HSRMINER Neoscrypt Fork by Justaminer - New Version!

[jagauthier]

ok MR macho
can you explain this picture, why i see fees going to somewhere ?
i fix the diff to 2048 but here i can see diff 256

you haven't explained why did you post fake virustotal report and now you asking me to explain you some screenshot? I don't have much free time for such discussions, if you don't like this miner or have some fears, you are free to use any other neoscrypt miner, there are lot of them.

@Ayman84
I see nothing in this screenshot to indicate anything.. If you want to point something out, mark up your screenshot.

[Just_a_miner]

It's because TitanXP is not supported by original hsrminer for some reason. I will try to fix it with next release.

I'd appreciate that.

Also, as others have indicated previously, I'd be happy to make a percentage donation if you can work out an algorithm.

Thanks

New version released - check here. Hopefully with next release you will be able to use Titan XP 

[Just_a_miner]

I was using Palgin's original HSR Miner for weeks.. It was a pretty good improvement over Klaust CCMiner for neoscrypt. When I was using one 1080 ti card I was getting around 1815kh/s. When I expanded my rig to 8 cards, the hashrate of the combined cards was closer to 1650kh/s. Still better than Klaust CCminer by about 5%. I guess because of multiple cards the efficiency went down.

Then I tried Just A Miner's fork with high intensity, same high OC settings I've always used (90tdp, +120core +600mem)... Combined hashrate for 8 1080 ti cards back up to 14.8mh/s, that gives an individual rate of 1850kh/s. I'm really impressed, and I want to thank you..

I'm glad that you like it, will try to improve it further.

[sir_blacks]

Hello
It seams API is not functional or bugy coz i try to use  -b, --api-bind=port & i recive:
A. The connection was reset or B. Unable to connect

With TCPView app i see port is allocated for hsrminer but nothing is show in browser aka see msg

cheers

[ElMinator]

Lovely miner fork, good job mate.
Do you have any intention to build a telegram bot support for monitor and control?

[Just_a_miner]

Hello
It seams API is not functional or bugy coz i try to use  -b, --api-bind=port & i recive:
A. The connection was reset or B. Unable to connect

With TCPView app i see port is allocated for hsrminer but nothing is show in browser aka see msg

cheers

By default API is enabled for connection from the same host to port 4068, it's same as if you specify -b 127.0.0.1:4068
If you want to connect from different computer, you have to specify -b 0.0.0.0 , then you will be able to connect to YOUR_RIG_IP:4068
When you open API to external ips with -b 0.0.0.0 command, make sure you don't change port - for some reason now only default port 4068 is supported in this case.

If you connect from the same computer you can change port, i.e. -b 127.0.0.1:5555

Okay, now how to connect. As far as I know you can connect from linux with telnet. In windows you have to use tools like Awesome Miner - see how it works for example here. If you are trying to connect from browser using websockets - please show .html you are using, so I will be able to debug it and see what is wrong.

[Just_a_miner]

Lovely miner fork, good job mate.
Do you have any intention to build a telegram bot support for monitor and control?

Thanks. Never thought about that, may be in future. Right now I'm busy adding support for different GPUs.

[Golku]

is it possible to add min diff and max diff ?

[Just_a_miner]

is it possible to add min diff and max diff ?

Explain more please, how should it work?

[Golku]

is it possible to add min diff and max diff ?

Explain more please, how should it work?

I am using a fixed diffucilty at a pool (d=1500) sometimes the miner adjust the diffucilty to a much lower diffucilty and then the pool reject a couple of shares

So if we can force the miner to use a diffucilty from range 1400 - 1600 it wont reject the shares

[Just_a_miner]

is it possible to add min diff and max diff ?

Explain more please, how should it work?

I am using a fixed diffucilty at a pool (d=1500) sometimes the miner adjust the diffucilty to a much lower diffucilty and then the pool reject a couple of shares

So if we can force the miner to use a diffucilty from range 1400 - 1600 it wont reject the shares

I will see what can be done, but it won't be fast as it is quite complex task.

[jugger1028]

You mine at 2048 difficulty? How do you know what difficulty is a good rate for your mining rig?

just make sure that you can submits  5 to 15 shares per minute.

When I look at the pool, it says I have 240s/s, I'm guessing that's 240 shares per second? I mine at 512 difficulty with about 15mh/s rig. Is 512 too low?

That's 240 shares of value 1 per second. So with 512 diff, it's about one share submission every 2 seconds.
Difficulty doesn't matter that much. Let the pool choose it for you.

I can't let the pool choose, it's not a variable difficulty pool. The next option for difficulty is 2048, is that too high for me?

[sir_blacks]

Just_a_miner

now i get it after reading what you was replay "Okay, now how to connect. As far as I know you can connect from linux with telnet." & "If you are trying to connect from browser using websockets - please show .html you are using" what means you was just implement api request not provide let say a default .html to ... it require user to build own html or use telnet, putty (windows, linux) or Remote manager provide by claymore see the EthMan

about awesome miner i not advice to recommend only for appi, putty, telnet (booth work on windows to) is more that inaff ... awesome miner make to much mess, personally i spend to much time clean after i was try to test it ...

for future try to implement a default html to like dstm, bminer, excavator have if you can same say in OP treath description it require a external application like telnet / putty

cheers & thx for clarify this

[Ayman84]

ok MR macho
can you explain this picture, why i see fees going to somewhere ?
i fix the diff to 2048 but here i can see diff 256

you haven't explained why did you post fake virustotal report and now you asking me to explain you some screenshot? I don't have much free time for such discussions, if you don't like this miner or have some fears, you are free to use any other neoscrypt miner, there are lot of them.

ok i can explain, i read the post from beginning and i found this links and if the virustotal in new version didnt find anything its mean nothing. you just encrypt it.
back to subject, you said this fork no fees, and i think you just convert the fees developer to you because the scren shot showing there is some fees going somewhere,  anyway i don't care, take the fees for you just don't add malware and bad files

[Just_a_miner]

for future try to implement a default html to like dstm, bminer, excavator have if you can same say in OP treath description it require a external application like telnet / putty

cheers & thx for clarify this

Ok, I've done some testing, actually you can connect and get results of api commands directly from browser. Firefox 58 was able to display results of api commands.

Try to type in browser address bar:

127.0.0.1:4068/help

[Ayman84]

ok MR macho
can you explain this picture, why i see fees going to somewhere ?
i fix the diff to 2048 but here i can see diff 256

you haven't explained why did you post fake virustotal report and now you asking me to explain you some screenshot? I don't have much free time for such discussions, if you don't like this miner or have some fears, you are free to use any other neoscrypt miner, there are lot of them.

@Ayman84
I see nothing in this screenshot to indicate anything.. If you want to point something out, mark up your screenshot.

he said this fork no fees, i fix my diff with 2048 after one hour the software start sending fees somewhere with 256 diff

[Larvitar]

@Just_a_miner

Great miner! It made my GTX1070 so happy

But... The hashrate is lower than the example in the first post:
Hsrminer_Neoscrypt_Fork with default settings, normal process priority version - 1322 kh/s

mine, with the same settings: 1150KH/s

Even with more power (105% PL / 180 GPU / 400 Memory) I can't reach 1300KH/s, just around 1250KH/s

Maybe this is because my Asus GTX1070 Dual has only 1 8-pin PCI-E power conector, but I just wanna ask: What the OS/driver combo do you are running? Maybe something os cutting my mining performance?

[Just_a_miner]

ok i can explain, i read the post from beginning and i found this links and if the virustotal in new version didnt find anything its mean nothing. you just encrypt it.
back to subject, you said this fork no fees, and i think you just convert the fees developer to you because the scren shot showing there is some fees going somewhere,  anyway i don't care, take the fees for you just don't add malware and bad files

First - it was "encrypted" from the begining. Now some AV on virustotal even marks it as "hsrminer", if it tells you something.
Second - all that your screenshot is showing is that diff was low, then it became higher. I won't be like you and won't accuse you for lying - I can suppose that it's result of some bug in original hsrminer because it certainly have bugs as any software - I've already fixed atleast one of the palgin' bugs in -d option parsing. When I will have more free time I will try to repeat what you have described and hopefully fix this bug if it actually exists.

As for devfee, I will implement --donate option with next release, because several users already asked me about it.

[Just_a_miner]

@Just_a_miner

Great miner! It made my GTX1070 so happy

But... The hashrate is lower than the example in the first post:
Hsrminer_Neoscrypt_Fork with default settings, normal process priority version - 1322 kh/s

mine, with the same settings: 1150KH/s

Even with more power (105% PL / 180 GPU / 400 Memory) I can't reach 1300KH/s, just around 1250KH/s

Maybe this is because my Asus GTX1070 Dual has only 1 8-pin PCI-E power conector, but I just wanna ask: What the OS/driver combo do you are running? Maybe something os cutting my mining performance?

Thanks. Results that you see in the first post achieved with rather powerfull GPU - MSI GTX 1070 Gaming X, it has two 8 and 6 pin power conectors and high core/mem clocks. I have several less powerfull gpus with 1 8pin power connector and lower clocks - they also show 1230-1285 kh/s, so it's okay and depends of gpu manufacturer, "class" and so on.

OS is Windows 10 Anniversary edition with 390.77 Nvidia drivers. I've got same results on Windows 10 ver 1709.

[Larvitar]

@Just_a_miner

Great miner! It made my GTX1070 so happy

But... The hashrate is lower than the example in the first post:
Hsrminer_Neoscrypt_Fork with default settings, normal process priority version - 1322 kh/s

mine, with the same settings: 1150KH/s

Even with more power (105% PL / 180 GPU / 400 Memory) I can't reach 1300KH/s, just around 1250KH/s

Maybe this is because my Asus GTX1070 Dual has only 1 8-pin PCI-E power conector, but I just wanna ask: What the OS/driver combo do you are running? Maybe something os cutting my mining performance?

Thanks. Results that you see in the first post achieved with rather powerfull GPU - MSI GTX 1070 Gaming X, it has two 8 and 6 pin power conectors and high core/mem clocks. I have several less powerfull gpus with 1 8pin power connector and lower clocks - they also show 1230-1285 kh/s, so it's okay and depends of gpu manufacturer, "class" and so on.

OS is Windows 10 Anniversary edition with 390.77 Nvidia drivers. I've got same results on Windows 10 ver 1709.

Fine, I appreciate your explanation! I was worried that i could have something wrong with my beloved card 

I will play with benchmark to find the best hashrate/watt settings, and find the perfect intensity. Do you have a tip for the GTX1060 3GB, just "trial and error", or let the default miner settings and drink a beer?