Baikal X10 Multialgo Miner (Non-official Support Thread)

[Overlast]

Clear!
Thanks.

But what do i see in the photo? Are there 2 X10's that are not ok (sick)? Less hashrate?

[bigal82]

hey igotek,
which kind of PSUs are you using?

alex

[jb7032]

Igotek, Although I secretly dislike you due to the fact you have your miners and I don't, thank you for sharing. The info you are providing will help us get off the ground running much faster once we have our units. Keep up the good work.

[GunsN]

Thank you for this thread.
it is very usefull, I am waiting my miners next week

[igotek]

hey igotek,
which kind of PSUs are you using?

alex

2.5 mm2 3500 Watt 220 volt Power cable.
%94 efficiency Platinum Quality 2400 Watt PSU. (it is so good.)
16AVG 6PIN cables.

If you dont use X11 algorithm, you can connect up to 5 Baikal X10 miner.
When you have received your miner, connect it to the PSU and delete all of the default pools.
Then you can connect up to 5 miners on a PSU.
I will never use X11, so it is ok for me.



@jb7032
@GunsN

When you get your miners, you will be ready for mining.

[Marvell2]

hey igotek,
which kind of PSUs are you using?

alex

2.5 mm2 3500 Watt 220 volt Power cable.
%94 efficiency Platinum Quality 2400 Watt PSU. (it is so good.)
16AVG 6PIN cables.

If you dont use X11 algorithm, you can connect up to 5 Baikal X10 miner.
When you have received your miner, connect it to the PSU and delete all of the default pools.
Then you can connect up to 5 miners on a PSU.
I will never use X11, so it is ok for me.



@jb7032
@GunsN

When you get your miners, you will be ready for mining.

so many miners , I only ordered two not even first batch

[tomwrx]

Thanks for the usefull info, igotek. Which brand of Platinum Quality 2400 Watt PSU are you using? Thanks for sharing all that info

[igotek]

Thanks for the usefull info, igotek. Which brand of Platinum Quality 2400 Watt PSU are you using? Thanks for sharing all that info

I have PSU from DELL, HP and Delta.
You can check aliexpress for PSU.

[phuocduong]

dont have baikal to use it, i hope have x10 soon, thanks for you share app

[ZenoDiac]

When exactly did you order and pay?
My friend paid 13th September in BTC a still has no shipping details, I paid 15th September ans also nothing...

Did you pay to Baikal directly or asicminermarket ?
I paid the first day to directly Baikal. I also paid the shipping fee immediately when they request it.
I think there is some problems on the customs. You should receive the miner soon.

Hi Igotek

Thanks for your post and the pictures. Very nice!
Could you confirm if these direct Baikal banking details are correct? Because this is what they sent me:

"USD account number: 451-906-071-4
Beneficiary: VITCORE HOLDINGS LIMITED
Ajeltake Road, Ajeltake Island, Majuro
Tel: 692 247 3018
Fax: 692 247 3017
Bank Details:
Bank Name: United Overseas Bank Limited
Branch Name: UOB Main
Branch Address: 80 Raffles Place UOB Plaza
1 Singapore 048624
Bank Code: 7375
Swift Code: UOVBSGSG
Branch Code: 001."

I have some trust issue sending money off to a beneficiary in the Marshall Islands...
THanks in advance

[GunsN]

hey igotek,
which kind of PSUs are you using?

alex

2.5 mm2 3500 Watt 220 volt Power cable.
%94 efficiency Platinum Quality 2400 Watt PSU. (it is so good.)
16AVG 6PIN cables.

If you dont use X11 algorithm, you can connect up to 5 Baikal X10 miner.
When you have received your miner, connect it to the PSU and delete all of the default pools.
Then you can connect up to 5 miners on a PSU.
I will never use X11, so it is ok for me.



@jb7032
@GunsN

When you get your miners, you will be ready for mining.

I will receive miners (2) tomorrow or after tomorrow, I have 2X HP 1200w power supply, is it ok?
thanks

[craigh]

Hey

Got my X10 and running well on zpool. I have been playing with solo mining directly to a local wallet, but I can't get it to work. Has anyone managed to achieve solo mining? I know it may be less profitable, but I want to be able to mine new coins that aren't in pools.

Thanks

C.

[Shorty2520]

First of all great post igotek!

I have a question that baikal can‘t answer (misunderstanding in the meaning).

1.
Are the miners updated when they arrive? (I have 2nd batch)
If not .. what is the official source?

2.
And does the orange pi need a extra SD-Card, or is it included?



Can you please tell igotek? Thanks

[jb7032]

hey igotek,
which kind of PSUs are you using?

alex

2.5 mm2 3500 Watt 220 volt Power cable.
%94 efficiency Platinum Quality 2400 Watt PSU. (it is so good.)
16AVG 6PIN cables.

If you dont use X11 algorithm, you can connect up to 5 Baikal X10 miner.
When you have received your miner, connect it to the PSU and delete all of the default pools.
Then you can connect up to 5 miners on a PSU.
I will never use X11, so it is ok for me.



@jb7032
@GunsN

When you get your miners, you will be ready for mining.

I will receive miners (2) tomorrow or after tomorrow, I have 2X HP 1200w power supply, is it ok?
thanks

For sure, Depending on which algo you are mining you could easily power both units off of a single 1200w server psu. Assuming you won't be mining X11 the most they will pull is 390w according to the website. In a million years when they ship mine I will do at least 2 of my 3 from a single 1200w hp unit.

[RfBTC]

Hello


Baikal X10,  at 10 GH/s Quark  mines 0,004 BTC / day (around 40$/day)  with  only 180w  ?   thats true ?  could you upload screenshot with Wattage comsuption & mined amount ?    thanks


P.D. Past week  the profit was around 60$ / day , now its 40$ / day

[igotek]

Hi Igotek

Thanks for your post and the pictures. Very nice!
Could you confirm if these direct Baikal banking details are correct? Because this is what they sent me:

"USD account number: 451-906-071-4
Beneficiary: VITCORE HOLDINGS LIMITED
Ajeltake Road, Ajeltake Island, Majuro
Tel: 692 247 3018
Fax: 692 247 3017
Bank Details:
Bank Name: United Overseas Bank Limited
Branch Name: UOB Main
Branch Address: 80 Raffles Place UOB Plaza
1 Singapore 048624
Bank Code: 7375
Swift Code: UOVBSGSG
Branch Code: 001."

I have some trust issue sending money off to a beneficiary in the Marshall Islands...
THanks in advance

USD account number: 451-906-071-4
Beneficiary: VITCORE HOLDINGS LIMITED
Ajeltake Road, Ajeltake Island, Majuro
Tel: 692 247 3018
Fax: 692 247 3017
Bank Details:
Bank Name: United Overseas Bank Limited
Branch Name: UOB Main
Branch Address: 80 Raffles Place UOB Plaza
1 Singapore 048624
Bank Code: 7375
Swift Code: UOVBSGSG
Branch Code: 001

This is their bank account.
I paid to this bank account.
Trust Baikal, they ship the miners.

Hey

Got my X10 and running well on zpool. I have been playing with solo mining directly to a local wallet, but I can't get it to work. Has anyone managed to achieve solo mining? I know it may be less profitable, but I want to be able to mine new coins that aren't in pools.

Thanks

C.

The solo mining with ASIC is not possible at the moment.
If anyone find it, it will be perfect.

I will receive miners (2) tomorrow or after tomorrow, I have 2X HP 1200w power supply, is it ok?
thanks

Please be sure you connect one miner to this PSU and set the pools. (Dont set any X11 pools.)
Then do the same for the second miner.
All done !
You can connect two Baikal X10 to HP 1200 Watt.
And one miner is enough for two Baikal X10.

If you want to mine X11 coins, only use one PSU to one miner.

First of all great post igotek!

I have a question that baikal can‘t answer (misunderstanding in the meaning).

1.
Are the miners updated when they arrive? (I have 2nd batch)
If not .. what is the official source?

2.
And does the orange pi need a extra SD-Card, or is it included?



Can you please tell igotek? Thanks

1. It s not clear now. They didnt announce the time of the other two algorithms yet.
2. Yes, there is an Orange Pi Zero with a SDCARD on each miner.

Hello


Baikal X10,  at 10 GH/s Quark  mines 0,004 BTC / day (around 40$/day)  with  only 180w  ?   thats true ?  could you upload screenshot with Wattage comsuption & mined amount ?    thanks


P.D. Past week  the profit was around 60$ / day , now its 40$ / day

Quark algorithm needs 360 Watt for 10 GH/s. Tested with wattmeter.
I have only tested and checked all algorithms and voltage and fan loud.
The profit is good. For Quark algo, Nicehash gives the best profit.
The daily profit is around 40 USD now.

[craigh]

Hello


Baikal X10,  at 10 GH/s Quark  mines 0,004 BTC / day (around 40$/day)  with  only 180w  ?   thats true ?  could you upload screenshot with Wattage comsuption & mined amount ?    thanks


P.D. Past week  the profit was around 60$ / day , now its 40$ / day

Quark runs at 360W according to the specification: https://pbs.twimg.com/media/DNYbXcfV4AA2LO7.jpg:large

I'm going to test real-world wattage when my electricity monitor arrives later this week.

I think Quark is more like $35 a day profit after electricity costs. Still too early for me to tell for sure!

C.

[tomwrx]

igotek, are you using these adapters with your hp psu https://www.ebay.com/itm/DPS-1200FB-800GB-Power-Supply-Breakout-Board-Adapter-Fur-Ethereum-Mining-/222593665370?hash=item33d39dc95a ?

i see only 9 pci-e slots in it. How can you connect two x10 to one psu, when one x10 needs 6 pci-e slots?

[mano237]

Hello!
I can call myself a happy one because I also got mine today & already tried out nicehash quark and dgb myr griestl.

But what I am thinking about is mining poolhub. Its possible there to mine every algo on miningpoolhub which the X10 supports if I am right.
So it would be a great choice to go with miningpoolhub because the miner switches to the coin which is the profitablest one atm. (I read something about that, thats right?) Furthermore I can auto exchange it to any coin I want.
Is there any disadvantage with miningpoolhub?
Somebody alrdy tested ?

[igotek]

igotek, are you using these adapters with your hp psu https://www.ebay.com/itm/DPS-1200FB-800GB-Power-Supply-Breakout-Board-Adapter-Fur-Ethereum-Mining-/222593665370?hash=item33d39dc95a ?

i see only 9 pci-e slots in it. How can you connect two x10 to one psu, when one x10 needs 6 pci-e slots?

Check this link

I use the same break out board for the PSU.
I have 2400 Watt Paltinum PSU and it can be connected to two breakout board.
Each breakout board has 9 X 6 PIN power connector.
I have total 8 X 6 PIN power cables on a PSU.
Just calculate your power needs then connect it.
Be careful whlie connecting multiple X10 to a PSU.

Hello!
I can call myself a happy one because I also got mine today & already tried out nicehash quark and dgb myr griestl.

But what I am thinking about is mining poolhub. Its possible there to mine every algo on miningpoolhub which the X10 supports if I am right.
So it would be a great choice to go with miningpoolhub because the miner switches to the coin which is the profitablest one atm. (I read something about that, thats right?) Furthermore I can auto exchange it to any coin I want.
Is there any disadvantage with miningpoolhub?
Somebody alrdy tested ?

I have never trid miningpoolhub with X10. But I have used their pool with Cube and mini miners Baikal.
It was good. Not bad.

The profitable coin mining is possible for Quark, Qubit, and X11 with Nicehash.
Myriad groestl with zpool
Skein with zpool
I dont like zpool. it give less coin than the other pools.

DGB Myriad-Gorestl: https://dgb-groestl.theblocksfactory.com
VERGE Myriad-Groestl: http://xvg-mg.idcray.com/

I use these two pools which are the best pools now for Baikal X10.
There are different pools around. Just try them and post your results here.