HSRMINER Neoscrypt Fork by Justaminer - New Version!

[giveen1]

 
~  Added 1 minute per hour devfee.


Enjoy!

I really dont mind paying dev fee's. I'm just amused that this was one of the things you raged about with the original one from plagin.

I do understand that you are actually improving it with your fork. 1.6% dev isn't bad.

This is not correct, first post was like that:

Are you mad at Hsrminer_Neoscrypt because it tries to connect to dead pools for several hours, making your farms waste time and profits?
So am i, because i'm just another miner like you, and i want my rigs to work 24/7!

And here is my solution:

This is fork of Hsrminer for Neoscrypt miner.
....

Main problem that was bothering me was not devfee, but exactly lack of -r option, because of that miner was unreliable. Once I woke up in the morning and checked farm's status - all rigs with hsrminer were chilling, doing nothing because pool was dead for like 4 or 6 hours. That's what make me mad and motivated to solve this problem.

My bad, either way, I dont mind paying once a version comes out that I want to upgrade to that improves performance on my 1060's. Right now I'm on equihash.

[Just_a_miner]

Has anyone tested new version with Titan XP , V , X or GTX 950, 960 gpus?

[The Godfather]

so how much this miner gives on gtx 1070?

[Just_a_miner]

so how much this miner gives on gtx 1070?

Depends on what GTX 1070 you are using. If it's very fast card, i.e. Msi Gtx 1070 Gaming X, the one I was using in benchmark - you can get 1350+ Kh/s even with medium OC setting: 80% PL, +100 core, +400 mem. I'm sure that it can go as high as 1400+ Kh/s if I overclock it to say 100-110% PL,+150-200 core, +500-600 mem.

Medium speed cards like Gigabyte 1070 G1 Gaming can reach 1250-1300 Kh/s.

[andrewpuzoff]

Plz, help!

I have 3 VGAs
How to reduce intencity for one of them?

It needs for other calculations time by time (jminer burstcoin)

[Just_a_miner]

Plz, help!

I have 3 VGAs
How to reduce intencity for one of them?

It needs for other calculations time by time (jminer burstcoin)

Tell me what gpu's are you using so I will be able to tell you correct intensity values.

Then use for example:

hsrminer_neoscrypt_fork -d 0,1,2 -i 7,7,15

In this example GPUS 0 and 1 will use default intensity, and GPU 2 will use intensity 15.

[proteus7]

Running on TitanXP and its working, but performance isn't quite as good as Excavator 1.4.4. The fork_hp version gets 2.05MH/card vs 2.17MH with Excavator (which also has no devfee).
Any settings you'd recommend tweaking?

[The Godfather]

so how much this miner gives on gtx 1070?

Depends on what GTX 1070 you are using. If it's very fast card, i.e. Msi Gtx 1070 Gaming X, the one I was using in benchmark - you can get 1350+ Kh/s even with medium OC setting: 80% PL, +100 core, +400 mem. I'm sure that it can go as high as 1400+ Kh/s if I overclock it to say 100-110% PL,+150-200 core, +500-600 mem.

Medium speed cards like Gigabyte 1070 G1 Gaming can reach 1250-1300 Kh/s.

i have msi gtx 1070 gaming x 8gb but i keep it at max 60% pl and max 65% TL...
core + 100~110 and mem max 600.. and i get it 1150 per card....

but what is max core this card can go.. 150 or 200 is to high.. or not ?

[Just_a_miner]

Running on TitanXP and its working, but performance isn't quite as good as Excavator 1.4.4. The fork_hp version gets 2.05MH/card vs 2.17MH with Excavator (which also has no devfee).
Any settings you'd recommend tweaking?

Thanks for feedback, I just wanted to know if Titan XP works, if you get better result for Titan XP with other miner, of course you can use it.
As for setting - you can try to tweak intensity, set it higher than -i 17.5 with little steps like -i 17.6 and so on.

so how much this miner gives on gtx 1070?

Depends on what GTX 1070 you are using. If it's very fast card, i.e. Msi Gtx 1070 Gaming X, the one I was using in benchmark - you can get 1350+ Kh/s even with medium OC setting: 80% PL, +100 core, +400 mem. I'm sure that it can go as high as 1400+ Kh/s if I overclock it to say 100-110% PL,+150-200 core, +500-600 mem.

Medium speed cards like Gigabyte 1070 G1 Gaming can reach 1250-1300 Kh/s.

i have msi gtx 1070 gaming x 8gb but i keep it at max 60% pl and max 65% TL...
core + 100~110 and mem max 600.. and i get it 1150 per card....

but what is max core this card can go.. 150 or 200 is to high.. or not ?

You can't set low PL and get high hashrate - it's contradictory things. I think trend for low PL was created with ETH mining? But ethhash doesn't require high core clocks, it needs fast memory. Neoscrypt algo requires fast core clocks AND memory. And if you set low PL - core clocks of your GPU also goes down. I've done my benchmark with PL 90%, core clock was around 2025 Mhz and mem clock was at 4200 Mhz - so I got high results.

No point in overclocking to high values if you limit PL too much - can you work long and hard if you don't eat or eat not enough? 

[The Godfather]

yea but to high % of PL means more voltage. That means more heat and msi gaming x is not palit or gainward for cooling...
If you eat to much you will go to bathrom to much, maybe doctor ,, and i dont want to send gpu to service so ofteb

[Just_a_miner]

yea but to high % of PL means more voltage. That means more heat and msi gaming x is not palit or gainward for cooling...
If you eat to much you will go to bathrom to much, maybe doctor ,, and i dont want to send gpu to service so ofteb

Yes, that's why you need to find optimal balance - I don't set PL to 100%, I set it to 80-90%, that way GPU eats 180-190W, temp is 65-69 C and
hashrate is ~1350 Kh/s.

As for cooling, this GPU has rather decent durable coolers. You just need to make sure there is some airflow - some external fan should bring cool air to rig. And something must take away GPU's heat from rig.

[The Godfather]

yea but to high % of PL means more voltage. That means more heat and msi gaming x is not palit or gainward for cooling...
If you eat to much you will go to bathrom to much, maybe doctor ,, and i dont want to send gpu to service so ofteb

Yes, that's why you need to find optimal balance - I don't set PL to 100%, I set it to 80-90%, that way GPU eats 180-190W, temp is 65-69 C and
hashrate is ~1350 Kh/s.

As for cooling, this GPU has rather decent durable coolers. You just need to make sure there is some airflow - some external fan should bring cool air to rig. And something must take away GPU's heat from rig.

wow thats to huge consumption.. my gaming x use 120w and hash is 1150.. with temp 60-64C and fan speed to 45%...
Real question is profit for 60-70w more for aditional 200 kh/s?

120w & 1150kh/s vs. 185w & 1350kh/s

[mielebauknecht]

Current version (3/1) crashes with "unable to start correctly 0xc000007b". Even when started without arguments, with or without arguments does not matter.
Both the 'hp' version and the normal version. Using 1070ti's, not OC-ed. But this does not matter as the app crashes before even looking for cards.
Windows 10, latest updates.

[Just_a_miner]

yea but to high % of PL means more voltage. That means more heat and msi gaming x is not palit or gainward for cooling...
If you eat to much you will go to bathrom to much, maybe doctor ,, and i dont want to send gpu to service so ofteb

Yes, that's why you need to find optimal balance - I don't set PL to 100%, I set it to 80-90%, that way GPU eats 180-190W, temp is 65-69 C and
hashrate is ~1350 Kh/s.

As for cooling, this GPU has rather decent durable coolers. You just need to make sure there is some airflow - some external fan should bring cool air to rig. And something must take away GPU's heat from rig.

wow thats to huge consumption.. my gaming x use 120w and hash is 1150.. with temp 60-64C and fan speed to 45%...
Real question is profit for 60-70w more for aditional 200 kh/s?

120w & 1150kh/s vs. 185w & 1350kh/s

You can calculate profit difference yourself using your electricity price. Usually if electricity is cheap, it's more profitable to have higher hashrate. Anyway, I've anwsered your first question about what hashrate you can get with 1070 and HOW you can get it, so now only you can decide what do you like more - high hashrate or low power usage. You can't get both simultaneously.

[Just_a_miner]

Current version (3/1) crashes with "unable to start correctly 0xc000007b". Even when started without arguments, with or without arguments does not matter.
Both the 'hp' version and the normal version. Using 1070ti's, not OC-ed. But this does not matter as the app crashes before even looking for cards.
Windows 10, latest updates.

I need more info, type winver in cmdline and tell me what windows version it shows - (OS Builds xxxxx.xxx)

BTW, you guys better don't update Windows 10 that often, do you really thinks MS optimize it for mining rigs? All what they are doing is adding another layer of telemetry and some crappy interface tweaks, usually breaking software compatibility along the way. One of my rigs still use W10 Anniversary edition - and it's stable and gives same hashrate as one with newer Win10 Ver 1709 I had to install for debugging crash in old version of the miner.

[das504]

hi, you can add r0 option  for hsrminer for hsr algo?

[Just_a_miner]

hi, you can add r0 option  for hsrminer for hsr algo?

I think it's possible. You guys need hsrminer_hsr_fork now? 

[GeForce1]

just reporting in. The fixes are great! I can now mine on my gaming/mini mining machine.

getting 300KH more! compared to excavator on the 980ti and 980. No OC settings.

https://i.gyazo.com/f1bc8f4b40784c9db6cf369c1194f8e3.png



Thank you for this release and support of the 980's!!

[Just_a_miner]

just reporting in. The fixes are great! I can now mine on my gaming/mini mining machine.

getting 300KH more! compared to excavator on the 980ti and 980. No OC settings.



Thank you for this release and support of the 980's!!

Thanks for the info, I'm glad that you are like it 

[moi162001]

Hello!
Have you ever thought of doing a version for linux?
thanks