RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 06, 2018, 10:59:49 AM |
|
Another fire hazard is dust, dont let any dust build up near to a bunch of hot cards or it will possibly provide fuel for some damage to occur. Get out the hoover if need be. I dont know about interference especially but some kind of cheap faraday cage around the setup might be an easy solution. everything else is horribly expensive save electricity ($0.04kWh) and electronics
I missed where is the electricity this cheap, you pay bulk rates I take it ? solar or hydro power would be ideal but theres setup costs to it dust and fluff is not only fire hazard but build up of it inside the airways and circuit board of the Vega can cause bridging between curcuit components and fry the card and/or block the heat sink thus causing overheating and again diminish performance and/or fry the card the front panel of the Vega is easy enough to remove (6 screws) providing easier air flow thus better cooling but again the key to keeping your cards cool is AMBIENT temp and not fan speed as running 40C ambient air through the heat sink at 2000rpm has almost the same effect as 4000rpm yeap, i live in beatiful Norway where electricity is produced via hydroelectric dams at an average retail consumer cost of USD0.04kWh and the outside temp right now (winter) is -10C here just outside Oslo. dont feel so bad the oil money is placed in a fund that is used ONLY to support the global ponzi dollar scam and not invested in the country itself managed by a special EU body of non norwegian non elected nobody yesmen
|
to mine or not to mine, is not a question...
|
|
|
oblione
Newbie
Offline
Activity: 71
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 08, 2018, 02:30:46 PM |
|
Hello im considering building a Vega rig for mining xmr . Can i get some suggestions with an either 4 or 6 card vega 64 build I want something stable (not counting initial time building setting it up ofcorse) that i do not have to micromanage/troubleshoot every few days/weeks. electricity is around 10-11 $USD cents here in canada
im thinking: 6x Gigabyte Vega 64 Intel Pentium G4400 2x 900W HP Server platinum power supply @220 32GB thumb drive for hard drive
thats as far as i got so far, need suggestions for motherboard and ram
If you want to run 6 x 64's then you are going to need a decent ssd drive as you'll need to set at least 60gb as virtual memory if you want to get them all running on a single rig without the miner constantly freezing and crashing every 20 mins to a few hours.
|
|
|
|
RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2018, 12:00:44 AM |
|
i noticed with Cast XMR (CRYPTONIGHT) that one of the cards in each rig heats up significantly more than the rest found its the number 1 in the NTool dropdown select dont know why dont ask, i just set the fan speed higher on that one up to compensate ---------------------------------------------------- AND MY FRIENDS for all the shit i had to put up with in the beggining of this thread im BACK ON ETH hahahhahahahahah with the same setup as stated in the beggining of this thread running the dirty dozen at 528MH/s 2610W stable ps getting a new toy soon ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
to mine or not to mine, is not a question...
|
|
|
POM
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2018, 06:32:44 AM |
|
So I have a MSI Vega 56 air boost and a XFX Vega 64 reference model. the 56 is rock solid at 42MH/s without breaking a sweat but man this 64 can't cool itself down. it starts off at around 41MH/s and throttles down to 37MH/s. i've been using 1100MHz, -30 freq, 3000-3700 fan, -13 power limit on the blockchain driver. 56 is 950MHz, -30 freq, 3000-3600 fan, -15 power limit and its outperforming the 64 in every possible way.
I'm updating my drivers and trying out your wattman settings, will report back.
|
|
|
|
Bimmber
Newbie
Offline
Activity: 210
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2018, 07:53:13 AM |
|
Why on earth anybody even produces those blower cards if they can`t handle the work ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
|
deliciousblocks
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 14, 2018, 11:18:11 PM |
|
Is there a way to lower voltage to less than 860mv for GPU? I can't make my Vega 64 to slow down, it will mine ETH 37MH/s minimum and 42 MH/s when tuned.
But there is no way to lower hashrate and decrease power draw. -50% power does nothing, 850MHz(minumum) on core does nothing - it will not mine slower than 37MH/s. This is the first time I see something like this on a GPU. I mean I don't mind because the power draw is low but seriously.. What if I want to go lower than 150W power draw? It will not crash, it will not lower voltage, it just goes fast and doesn't listen to me.
|
|
|
|
RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 15, 2018, 02:12:28 AM |
|
Is there a way to lower voltage to less than 860mv for GPU? I can't make my Vega 64 to slow down, it will mine ETH 37MH/s minimum and 42 MH/s when tuned.
But there is no way to lower hashrate and decrease power draw. -50% power does nothing, 850MHz(minumum) on core does nothing - it will not mine slower than 37MH/s. This is the first time I see something like this on a GPU. I mean I don't mind because the power draw is low but seriously.. What if I want to go lower than 150W power draw? It will not crash, it will not lower voltage, it just goes fast and doesn't listen to me.
if these are your prerequisites for mining then the vega is not your best option, I personally go for top speed and dont care about elec cost as its negligible that's why I just rigged a VEGA FRONTIERrunning on 2050H/s easy pics at the link https://imgur.com/0OOhzcvhttps://imgur.com/XJlsJzLwhat a pain to get it started though, I will get into later but a lot of driver cooking was involved 5 Frontiers to go......
|
to mine or not to mine, is not a question...
|
|
|
RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 17, 2018, 11:06:45 PM |
|
added one more
had to do some voodoodrivercooking and disable/uninstall device/restarts before they both disabled enabled
cant really explain, will have t wait a bit for a write up but both are running for a total of
2xVega Frontier 4100H/s
|
to mine or not to mine, is not a question...
|
|
|
RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 01:17:03 PM |
|
added one more
had to do some voodoodrivercooking and disable/uninstall device/restarts before they both disabled enabled
cant really explain, will have t wait a bit for a write up but both are running for a total of
2xVega Frontier 4100H/s
I've got Vega 56's working well. What "voodoo" did you do for the frontier? I just got one that I would like to install this coming weekend. I'm mostly interested in your comment about "voodoodrivercooking"? thanks. download and have ready jan4 adrenalin driver and unpacked aug24 blockchain and know the path to it usualy its: c:amd/packages/drivers/display/WT6A_INF/C03117304 ddu drivers instal jan4 adrenalin with no card connected switch off instal FE switch on...wait...wait...wait... goto device manager make sure its recognised and functioning disable enable wait as long as it takes, enabled will prob have a triangle no matter, update driver by have disk browse the path to unpacked blockchain driver when update complete disable enable again -it should work *NO RESTART*- happy mining if not working there is more, especialy for more than 1 FE will update later, im trying to get them mining 4 threads each
|
to mine or not to mine, is not a question...
|
|
|
STT
Legendary
Offline
Activity: 4032
Merit: 1440
Exchange 250+ Coins With 0% Fees
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 07:51:10 PM |
|
Has anyone tested the latest release to see if its improving on the blockchain drivers for overall hashing speed or even just one protocol ?
Right now I find Skunk is the easiest protocol to keep stable and with the lowest wattage, but I know most people go with cryptonight of course.
|
| | TheChange | | | | |
░░░░░░░░░░██▄ ▄▄▄▄▄▄▄▄▄▄▄███▄ ▀▀▀▀▀▀▀▀▀▀▀███▀ ░░░░░░░░░░██▀ ░░░▄▄ ▄██▀ ███████████████ ▀██▄ ░░░▀▀ | | | | +250 COINS | | ..Crypto Exchange.. | │ | ▄▄▄▄ ▄▄▄███▀▀███▄▄▄ ▄█████▀▀░▄▄▄▄░▀▀█████▄ ██▀░▄▄▄████████▄▄▄░▀██ ██░████████████████░██ ██░████████████████░██ ██░▀██████████████▀░██ ██░▀████████████▀░██ ▀██░▀██████████▀░██▀ ▀██▄░▀██████▀░▄██▀ ▀██▄▄░▀▀░▄▄██▀ ▀▀██▄▄██▀▀ ▀▀▀▀ | | | │ | |
|
|
|
RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2018, 02:24:41 PM Last edit: January 25, 2018, 02:52:23 PM by RIGED |
|
Has anyone tested the latest release to see if its improving on the blockchain drivers for overall hashing speed or even just one protocol ?
Right now I find Skunk is the easiest protocol to keep stable and with the lowest wattage, but I know most people go with cryptonight of course.
I've been hearing a lot of miners have stability problems mining cryptonight including my bro, hes switching to ETH@44.5MH/s as the profitability is nearing on the cryptonight coins and is the undisputed king of GPU mining (I detest asic mining as its been infiltrated sodomised and CONTROLLED, thus loosing the status of decentralised people power, include ripple in that) I have no stability issues as my miners run days on end without restarts or any attention and before you ask me how read this thread as I have outlined in painful detail the steps I have taken so far today I abandoned ETN, troubles with their wallet have gotten the better of my patience as after over a month waiting for an answer from their support team has gone unanswered which is unacceptable for a 3/4 billion usd company they are muppets and their coin is a gimmick as phone mining at max 100h/s yields pennies whilst killing phone resources i suggest you look into hashvault.pro as they offer pool mining with very low payment thresholds, difficulty variance ports and an almost realtime dashboard (hover/click mouse over miner hashrate for forced update) they offer ALL the cryptonight coins for mining including the very new ones, im using them for SUMOKOIN and are pleased with the service to add, having realised that the vast majority of miners are very electricity usage to hash power oriented (which is not applicable to me) i am working on a thermal to elecrical feedback loop thus converting some of the lost energy (as heat) back to electricity and feeding back to the miner. This project is work in progress as i am designing a closed rig that will be functional for only blower type GPUs like the Vegas, more of that later as im waiting for delivery of the heat exchange device to test efficiency and ths feasibility
|
to mine or not to mine, is not a question...
|
|
|
treanski
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2018, 03:26:56 PM |
|
PLEASE HELP!!!
My windows 10 - 4 * Vega64 rig has always behaved in this manner;
On any given boot/reboot, it will detect a random number of cards (1-4) in roughly this proportion; * 80% of the time it will detect 3 cards * 10% of the time it will detect 2 cards * 5% of the time it will detect 1 card * 5% of the time it will detect 4 cards
This is incredibly frustrating and sometimes I have to remote in and reboot 15-25 times in a row just to get all 4 cards showing up! If I'm lucky, it will work first time.
Is this a known problem? are there any available solutions?
I have a 4 * Vega56 rig that never behaves like this, 100% of the time 4 cards are seen in Windows.
check your pci risers, i bet my balls you connected them with sata or some of them are faulty
|
|
|
|
MingMining
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2018, 05:05:00 PM |
|
PLEASE HELP!!!
My windows 10 - 4 * Vega64 rig has always behaved in this manner;
On any given boot/reboot, it will detect a random number of cards (1-4) in roughly this proportion; * 80% of the time it will detect 3 cards * 10% of the time it will detect 2 cards * 5% of the time it will detect 1 card * 5% of the time it will detect 4 cards
This is incredibly frustrating and sometimes I have to remote in and reboot 15-25 times in a row just to get all 4 cards showing up! If I'm lucky, it will work first time.
Is this a known problem? are there any available solutions?
I have a 4 * Vega56 rig that never behaves like this, 100% of the time 4 cards are seen in Windows.
check your pci risers, i bet my balls you connected them with sata or some of them are faulty Agree. It has to be the pci-e risers. Sata connection is ok though. I bought some Rosewill riser from newegg. Very stable.
|
|
|
|
RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2018, 03:50:57 PM |
|
just for clarity, i know that ETH mining with these cards does not (at present) yield the best returns in terms of financial gain when compared to other coins, but being a crypro miner, for me at least, is not only about making money but primarily its about BUSTING THE BANKS, i fucking hate them and the current debt slave system imposed on us without consent and by sheer indoctrination from cradle. If looking at the financial aspect one also has to consider further gains from price fluctuations so cashing in ETH for anything else today, can lead to dismay in the future when ETH price moons. (i know this from my experience in trading commodities) i am very passionate on this subject as i have internal knowledge of the current global financial system and i would need terabytes to outline the details, history, and implications of our current reality. Being a crypto miner no matter the scale is an act of REVOLUTION against the fat lazy greedy subhuman pieces of excrement taking all of us for a ride with their tri tier system of control, namely interest, inflation, taxation. this man deserves recognition for his elloquence in telling the IRS to FUCK OFF: https://www.youtube.com/watch?v=XdCfk7a2Va0BE A REVOLUTIONARY AND MINE well, well, haven't we come full circle this is to all of you whom called me stupid, dumb and even criminal, i have rather enjoyed the ETH price hike from $350 when i started mining to the current $1.150 as it allowed me to completely pay off the rig costs in 50days and are now mining on pure profit with cryptonight coin prices plummeting, ETH/ETC are just as if not more profitable was an avid ETN miner until I got fed up with their shitty wallet and non existent service, did the sumo for while and now back to ETH as it shows more promise than any other crypto currency as I had originaly thought got the 12 x 64Vegas on ETH 44+MH/s stable but I'm having problems with the FE's as i cant get them to hash above 42MH/s any suggestions are very welcome
|
to mine or not to mine, is not a question...
|
|
|
Marvell2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2018, 04:21:13 PM |
|
so how do you solve the problem where the cards start at 44mhs then after around 10 to 30 mins they settle in at 39 mhs for vega 56 flashed to 64 and 37.5 mhs for my two frontier cards?
im running 1100 mem and 1200 core on all card, aug block chain
|
|
|
|
RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2018, 05:37:47 PM Last edit: February 02, 2018, 06:03:44 PM by RIGED |
|
so how do you solve the problem where the cards start at 44mhs then after around 10 to 30 mins they settle in at 39 mhs for vega 56 flashed to 64 and 37.5 mhs for my two frontier cards?
im running 1100 mem and 1200 core on all card, aug block chain
i have addressed the declining hash rate in this thread and have provided full details of the setup in previous pages, details too lengthy to retype, please read the thread as far as the FEs go I'm getting 46.3MH/s stable on each by using the Hellæ softpowerplay tables edited to unlock SoC to 1200MHz, method again detailed previously for the FEs I'm using the table settings stated above and then using NTool to edit: CPU P6 1248 950mV CPU P7 1422 950mV MEM P3 1198Mhz 950mV Power Target -24% having trouble with the 64s above MEM P3 1100MHz
|
to mine or not to mine, is not a question...
|
|
|
treanski
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2018, 05:42:17 PM |
|
PLEASE HELP!!!
My windows 10 - 4 * Vega64 rig has always behaved in this manner;
On any given boot/reboot, it will detect a random number of cards (1-4) in roughly this proportion; * 80% of the time it will detect 3 cards * 10% of the time it will detect 2 cards * 5% of the time it will detect 1 card * 5% of the time it will detect 4 cards
This is incredibly frustrating and sometimes I have to remote in and reboot 15-25 times in a row just to get all 4 cards showing up! If I'm lucky, it will work first time.
Is this a known problem? are there any available solutions?
I have a 4 * Vega56 rig that never behaves like this, 100% of the time 4 cards are seen in Windows.
check your pci risers, i bet my balls you connected them with sata or some of them are faulty Agree. It has to be the pci-e risers. Sata connection is ok though. I bought some Rosewill riser from newegg. Very stable. no sata connection is very bad for powerring risers, it will work some time, but you will probably burn your cables/hardware after some time. stop telling bullshit if you dont know shit, somebody could believe it and get damage. powering riser = 4pin or 6pin(6pin prefered) -> max 2 risers/cable
|
|
|
|
RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2018, 06:17:26 PM |
|
bro informed me of a hardware fix to lower MEM Temp
the CPU and Memory chips are placed next to each other and are serviced by the same heat sink Mem chips sit a millimeter or 2 lower than the CPU chip thus may (and apparently usually do) have no contact with the heat sink because the thermal paste is not applied correctly from manufacture
I will be opening all my GPUs in the next 2-3 months for regular servicing and application of extra thermal paste where needed (will take pics and post)
busy mining ETH before it becomes unavailable due to a possible shift to Proof of Work later on this year (second half?)
|
to mine or not to mine, is not a question...
|
|
|
RIGED (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2018, 06:23:33 PM Last edit: February 02, 2018, 06:39:54 PM by RIGED |
|
best token I ever bought is the 300 (no whitepaper, roadmap, no functionality, no bullshit scam promises, just collectible) unwavering support even with all cryptos retreating at this time I am steadily increasing my position until I own 1% of total supply that's 3 tokens as there are and can ever be 300 tokens issued of which Dev team is still hodling 90 of them thus 210 remain in the open market making it impossible to manipulate like shittle sorry ripple and bitcoin
quick math 7.5 billion people in the world 210 tokens available can you say super collectable?
|
to mine or not to mine, is not a question...
|
|
|
abudfv2008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2018, 07:41:33 PM |
|
no sata connection is very bad for powerring risers, it will work some time, but you will probably burn your cables/hardware after some time.
It's only true if you run Vega at 300Watt. With normal 150W consumption 2*8Pin is more than enough and riser power won't be used much.
|
|
|
|
|