LUXCoin—New PHI2 PoW/PoS Hybrid—SC—SegWit—PrivateSend—PoS Web Wallet—LuxGate

[syphen]

lux was a coin that i missed . But thanx to the market crash , i got the opportunity again

[1715194835]

1715194835

[1715194835]

1715194835

[Ginzink]

lux was a coin that i missed . But thanx to the market crash , i got the opportunity again

I remember the last bounce from 5 to 15 not long ago how i regreted not having more. This time i will have alot more as the price reduction have reduced number of miners combined with more new 1080 ti cards!

[Imbalance911]

   

                              
                                 
   LUX-01   IS OPEN FOR RESERVATION!                           
                                 
   **Good day, colleagues!**                              
   We decided to make a serious move and start a LUX masternode! This is an expensive masternode and a serious investment.At the moment, the devsare finishingthe optimal MN rewarding system.                              
   We will do the gathering in twosteps.                              
                                 
   **Step 1. PoS**                              
   Every Wednesday we will transfer gathered coins to a separate wallet for PoS. While gathering continue, your share will be increasing because of PoS. Of course, you can also increase your share by additional transfers.If you want to leave, it will take us up to three days to find a replacement. Minimal seat is 10 coins;                              
                                 
   **Step 2. MN**                              
   As soon as we gather necessary 16120 coins, we will start the MN. Payouts are weekly, on Wednesday. Leaving takes up to a week, we will do it after payouts. Servicecommissionis 4% ofincome.                              
                                 
   - No Setup Fee                              
   - When POS  Fee = 0% !!!!!!!!                              
   - When MN Enabled Fee = 4%                              
   - When POS Everyweek UPDATE                              
   - When MN Enabled Everyweek Payouts                              
                                 
   Reserved coins:   4317                           
   Received coins:   3008.204                           
   Available:   8794.796                           
                                 
   OUR  POS WALLET: https://explorer.luxcore.io/address/LSCB3sjRd2uErnueqT4HBJJySYxoRc9TXP                              
   Join our Discord server: https://discord.gg/5xmR5WR                               
   https://www.mnforall.com                              

[pari13]

How many coins do you need to POS?

[ripcurrent]

When will the new mining algo go into effect?

[lupanar]

How many coins do you need to POS?

Read few posts above pls.

When will the new mining algo go into effect?

Will be announced in advance,  stay turned.

[bitcoinreviews]

Where do I find my private key in  PC wallet so I can import my wallet in web wallet?

[d_fernandez]

how is the new exchanges listing going on? is there a posibility to have one soon or is it taking more effort than thought?

[lupanar]

Where do I find my private key in  PC wallet so I can import my wallet in web wallet?

Run qt wallet, go to Instruments - > Console, type command   

Code:

dumpprivkey your_wallet_address

It will show you private key of your single address, do it for all your addresses where coins stored.
Then just import prv keys to web wallet.

how is the new exchanges listing going on? is there a posibility to have one soon or is it taking more effort than thought?

Still in work, nothing to share currently yet.

[Ginzink]

Snip

I just got to thinking. We want more miners to move away from bsod. Im on unimining myself. But maybe it would help if you contacted OCminer and he set up Suprnova for LUX?
That is a very good and popular pool which could possibly help. Now we just get spammed with alot of small pools that "no one" has heard about.

[lupanar]

I just got to thinking. We want more miners to move away from bsod. Im on unimining myself. But maybe it would help if you contacted OCminer and he set up Suprnova for LUX?
That is a very good and popular pool which could possibly help. Now we just get spammed with alot of small pools that "no one" has heard about.

He's been contacted almost from project beginning with proposal to list Lux at Suprnova, but for some reason he refused to do it. Think no need to contact again with, Lux has more than enough pools now including biggest ones like Yiimp and Zpool.

Anyway, spreading  the mining hashes between available pools is best way to avoid 51% attack menace... so lets spread it!

Code:

https://zpool.ca/
http://zergpool.com/
http://yiimp.eu/
https://www.unimining.net/
https://umine.org/
https://titan-mining.net/
https://spool.cloud/ 
http://rushhourmining.com/
https://www.quantumminingpool.com/
https://www.ominousnetwork.com/
https://pool.hashrefinery.com/
https://pool.coin-miners.info/
https://www.phi-phi-pool.com/
http://pickaxe.pro/
https://www.omegapool.cc/
https://miner-control.de/
https://minepool.com/
https://minemoney.co/ 
https://hive.gulfcoastmining.com/
http://hashfaster.com/
https://gos.cx/
https://futurecoins.club/
https://fairmine.pro/
http://epicpool.net/
https://bsod.pw/
http://bpool.io/
http://bitcoin-pool.de/
https://blockmuncher.com/
http://antminepool.com

[dave_bbp]

I downloaded a new wallet v.4.3 - deleted all files in the /Roaming/lux folder but the wallet does not start, here are the logs:

GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry:  120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).

What should I do to start it?

do you have wallet.dat file?

I have copied the wallet.dat file in advance.

Glad to hear it! Would be a shame to loose your Lux
Did you get the needed help?

No, no one helped. At me such 1-st time happens. I even delete everything in the folder /appdata/LUX  but I can not start, the error pops up!

Try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf

This guide I downloaded, but does not start the wallet, writes a bug in the program and closes the program. And in the logs he writes, what I wrote above.

Try to run your wallet.dat on another pc - run lux-qt, close it, replace wallet.dat by yours old one in %appdata%/Lux, run lux-qt

Hello all. I have the exact same problem on Windows 10. The GUI wallet worked perfectly until yesterday, but today it won't start and just leaves the above mentioned errors in the log. Was there ever a solution to this?

[nabproject]

If you dont have enough coins or skills to run you own MN, use MY service

Join the shared masternode service NAB_PROJECT_SHARED_MN

- service commission is only 2% of the income
- 1 seat = 5% of MN
- No setup fee
- Collateral lock time 7 days
- easy to get in, easy to get out
- fully transparent work
- Weekly payout(Saturday) or reinvest available

Join our discord channel
https://discord.gg/cmBseGk

[ztaz]

what will happen after the 300,000 block say some hard fork ...

[lupanar]

I downloaded a new wallet v.4.3 - deleted all files in the /Roaming/lux folder but the wallet does not start, here are the logs:

GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry:  120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).

What should I do to start it?

do you have wallet.dat file?

I have copied the wallet.dat file in advance.

Glad to hear it! Would be a shame to loose your Lux
Did you get the needed help?

No, no one helped. At me such 1-st time happens. I even delete everything in the folder /appdata/LUX  but I can not start, the error pops up!

Try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf

This guide I downloaded, but does not start the wallet, writes a bug in the program and closes the program. And in the logs he writes, what I wrote above.

Try to run your wallet.dat on another pc - run lux-qt, close it, replace wallet.dat by yours old one in %appdata%/Lux, run lux-qt

Hello all. I have the exact same problem on Windows 10. The GUI wallet worked perfectly until yesterday, but today it won't start and just leaves the above mentioned errors in the log. Was there ever a solution to this?

In most of cases helps using of older another backup of wallet.dat.
Also you can try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf

If you dont have another backup and guide above didnt helped, follow the guide that help to import private keys to new wallet.dat https://cdn.discordapp.com/attachments/379684706859483137/451479873534427136/LUX_dump_import_privkeys.txt

what will happen after the 300,000 block say some hard fork ...

Yes, big changes planned ahead, preliminary block height is 300k but it can be pushed if needed.

[dave_bbp]

I downloaded a new wallet v.4.3 - deleted all files in the /Roaming/lux folder but the wallet does not start, here are the logs:

GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry:  120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).

What should I do to start it?

do you have wallet.dat file?

I have copied the wallet.dat file in advance.

Glad to hear it! Would be a shame to loose your Lux
Did you get the needed help?

No, no one helped. At me such 1-st time happens. I even delete everything in the folder /appdata/LUX  but I can not start, the error pops up!

Try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf

This guide I downloaded, but does not start the wallet, writes a bug in the program and closes the program. And in the logs he writes, what I wrote above.

Try to run your wallet.dat on another pc - run lux-qt, close it, replace wallet.dat by yours old one in %appdata%/Lux, run lux-qt

Hello all. I have the exact same problem on Windows 10. The GUI wallet worked perfectly until yesterday, but today it won't start and just leaves the above mentioned errors in the log. Was there ever a solution to this?

In most of cases helps using of older another backup of wallet.dat.
Also you can try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf

If you dont have another backup and guide above didnt helped, follow the guide that help to import private keys to new wallet.dat https://cdn.discordapp.com/attachments/379684706859483137/451479873534427136/LUX_dump_import_privkeys.txt

what will happen after the 300,000 block say some hard fork ...

Yes, big changes planned ahead, preliminary block height is 300k but it can be pushed if needed.

Thank you for your reply. However this is not what the problem is here. My wallet.dat is perfectly allright, it works and syncs just fine on other PCs (running Win7). The problem is, that my main PC (Windows 10) won't start the QT application at all. As soon as I start lux-qt.exe it very briefly shows a blank window in the size of the start-splash and then closes itself again. This happens with a clean LUX folder in Roaming as well as with a fully synced one, in compatibility mode, in "run-as-administrator"-mode etc. I have no chance of opening the GUI on this PC; all that happens is that it puts the above mentioned lines into debug.log

P.S.: I'm really excited about all the things down the road. Keep up the good work!

[lupanar]

Thank you for your reply. However this is not what the problem is here. My wallet.dat is perfectly allright, it works and syncs just fine on other PCs (running Win7). The problem is, that my main PC (Windows 10) won't start the QT application at all. As soon as I start lux-qt.exe it very briefly shows a blank window in the size of the start-splash and then closes itself again. This happens with a clean LUX folder in Roaming as well as with a fully synced one, in compatibility mode, in "run-as-administrator"-mode etc. I have no chance of opening the GUI on this PC; all that happens is that it puts the above mentioned lines into debug.log

P.S.: I'm really excited about all the things down the road. Keep up the good work!

Sad to hear it, looks like some issue from your side. Anyway can suggest you to check your antivirus exceptions, might be AV soft blocking qt, and you always can use Lux web wallet, its more much comfortable to use compare with qt - no need to run it 24/7 if you staking your coins and be able to login into from any browser that around or even your mobile phone.

And thanks for kindly words 

[Ginzink]

what will happen after the 300,000 block say some hard fork ...

Yes, big changes planned ahead, preliminary block height is 300k but it can be pushed if needed.

So in about 9000 blocks we may have the big fork ready? I assume the new wallet will be out in good time so we have time to change

[StoneSoup]

I downloaded a new wallet v.4.3 - deleted all files in the /Roaming/lux folder but the wallet does not start, here are the logs:

GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry:  120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).

What should I do to start it?

do you have wallet.dat file?

I have copied the wallet.dat file in advance.

Glad to hear it! Would be a shame to loose your Lux
Did you get the needed help?

No, no one helped. At me such 1-st time happens. I even delete everything in the folder /appdata/LUX  but I can not start, the error pops up!

Try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf

This guide I downloaded, but does not start the wallet, writes a bug in the program and closes the program. And in the logs he writes, what I wrote above.

Try to run your wallet.dat on another pc - run lux-qt, close it, replace wallet.dat by yours old one in %appdata%/Lux, run lux-qt

Hello all. I have the exact same problem on Windows 10. The GUI wallet worked perfectly until yesterday, but today it won't start and just leaves the above mentioned errors in the log. Was there ever a solution to this?

In most of cases helps using of older another backup of wallet.dat.
Also you can try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf

If you dont have another backup and guide above didnt helped, follow the guide that help to import private keys to new wallet.dat https://cdn.discordapp.com/attachments/379684706859483137/451479873534427136/LUX_dump_import_privkeys.txt

what will happen after the 300,000 block say some hard fork ...

Yes, big changes planned ahead, preliminary block height is 300k but it can be pushed if needed.

Thank you for your reply. However this is not what the problem is here. My wallet.dat is perfectly allright, it works and syncs just fine on other PCs (running Win7). The problem is, that my main PC (Windows 10) won't start the QT application at all. As soon as I start lux-qt.exe it very briefly shows a blank window in the size of the start-splash and then closes itself again. This happens with a clean LUX folder in Roaming as well as with a fully synced one, in compatibility mode, in "run-as-administrator"-mode etc. I have no chance of opening the GUI on this PC; all that happens is that it puts the above mentioned lines into debug.log

P.S.: I'm really excited about all the things down the road. Keep up the good work!

I've seen this before on another QT based wallet. I don't remember the fix unfortunately. I understand it is having some sort of problem with loading the splash screen because of issue with the .png format. Use a drawing or image display app to check if you are able to load the splash screen, the png file may be corrupted. You can just create a new .png file and replace the one that comes with the wallet and see if that will load. Nt sure if there is maybe a switch to disable the splash screen at startup but you could check that on the Win 7 machine.

[lupanar]

Article with explaination of what can expect from upcoming Luxcore v5 launch available on Medium and Steemit!

https://medium.com/luxcore/luxcore-v5-the-revolution-will-be-televised-de38edd3eab5
https://steemit.com/luxcore/@luxcore/luxcore-v5-the-revolution-will-be-televised

https://twitter.com/LUX_COIN/status/1003340531114668035