dvbb
Newbie
 Offline
Activity: 21
Merit: 0
|
 |
January 31, 2018, 11:58:04 AM
Last edit: January 31, 2018, 01:29:47 PM by dvbb |
|
Hello I'm trying to do solo mining with ~ 10 Computers. How can I check total mining summary? Because each of miners show some values but is it somewhere info like : Total mining hash 3KH and current number of workers or similar.
It's not possible to see a mining summary , the wallet is only getting block submissions , it doesn't know anything about how fast the hodlminer clients are. hodlminer does show speed per client, so you would need to manually aggregate them to know the total speed. Example look for the line that says the work was accepted, [2018-01-31 11:27:31] accepted: 1/1 (100.00%), 72.98 hash/s (yay!!!) Thank you for information. I reviewed my clients, but nowhere there are line "accepted". There are only lines like this: [2018-01-31 15:26:45] thread 0: 977 hashes, 91.94 hash/s [2018-01-31 15:26:55] thread 0: 1044 hashes, 98.59 hash/s [2018-01-31 15:26:58] LONGPOLL pushed new work [2018-01-31 15:27:03] LONGPOLL pushed new work [2018-01-31 15:27:03] thread 0: 415 hashes, 58.81 hash/s [2018-01-31 15:27:13] thread 0: 986 hashes, 93.22 hash/s It this OK ? Do you think this way of mining should be more profitable for me, than pool mining ? |
|
|
|
|
|
|
|
|
|
|
|
|
|
Even if you use Bitcoin through Tor, the way transactions are handled by the network makes anonymity difficult to achieve. Do not expect your transactions to be anonymous unless you really know what you're doing.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
ghobson
Full Member
Offline
Activity: 250
Merit: 100
Crypto Developer
|
|
January 31, 2018, 01:24:13 PM |
|
Hello I'm trying to do solo mining with ~ 10 Computers. How can I check total mining summary? Because each of miners show some values but is it somewhere info like : Total mining hash 3KH and current number of workers or similar.
It's not possible to see a mining summary , the wallet is only getting block submissions , it doesn't know anything about how fast the hodlminer clients are. hodlminer does show speed per client, so you would need to manually aggregate them to know the total speed. Example look for the line that says the work was accepted, [2018-01-31 11:27:31] accepted: 1/1 (100.00%), 72.98 hash/s (yay!!!) Thank you for information. Do you think this way of mining should be more profitable for me, than pool mining ? That's up to you to decide after an evaluation period, I personally prefer solo mining. |
Join the boid community, earn crypto while doing real research with your cpu/gpu boid.com |
|
|
dvbb
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 31, 2018, 01:41:11 PM |
|
I reviewed my clients, but nowhere there are line "accepted". There are only lines like this:
[2018-01-31 15:26:45] thread 0: 977 hashes, 91.94 hash/s
[2018-01-31 15:26:55] thread 0: 1044 hashes, 98.59 hash/s
[2018-01-31 15:26:58] LONGPOLL pushed new work
[2018-01-31 15:27:03] LONGPOLL pushed new work
[2018-01-31 15:27:03] thread 0: 415 hashes, 58.81 hash/s
[2018-01-31 15:27:13] thread 0: 986 hashes, 93.22 hash/s
It this OK ?
Is there some way to get in general more info about my mining, something like, understand when find block or something useful. Because right how, on every 1-2h I'm receiving ~ 20ROI in my wallet but did't get any info for this.
|
|
|
|
|
JJJay
Newbie
Offline
Activity: 7
Merit: 0
|
|
January 31, 2018, 02:44:44 PM
Last edit: January 31, 2018, 02:54:58 PM by JJJay |
|
Since the fork I have been getting a lot of these errors, and have not successfully mined any blocks. I did the repair and am in sync with the block explorer.
2018-01-31 14:36:06 socket recv error An existing connection was forcibly closed by the remote host. (10054)
2018-01-31 10:47:38 ERROR: AcceptToMemoryPool: free transaction rejected by rate limiter
Is this normal? Any advice?
Also, on opening of the application and starting mining I get the following:
2018-01-31 14:49:16 CDBEnv::Open: LogDir=C:\Users\Michael\Desktop\ROI\database ErrorFile=C:\Users\Michael\Desktop\ROI\db.log
2018-01-31 14:51:45 ERROR: Read: Failed to open file C:\Users\Michael\Desktop\ROI\banlist.dat
|
|
|
|
|
|
DisasterFaster (OP)
|
|
January 31, 2018, 03:15:14 PM |
|
Since the fork I have been getting a lot of these errors, and have not successfully mined any blocks. I did the repair and am in sync with the block explorer.
2018-01-31 14:36:06 socket recv error An existing connection was forcibly closed by the remote host. (10054)
2018-01-31 10:47:38 ERROR: AcceptToMemoryPool: free transaction rejected by rate limiter
Is this normal? Any advice?
Also, on opening of the application and starting mining I get the following:
2018-01-31 14:49:16 CDBEnv::Open: LogDir=C:\Users\Michael\Desktop\ROI\database ErrorFile=C:\Users\Michael\Desktop\ROI\db.log
2018-01-31 14:51:45 ERROR: Read: Failed to open file C:\Users\Michael\Desktop\ROI\banlist.dat
Could you please submit this as an issue over at GitHub so the dev team can look into this for you  https://github.com/ROIcoin/ROIcoin/issues |
|
|
|
|
Gilligan
Newbie
Offline
Activity: 11
Merit: 0
|
|
January 31, 2018, 05:21:14 PM |
|
Sorry dude its been a long time since I have used the nicehash service my self. There will do doubt be bids on YouTube.
I don't think it's possible yet. I watched some videos, and I sent a support ticket to NH. It looks like you need a username, password, and worker to link the pool. I don't think our pools have that - at least, I can't see a place to log in to set that info up on our pools. |
|
|
|
|
TheRaster
Member
Offline
Activity: 391
Merit: 14
|
|
January 31, 2018, 06:17:28 PM |
|
Sorry dude its been a long time since I have used the nicehash service my self. There will do doubt be bids on YouTube.
I don't think it's possible yet. I watched some videos, and I sent a support ticket to NH. It looks like you need a username, password, and worker to link the pool. I don't think our pools have that - at least, I can't see a place to log in to set that info up on our pools. username would be your wallet key and password x |
|
|
|
ghobson
Full Member
Offline
Activity: 250
Merit: 100
Crypto Developer
|
|
January 31, 2018, 06:35:29 PM |
|
I reviewed my clients, but nowhere there are line "accepted". There are only lines like this:
[2018-01-31 15:26:45] thread 0: 977 hashes, 91.94 hash/s
[2018-01-31 15:26:55] thread 0: 1044 hashes, 98.59 hash/s
[2018-01-31 15:26:58] LONGPOLL pushed new work
[2018-01-31 15:27:03] LONGPOLL pushed new work
[2018-01-31 15:27:03] thread 0: 415 hashes, 58.81 hash/s
[2018-01-31 15:27:13] thread 0: 986 hashes, 93.22 hash/s
It this OK ?
Is there some way to get in general more info about my mining, something like, understand when find block or something useful. Because right how, on every 1-2h I'm receiving ~ 20ROI in my wallet but did't get any info for this.
which pool are you mining to ? they each have their own tracking info on their website. On your side you can add -D for debug and -P for protocol information. |
Join the boid community, earn crypto while doing real research with your cpu/gpu boid.com |
|
|
Gilligan
Newbie
Offline
Activity: 11
Merit: 0
|
|
January 31, 2018, 06:37:17 PM |
|
Sorry dude its been a long time since I have used the nicehash service my self. There will do doubt be bids on YouTube.
I don't think it's possible yet. I watched some videos, and I sent a support ticket to NH. It looks like you need a username, password, and worker to link the pool. I don't think our pools have that - at least, I can't see a place to log in to set that info up on our pools. username would be your wallet key and password x Thanks Raster! I'll try that later today. |
|
|
|
|
dvbb
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 31, 2018, 07:28:33 PM |
|
I reviewed my clients, but nowhere there are line "accepted". There are only lines like this:
[2018-01-31 15:26:45] thread 0: 977 hashes, 91.94 hash/s
[2018-01-31 15:26:55] thread 0: 1044 hashes, 98.59 hash/s
[2018-01-31 15:26:58] LONGPOLL pushed new work
[2018-01-31 15:27:03] LONGPOLL pushed new work
[2018-01-31 15:27:03] thread 0: 415 hashes, 58.81 hash/s
[2018-01-31 15:27:13] thread 0: 986 hashes, 93.22 hash/s
It this OK ?
Is there some way to get in general more info about my mining, something like, understand when find block or something useful. Because right how, on every 1-2h I'm receiving ~ 20ROI in my wallet but did't get any info for this.
which pool are you mining to ? they each have their own tracking info on their website. On your side you can add -D for debug and -P for protocol information. I'm doing solo mining. I have started Wallet at Computer with IP 192.168.0.100 and 10 other computers which mining with follow options -a hodl --url=http://192.168.0.100:23110 -u mine -p miner --coinbase-addr=mywallletaddress... The strange point for me is that I cannot find out from which mining comes from the coins in my Wallet. As I mentioned I'm receiving ~20ROI on each 1-2h More than 30 hours these 10 machines was in mining to coinspool.cu.cc , Today I decide to switch to my solo mining as I show above. |
|
|
|
|
|
DisasterFaster (OP)
|
|
January 31, 2018, 07:49:17 PM |
|
I reviewed my clients, but nowhere there are line "accepted". There are only lines like this:
[2018-01-31 15:26:45] thread 0: 977 hashes, 91.94 hash/s
[2018-01-31 15:26:55] thread 0: 1044 hashes, 98.59 hash/s
[2018-01-31 15:26:58] LONGPOLL pushed new work
[2018-01-31 15:27:03] LONGPOLL pushed new work
[2018-01-31 15:27:03] thread 0: 415 hashes, 58.81 hash/s
[2018-01-31 15:27:13] thread 0: 986 hashes, 93.22 hash/s
It this OK ?
Is there some way to get in general more info about my mining, something like, understand when find block or something useful. Because right how, on every 1-2h I'm receiving ~ 20ROI in my wallet but did't get any info for this.
which pool are you mining to ? they each have their own tracking info on their website. On your side you can add -D for debug and -P for protocol information. I'm doing solo mining. I have started Wallet at Computer with IP 192.168.0.100 and 10 other computers which mining with follow options -a hodl --url=http://192.168.0.100:23110 -u mine -p miner --coinbase-addr=mywallletaddress... The strange point for me is that I cannot find out from which mining comes from the coins in my Wallet. As I mentioned I'm receiving ~20ROI on each 1-2h More than 30 hours these 10 machines was in mining to coinspool.cu.cc , Today I decide to switch to my solo mining as I show above. If you want more exact tracking please create a receiving address with label like MINER 1. Then on miner 1 put that address in the conf file. Create receiving address like MINER 2 and then on miner 2 use that address. If you have 1 receive address on 10 miners it will be very hard to track that. |
|
|
|
|
|
Sergiose
|
|
January 31, 2018, 07:52:29 PM |
|
If the developers get everything they want to realize, then this will turn out to be a very cool project. I wish success to the project team.
|
|
|
|
|
dvbb
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 31, 2018, 08:19:39 PM |
|
I reviewed my clients, but nowhere there are line "accepted". There are only lines like this:
[2018-01-31 15:26:45] thread 0: 977 hashes, 91.94 hash/s
[2018-01-31 15:26:55] thread 0: 1044 hashes, 98.59 hash/s
[2018-01-31 15:26:58] LONGPOLL pushed new work
[2018-01-31 15:27:03] LONGPOLL pushed new work
[2018-01-31 15:27:03] thread 0: 415 hashes, 58.81 hash/s
[2018-01-31 15:27:13] thread 0: 986 hashes, 93.22 hash/s
It this OK ?
Is there some way to get in general more info about my mining, something like, understand when find block or something useful. Because right how, on every 1-2h I'm receiving ~ 20ROI in my wallet but did't get any info for this.
which pool are you mining to ? they each have their own tracking info on their website. On your side you can add -D for debug and -P for protocol information. I'm doing solo mining. I have started Wallet at Computer with IP 192.168.0.100 and 10 other computers which mining with follow options -a hodl --url=http://192.168.0.100:23110 -u mine -p miner --coinbase-addr=mywallletaddress... The strange point for me is that I cannot find out from which mining comes from the coins in my Wallet. As I mentioned I'm receiving ~20ROI on each 1-2h More than 30 hours these 10 machines was in mining to coinspool.cu.cc , Today I decide to switch to my solo mining as I show above. If you want more exact tracking please create a receiving address with label like MINER 1. Then on miner 1 put that address in the conf file. Create receiving address like MINER 2 and then on miner 2 use that address. If you have 1 receive address on 10 miners it will be very hard to track that. OK I'll try this with different addresses, but currently is there some way to find out from where comes there coins: from yerterday's pool mining or from my current solo mining. |
|
|
|
|
ifilin
Newbie
Offline
Activity: 14
Merit: 0
|
|
January 31, 2018, 10:04:39 PM
Last edit: January 31, 2018, 10:19:02 PM by ifilin |
|
Guys, mined solo some coins in wallet 1.1.2. Sent 1000 Rois to cryptohub.online. Coins didn't appear at exchange. And I don't see Transaction ID: 61f8e2dc9fe6a63c21f3e06a946aa8a72e058d0ebf34b040110b27e415697834-000 at https://roi-coin-blockexplorer.roi-coin.com/ . What to do? |
|
|
|
|
|
DisasterFaster (OP)
|
|
January 31, 2018, 10:22:33 PM |
|
Guys, mined solo some coins in wallet 1.1.2. Sent 1000 Rois to cryptohub.online. Coins didn't appear at exchange. And I don't see Transaction ID: 61f8e2dc9fe6a63c21f3e06a946aa8a72e058d0ebf34b040110b27e415697834-000 at https://roi-coin-blockexplorer.roi-coin.com/ . What to do? It is very likely you mined those coins on the wrong chain and so you won't be able to send them to any exchange. |
|
|
|
|
TheRaster
Member
Offline
Activity: 391
Merit: 14
|
|
February 01, 2018, 08:28:32 AM |
|
I reviewed my clients, but nowhere there are line "accepted". There are only lines like this:
[2018-01-31 15:26:45] thread 0: 977 hashes, 91.94 hash/s
[2018-01-31 15:26:55] thread 0: 1044 hashes, 98.59 hash/s
[2018-01-31 15:26:58] LONGPOLL pushed new work
[2018-01-31 15:27:03] LONGPOLL pushed new work
[2018-01-31 15:27:03] thread 0: 415 hashes, 58.81 hash/s
[2018-01-31 15:27:13] thread 0: 986 hashes, 93.22 hash/s
It this OK ?
Is there some way to get in general more info about my mining, something like, understand when find block or something useful. Because right how, on every 1-2h I'm receiving ~ 20ROI in my wallet but did't get any info for this.
which pool are you mining to ? they each have their own tracking info on their website. On your side you can add -D for debug and -P for protocol information. I'm doing solo mining. I have started Wallet at Computer with IP 192.168.0.100 and 10 other computers which mining with follow options -a hodl --url=http://192.168.0.100:23110 -u mine -p miner --coinbase-addr=mywallletaddress... The strange point for me is that I cannot find out from which mining comes from the coins in my Wallet. As I mentioned I'm receiving ~20ROI on each 1-2h More than 30 hours these 10 machines was in mining to coinspool.cu.cc , Today I decide to switch to my solo mining as I show above. If you want more exact tracking please create a receiving address with label like MINER 1. Then on miner 1 put that address in the conf file. Create receiving address like MINER 2 and then on miner 2 use that address. If you have 1 receive address on 10 miners it will be very hard to track that. OK I'll try this with different addresses, but currently is there some way to find out from where comes there coins: from yerterday's pool mining or from my current solo mining. Yes go to receive on the wallet and make a new address. Eg... Solo, optiminer pool, coins pool, cluster, bank. Use the address in the config that corresponds to the place you are mining. |
|
|
|
dvbb
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 01, 2018, 09:15:35 AM |
|
I reviewed my clients, but nowhere there are line "accepted". There are only lines like this:
[2018-01-31 15:26:45] thread 0: 977 hashes, 91.94 hash/s
[2018-01-31 15:26:55] thread 0: 1044 hashes, 98.59 hash/s
[2018-01-31 15:26:58] LONGPOLL pushed new work
[2018-01-31 15:27:03] LONGPOLL pushed new work
[2018-01-31 15:27:03] thread 0: 415 hashes, 58.81 hash/s
[2018-01-31 15:27:13] thread 0: 986 hashes, 93.22 hash/s
It this OK ?
Is there some way to get in general more info about my mining, something like, understand when find block or something useful. Because right how, on every 1-2h I'm receiving ~ 20ROI in my wallet but did't get any info for this.
which pool are you mining to ? they each have their own tracking info on their website. On your side you can add -D for debug and -P for protocol information. I'm doing solo mining. I have started Wallet at Computer with IP 192.168.0.100 and 10 other computers which mining with follow options -a hodl --url=http://192.168.0.100:23110 -u mine -p miner --coinbase-addr=mywallletaddress... The strange point for me is that I cannot find out from which mining comes from the coins in my Wallet. As I mentioned I'm receiving ~20ROI on each 1-2h More than 30 hours these 10 machines was in mining to coinspool.cu.cc , Today I decide to switch to my solo mining as I show above. If you want more exact tracking please create a receiving address with label like MINER 1. Then on miner 1 put that address in the conf file. Create receiving address like MINER 2 and then on miner 2 use that address. If you have 1 receive address on 10 miners it will be very hard to track that. OK I'll try this with different addresses, but currently is there some way to find out from where comes there coins: from yerterday's pool mining or from my current solo mining. Yes go to receive on the wallet and make a new address. Eg... Solo, optiminer pool, coins pool, cluster, bank. Use the address in the config that corresponds to the place you are mining. Thank you for suggestion. There are something suspicious for me or just I didn't understood the difference between Solo and Pool mining. More than 12Hours I'm mining with 10 computers ~3 KH/sec to my Wallet and still there are no ROI When mining to Wallet, I'll get 120 ROI only when find block and nothing else during the mining ? When mining to Pool, I'll get 120ROI when find block and some payment for the mining ? I'm confused . Can somebody explain please |
|
|
|
|
ghobson
Full Member
Offline
Activity: 250
Merit: 100
Crypto Developer
|
|
February 01, 2018, 09:47:09 AM |
|
Thank you for suggestion. There are something suspicious for me or just I didn't understood the difference between Solo and Pool mining. More than 12Hours I'm mining with 10 computers ~3 KH/sec to my Wallet and still there are no ROI When mining to Wallet, I'll get 120 ROI only when find block and nothing else during the mining ? When mining to Pool, I'll get 120ROI when find block and some payment for the mining ? I'm confused . Can somebody explain please google is your friend https://captainaltcoin.com/what-is-pool-mining/ |
Join the boid community, earn crypto while doing real research with your cpu/gpu boid.com |
|
|
dvbb
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 01, 2018, 09:57:01 AM |
|
Thank you for suggestion. There are something suspicious for me or just I didn't understood the difference between Solo and Pool mining. More than 12Hours I'm mining with 10 computers ~3 KH/sec to my Wallet and still there are no ROI When mining to Wallet, I'll get 120 ROI only when find block and nothing else during the mining ? When mining to Pool, I'll get 120ROI when find block and some payment for the mining ? I'm confused . Can somebody explain please google is your friend https://captainaltcoin.com/what-is-pool-mining/OK I'll read it. One more stupid question: Does I'm successfully mining to Wallet in case all clients show only thread 0: 977 hashes, 91.94 hash/s thread 0: 1044 hashes, 98.59 hash/s LONGPOLL pushed new work LONGPOLL pushed new work thread 0: 415 hashes, 58.81 hash/s thread 0: 986 hashes, 93.22 hash/s There are no lines like, "accepted: 1/1 (100.00%), 72.98 hash/s (yay!!!)" , or it show such lines only when mining with Pool ? |
|
|
|
|
|
zajiczech
|
|
February 01, 2018, 11:21:34 AM |
|
Is the pool coinspool.cu.cc down? Unable to load the page and miner lost connection as well at night...
|
|
|
|
|
|
