387)
⛏ T-Rex v0.19.10 (added GPU PCI address to summary handler; fixed bug on ethash: "GPU is idle" error when generating DAG)

[dimafern]

0.6-199@210216 🐧

What's new?

SYSTEM 🖥
⚙️ Fixed motd (reduced resources usage in motd watch mode; if connection to API servers failed don't start watch mode)
⚙️ Fixed hive-replace (download option fix)
⚙️ Fixed gpu-stats (Nvidia GPU stats was not shown if last GPU produced errors)

MINERS👷‍♂️
⛏ XMRig v6.8.2 (optimized CryptoNight-Heavy for Zen3, 7-8% speedup)
⛏ SRBMiner-Multi v0.6.7 (performance increase on 'autolykos2' algorithm on GPU's, devfee increased from 1.25% to 2.00%; added 1 or 2 buffer mode for build DAG on ethash, see manual for option --gpu-ethash-mode; minor bug fixes)
⛏ lolMiner v1.24a (fixed a bug, that often caused the amdgpu driver to report a VM_CONTEXT1_PROTECTION_FAULT_STATUS on startup; fixed defect shares and wrong reported has hrate when started with fixed --zombie-tune parameters directly; added (tunable) zombie mode kernels for R9 290(x) and R9 295 GPUs; fixed a bug with Baffin RX 460/550/560 and Tonga R9 380 GPUs showing too high hashrate and producing invalids in 1.23 zombie mode; fixed a bug with ETC mining not starting up when more then two 4G GPUs in 1.23)
⛏ T-Rex v0.19.11 (security fix: bind API servers to 127.0.0.1 by default to prevent unauthorised access to the API)
⛏ NanoMiner v3.2.2 (fixed Autolykos for AMD Big Navi RX 6xxx; improved autolykos performance for AMD, 1-5% depending on GPU)
⛏🆕 NSFMiner v1.3.4  (detected potential NVIDIA memory allocation failure, mostly on Windows desktop. Notes from Hive: It's a fork of Ethminer and you can find it under Ethminer configuration as `nsfminer` fork. According to our tests, this miner is no better than the latest build of `ethminer` in terms of hashrate or power consumption, and also doesn't contain special optimizations for AMD Vega cards and newer)
⛏ SGMiner-fancyIX v0.7.3 (added Navi support for neoscrypt_navi, neoscrypt-xaya_navi, ethash_navi, lyra2Z_navi, allium_navi, phi2_navi)
⛏ CPUminer-Opt-JayDDee v3.15.6 (implemented keccak pre-hash optimization for x16-like algos, added test for share reject reason when solo mining)

[gathermind]

When using Rx470s as my Rig, can I control all Rx470 LED off in the Hive OS?

[HaloGenius]

When using Rx470s as my Rig, can I control all Rx470 LED off in the Hive OS?

It's can be done by one of action but all not in Hive:
- by black/blue insulating tape
- by removing LEDs power plug from PCB
- (on some models) present switch to turn off LEDs

[gathermind]

When using Rx470s as my Rig, can I control all Rx470 LED off in the Hive OS?

It's can be done by one of action but all not in Hive:
- by black/blue insulating tape
- by removing LEDs power plug from PCB
- (on some models) present switch to turn off LEDs

Thank you!  We are in a same boat!

[tudi443]

hello,im new in this topic,and i curently use N**has*,and ppl say hiveos give more reward to miner than NH?my friend use 6 rx 570 4gb got almost double the reward than mine 3 1070s,and one 1060 6gb with also he can achieve that with lower power consumption than mine,he say HiveOS only optimized with radeon graphic cards,is that true? if the reward 50% more than i get in NH,i definetly will join HiveOS too,thank you for answering

[dimafern]

0.6-200@210302 🐧

What's new?

MINERS👷‍♂️
⛏ CPUminer-Opt-Rplant v5.0.14 (added 'gr' Ghostrider algo for RTM/Raptoreum coin; bug fixes)
⚙️ VerthashMiner fixes (fixed miner uptime)


0.6-200@210301 🐧

What's new?

SYSTEM 🖥
⚙️ Fixed AMD OC errors on when applied on "Big Navi"
⚙️ Improved stability hive-replace on some 3rd party hardware (added watchdog-octofan to exclude list)
⚙️ Improved nvidia-driver-update (added new option --repo for custom repository; prefer Hive servers for download by default; skip 32bit libs installation; internal optimizations)
⚙️ Fixed memory usage by autofan

MINERS👷‍♂️
⛏ VerthashMiner v0.7.0 (fixed a crash when receiving the first stratum job; miner will now instantly switch stratum jobs on mining.notify; removed PCIe bus ID configuration file format due to being not reliable; a full PCIe ID (bus:device:function) will now be displayed in the device list; added a new feature "Adaptive batch size", WorkSize = 0 and it's now used as default, instead of hardcoded 131072 WorkSize; added 2 new options "BatchTimeMs" and "OccupancyPct" to control "Adaptive batch size", see manual for details; added support for AMD GPU monitoring through SysFS API backend; added support for NVIDIA GPU monitoring through NVML backend; added new option GPUTemperatureLimit when GPU Monitoring is available; automatically transfer NVIDIA SM3.0 devices to the OpenCL backend if the miner was compiled with CUDA 11 or later; added extra config validation layers for device settings inside the configuration file and command line;
misc fixes and code refactoring.)
⛏ NSFMiner v1.3.7 ethminer fork (used board name rather than architecture for AMD; fixed skipping of 1st pool when connecting with multiple pools specified; fixed appearance of 'ghost' GPU metrics on epoch change)
⛏ XMRigCC v2.9.0 XMRig for CPU fork (rebased latest RX and CN improvements from XMRig 6.8.2; fixed 1GB HugePages)
⛏ XMRig v6.9.0 (fixed crash when GPU mining cn-heavy on Zen3 system)
⛏ GMiner v2.45 (improved performance on Ethash for Nvidia and AMD GPUs; improved performance on KAWPOW for Nvidia GPUs; decreased stale shares rate on Nvidia GPUs for Ethash and KAWPOW algorithms; removed kernel #3 and added 2 energy efficiency kernels (#5 and #6) on Ethash for Nvidia GPUs; improved kernel auto-tuning, auto-tuning takes into account energy efficiency of kernels; optimized NVML polls to decrease memory leaks caused by recent Nvidia drivers, to exclude memory leaks completely use --pec 0 option)
⛏ miniZ v1.73x3 latest stable (added support for ethash – ETH/ETC (beta), fee 0.75%; improved stale shares for all algos; added support with 1% fee for RVN, ZELS, SERO, ZANO, VEIL, VBK; fixed 192,7 mining; minor improvements for 210,9 and 96,5; removed support for 150,5,3; improved overall stability)
⛏ miniz v1.73x4 beta (improved --quit-disconnect option)
⛏ SRBMiner v0.6.8 (added algorithm 'rx2' for LUX/LuxCoin for CPU mining, 8GB Ram needed, fee 1.25%; performance increase on 'autolykos2' algorithm on Vega GPU's ~6-9% and ~3-5% on other; added abort mechanism for 'autolykos2' dataset creation on GPU)

[dimafern]

0.6-201@210306 🐧

What's new?

SYSTEM 🖥
⚙️ Minor selfupgrade improvements (added option -c | --consolefont to change default text console font to more suitable version with correct pseudographics; added exit codes output for each apt command in case of errors during update process)
⚙️ Minor agent improvement (skip miner stats if no miner is running)
⚙️ Updated hive-replace (due End-Of-Life of Vega Images removed Vega image options)
⚙️ Updated AMD GPUs tools (amdmemtweak v0.1.9.4-hiveos, amdmeminfo to v2.1.7 - added detection Navi22 "Navy Flounder")

MINERS👷‍♂️
⛏ GMiner v2.46 (added memory tweaks for Nvidia GPUs with GDDR5X and GDDR5 memory by using new option --mt with value from 1 to 6; improved --api parameter, now you can bind ip address; added option to control watchdog restart delay by new option --watchdog_restart_delay; optimized memory usage while generating DAG which will able to run miner on 13 GPUs+ rigs with 4GB memory and without swap; improved kernel auto-tuning)
⛏ SRBMiner-Multi v0.6.9 (added algorithm 'verthash' for CPU & GPU mining, fee 1.25%; performance increased ~1-6% on 'autolykos2' algorithm on GPU's; performance increased ~25% on 'autolykos2' algorithm on CPU's with AVX2; reduced power consumption on 'autolykos2' algorithm on Vega GPU's; small improvements on 'rx2' algorithm; minor bug fixes)
⛏ Ethminer-NSFMiner v1.3.8 (lower compiler optimizations to safer level; effective hash rate (option -v4) calculations working for stratum2; use single DAG instead of split DAG on AMD drivers that allow greater than 4GB allocation; handle f2pool out-of-spec. messages)
⛏ XMRig-XMRigCC v2.91 (added CRYPTO cn variant "superfast" algo 'cn/superfast')

[dimafern]

0.6-201@210307 🐧

What's new?

MINERS👷‍♂️
⛏ CPUminer-Opt-Rplant v5.0.15 (fixed memory leak on 'gr' algo)
⛏ VerthashMiner  v0.7.1 (changed "difficulty to target" formula to a more reliable one; miner will no longer load NVML and ADL libraries when they are not needed; OpenCL back-end will now report error codes along with messages; added GPU memory errors tracker: invalid shares will be discarded)
⛏ XMRig v6.10.0 (fixed many new job messages when solo mining; fixed crash in cn-heavy on Zen3 with manual thread count; fixed possible out of order write to log file)

[dimafern]

0.6-201@210309 🐧

What's new?

MINERS👷‍♂️
⛏ NanoMiner v3.3.0 (added mining mode ZIL/Zilliqa in dual for coins ETH,ETC,CFX,ERG; reduced dev fee on Ergo: 5% -> 2.5%; fixed memClocks and coreClocks on NVidia; removed support PASC/Pascal Coin)
⛏ GMiner v2.47 (fixed startup crash on some rigs; fixed bug with ignoring api parameter; improved stability)
⛏ XLARig v5.2.2 (synced code with XMRig v6.8.1; full RandomX integration for Panthera)
⛏ CPUminer-Opt-JayDDee v3.15.7 (added accepted/stale/rejected percentage to summary log report; added warning if share counters mismatch which could corrupt stats; CPU temperature reporting is more responsive to rising temperature; a few AVX2 & AVX512 tweaks; removed some dead code and other cleanup)
⚙️ Fixed start CPUminer-Opt-Rplant v5.0.11+ on AMD Ryzen CPUs

[dimafern]

0.6-201@210316
⛏ NanoMiner v3.3.2 (performance improvements for 'autolykos' ~40% for AMD Vega family: Vega 56/64/VII)

0.6-201@210315
⛏ T-Rex v0.19.12 (add ethproxy (getwork) mode; bug fixes: "No connection error"; API security vulnerability that allows creating / modifying PC files when API is bound to 0.0.0.0 in read-only mode - Hive users were not affected by this vulnerability)

0.6-201@210314
⛏ NanoMiner v3.3.1 (added dual Raven + Zilliqa; fixed an issue with 2Miners pool)
⛏ SRBMiner-Multi v0.7.0 (reduced power consumption on 'autolykos2' algorithm for Ellesmere GPU's ~2-3%; reduced power consumption on 'verthash' algorithm for Ellesmere GPU's ~5% and Vega ~10%; performance increase on 'verthash' algorithm for Vega GPU's ~3% and CPU ~7%; added parameter '--verthash-dat-path'; fixed 'verthash' algorithm stack smash issue; fixed watchdog not triggering on dead GPU issue; fixed crash on 'panthera' algorithm; removed parameters : --gpu-watchdog-disable-mode, --watchdog-rounds; fixed bugs)
⛏ VerthashMiner v0.7.2 (fixed nonce range calculation)
⚙️ Fixed some miner packages (xmrig-new v6.10.0; cpuminer-opt-jayddee v3.15.7)

[dimafern]

0.6-201@210323 🐧

What's new?

MINERS👷‍♂️
⛏ NBMiner v37.0 (added support mining Ergo coin on Nvidia GPUs; removed support bfc, cuckarood for Nvidia; removed support octopus for AMD; fixed octopus support CFX new address format; fixed 'clBuildProgram error' issue on Vega for v35.0..v36.1; disabled AMD iGPU by default; minor bug fix, improve overall stability)
⛏ TeamRedMiner v0.8.1.1 (added support RX 6700 XT)
⛏ SRBMiner-Multi v0.7.1 (added algorithm 'heavyhash' for CPU mining oBTC coin, fee 0.85%; added algorithm 'yespowermgpc' for CPU mining MGPC/MagPieCoin, fee 0.85%; small improvements on 'autolykos2' algorithm; fixed crash on 'panthera' algorithm on non-Ryzen CPUs; minor bug fixes)
⛏ Ethminer-NSFminer v1.3.9 (small fixes)
⛏ CPUminer-Opt-rplant v5.0.17 (added 'heavyhash' algo)
⛏ CPUminer-Opt-JayDDee v3.16.0 (added 'verthash' algo)
⛏ SGminer-fancyIX v0.7.4 (added Navi kernel for groestlcoin)

[dimafern]

0.6-201@210325 🐧

What's new?

MINERS
⛏ NBMiner v37.1 (fixed Ergo high reject ratio on 10 series Nvidia GPUs; fixed Ergo pool compatibility)
⛏ Ethminer-NSFminer v1.3.10 (fixed missed connection delay when --retry-max is 0; added --seq option to sequentially load DAG one GPU at a time; minor bug fixes)
⛏ CPUminer-Opt-JayDDee v3.16.1 (small verthash performance improvement; added new options for verthash algo: data-file and verify; fixed detection of corrupt stats caused by networking issues)

[dimafern]

0.6-201@210327 🐧

What's new?

MINERS👷‍♂️
⛏ GMiner v2.49 (improved DAG generation, now miner generates valid DAG in extremal OC modes with new option --safe_dag:  1 - fast mode, default for GTX GPUs, miner generates DAG as quickly as possible, DAG errors are possible at maximum OC and 2 - safe mode, default for RTX GPUs, miner generates DAG with error control, useful for RTX cards at maximum OC; improved memory tweaks: fixed problem with possibly broken DAG on epoch change)
⛏ Ethminer-NSFminer v1.3.11 (added timestamp to console log; added --cl-split option to force split DAG mode for AMD GPUs it's may improve performance on older GPUs; display GPU memory temperature if available; fixed simulation and benchmark for low epochs)
⛏ CPUminer-Opt-rplant v5.0.19 (fixed memory leak on 'gr' algo; bug fixes)

[dimafern]

BECOME A TOP ASIC MINER: from newbie to PRO! 💪😎



All about ASIC mining chat: https://t.me/joinchat/PSFnisSovXhiNjky

✔️ How to start mining on ASICs?
✔️ What ASICs to pay attention to in 2021?
✔️ How to overclock an ASIC and earn more?
✔️ How to save on electricity?
✔️ What coins are worth mining on ASICs?

All these + tutorials, tips, life hacks on ASIC mining, and much more are discussed in the new chat for ASIC miners ⛏
📍 interviews with the owners of mining farms
📍 weekly polls, surveys, discussions
📍 news, new hardware, and software, firmware
📍 tech support and much more

#1 ASIC mining community 🤟🔝

Join 😎:
🇺🇸 https://t.me/joinchat/PSFnisSovXhiNjky EN
🇷🇺 https://t.me/joinchat/PjUJdjkZlEgxMzNi RU

[dimafern]

0.6-202@210331 🐧

What's new?

SYSTEM 🖥
⚙️ Improved agent (introduced new command tweakers for testers; fixed VRAM size in VBIOS filenames)
⚙️ Improved support for 3rd-party hardware (added support for new Octofan controller)
⚙️ Updated Nvidia tools (Nvidia Flasher v5.692: adds RTX 3060 support, nvtool v1.4.0: added fixed core clocks option for Turing and Ampere)
⚙️ Updated AMD tools (amdmeminfo v2.1.8: fixed detection RX 6700XT 🥕; amdmemtweak v0.1.9.6-hiveos: fixed behavior on GDDR6 equipped GPUs on bulk operations; fixed error message on AMD OC on Big Navi)
⚙️ Updated kernel module k10temp (added support for Zen3 arch - temperature display for Ryzen 5xxx series CPUs)
⚙️ Updated net-test command (uses all API hosts for test)
⚙️ Fixed selfupgrade command (in some cases miner was started in maintenance mode; removed common pciids update)
⚙️ Fixed gpu-fans-find command (start miner only if it was running)
⚙️ Fixed hello command (fixed formatting)
⚙️ Fixes for PXE images (added GUI support, added display in the drive name that it's PXE client and the IP address of the PXE server)

MINERS👷‍♂️
⛏ T-Rex v0.19.14 (minor performance improvements on octopus for 16 series GPUs; for ethash and etchash added option validate-shares to enable share validation and display share difficulty; bug fixes: memory tweaks have no effect on some 1060 cards, invalid stats if power usage reporting is not supported)
⛏ EthMiner-NSFMiner v1.3.12 (added option -F to load parameters from a file instead of on command line)
⚙️ Fixed config generation for TeamRedMiner SSL pools templates
⚙️ Fixed miner stats processing for RHminer (fixed miner hang when switching to fee)

🥕 AMD RX 6700 XT support will be added with new Image which will be announced later

[dimafern]

New Stable Branch Image release v0.6-202@210401 💿

🔑 Key features:
* Universal boot mode: BIOS | UEFI
* Hive Linux client: v0.6-202@210331
* Ubuntu v18.04 LTS based
* Linux kernel: v5.4.108
* Nvidia drivers: v460.67
* AMD OpenCL v20.40 with v5.9.0325 driver supporting the latest GPUs including RX 6700XT/ 6800/ 6800XT/6900XT

This Image is recommended for Nvidia Pascal/Turing/Ampere and AMD Polaris/Vega/Navi/Big Navi

💾 Download
Available for download as a torrent or xz archive in the "GPU" section: https://download.hiveos.farm/latest/ and flashed with Rufus/balenaEtcher
or it can be live replaced with the hive-replace tool via shell

Code:

hive-replace -y --stable