[ANN][POW] 👾Torque👾 - decentralized node list via IPFS & ZeroNet

[podrouzek]

Hey Keshsk

Go to the discord channel for that question.  You will get a very quick response there

By the way, this project is great!

[cedricp]

How do you OC AMD for this coin and for CryptoNight in general. I have 470 mining (giving 3.8 KH/s)  570 8gb (3 KH/s) and 580 8gb(3.4 KH/s). What do you suggest?. And one rig with Nvidea 2.3 KH/s ))

For all AMD I OC Core MHz: 1200 and Memory MHz: 1900 but I think they can go better. Using Simplemining OS

Hi,

How many of each card you have ? not 1
its impossible to do 3800H/s with one.
With RX580 4Gb at 1300 core 2000 memory Vcore at 850mV Vmem at 900mV i have 900H/s for each card, and its a good result.

Better to tell your speed by type of 1 card to compare and give you infos.

[miner.rocks]

Hello!

I have an issue mining through the proxy. I'm using updated xmr-node-proxy and it works with monero, but doesn't want to work with XTL. If I'm running one of my rigs directly it also works. But using xmr-stak + xmr-node-proxy give me "low difficulty share" error from the pool.
Any guess why and what I should tweak on the proxy side?

It could be that proxy does not support XTL, or pool does not support updated proxy.
Please give more info - link to github with proxy, and which pool you are trying to use?

[miner.rocks]

All my share rejected using simple miner on https://stellite.miner.rocks/ can anyone help?

http://prntscr.com/j3aydr

Hi,

Please post your config file for help.

this is my pool setting in simpleminer
http://prntscr.com/j3bfdf

Hi, it can be that simpleminer is outdated, and has non-updated xmrig with it.
Please give a try to supported miners from the https://stellite.miner.rocks/#getting_started.

[ivellious]

Hmm trying to launch gui wallet on all my notebooks, its wont launch anywhere, have no idea why... 

[SpceGhst]

What is the port to solo mine this coin?

There are several pools listed in post #1 that have no miners on them.  Join one and you’re basically solo mining...

[linkdefeu]

Stellite in on CMC !!!!
https://coinmarketcap.com/currencies/stellite/#markets
 

[ArkadiyDeliev]

What is the port to solo mine this coin?

There are several pools listed in post #1 that have no miners on them.  Join one and you’re basically solo mining...

I shall clean some of those. Many probably haven't even upgraded to the CryptoNightV7 daemon. Thanks for mentioning!

[shuxin9]

Stellite 1.00 version of the synchronous binary purse not, how to solve?

[bobes]

Hi, help to understand, my cli wallet is not synchronized with the network, stopped on the block 100808 can I import it into the GUI purse with the remaining balance or how can I solve the issue with synchronization? I tried to remove the entire block and synchronize it first, but nothing happened.

[Call_Me_Bambi]

How do you OC AMD for this coin and for CryptoNight in general. I have 470 mining (giving 3.8 KH/s)  570 8gb (3 KH/s) and 580 8gb(3.4 KH/s). What do you suggest?. And one rig with Nvidea 2.3 KH/s ))

For all AMD I OC Core MHz: 1200 and Memory MHz: 1900 but I think they can go better. Using Simplemining OS

WOW! 3800 h/s on a RX 470, I gotta get me some of them cards. I've a bit of a worn out RX470 4GB and it only gets around 850 h/s (with a bit of overclocking).

[cedricp]

How do you OC AMD for this coin and for CryptoNight in general. I have 470 mining (giving 3.8 KH/s)  570 8gb (3 KH/s) and 580 8gb(3.4 KH/s). What do you suggest?. And one rig with Nvidea 2.3 KH/s ))

For all AMD I OC Core MHz: 1200 and Memory MHz: 1900 but I think they can go better. Using Simplemining OS

WOW! 3800 h/s on a RX 470, I gotta get me some of them cards. I've a bit of a worn out RX470 4GB and it only gets around 850 h/s (with a bit of overclocking).

No, its for his complete rig, not 1 card, rx470 can from 700 stock to 1050 H/s.   only if you are mining CryptoNightLite V1 like Turtle where you have the hashrate X2 but to compare with CryptoNight you need to divide by 2.

[cedricp]

Hi, help to understand, my cli wallet is not synchronized with the network, stopped on the block 100808 can I import it into the GUI purse with the remaining balance or how can I solve the issue with synchronization? I tried to remove the entire block and synchronize it first, but nothing happened.

Hi,

You need to restore your wallet via the seed that was given when the wallet was created and sync it from block height 0.
To do so, delete all files in C:\ProgramData\stellite.

in the CLI Wallet folder, create a .bat file and place following commands in it:

Code:

stellite-wallet-cli.exe --restore-deterministic-wallet

save and start the .bat file.

It will ask you to name your restored wallet, set a new password and type in the seed key of 25 words.

When launching simple wallet afterwards, it will receive blocks and your balance will be shown.

Now you have a new wallet syncked from block 0 and can continue with CLI Wallet or open it in GUI Wallet.

[powemando]

Please try this one and tell me :

Code:

"gpu_threads_conf" :
 * [
 *   { "index" : 0, "intensity" : 868, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : true, "mem_chunk" : 2, "comp_mode" : true },
 * ],
 * If you do not wish to mine with your AMD GPU(s) then use:
 * "gpu_threads_conf" :
 * null,
 */

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 0,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  { "index" : 0,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 1,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  { "index" : 1,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 2,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  { "index" : 2,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 3,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  { "index" : 3,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 4,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  { "index" : 4,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 5,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  { "index" : 5,
    "intensity" : 868, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
 
],

/*
 * Platform index. This will be 0 unless you have different OpenCL platform - eg. AMD and Intel.
 */
"platform_index" : 1,

Thank you Cedric, i did your configuration and now all 12 GPU threads are working. I had just to rise intensity a bit to work at maximum hashrate. Thank you again

[cedricp]

Thank you Cedric, i did your configuration and now all 12 GPU threads are working. I had just to rise intensity a bit to work at maximum hashrate. Thank you again

For nothing, glad to help you.

Try to up "intensity" on 1 card only step by step, +8, mine for 1 minute and check the hashrate.
When your hashrate start to down, down the result of 8 to make it stable.
Apply your results to all card and VOILA.  

If you overclock your card, don't forget one think, when you mining cryptonight, core clock is much more important than ETH.
With CClock 1100 CMem 2000 i have 900H/s but with CClock 1300 CMem 2000 i have 1050H/s

[tbearhere]

Price settling for now at 20 sats 

It should be closer to 40 sats or higher...IMO. 

[paderobin]

Stellite in on CMC !!!!
https://coinmarketcap.com/currencies/stellite/#markets
 

The climb is on. First step taken, now unto bigger and better things. Also looks like Tradeogre has more volume than Crex24. Think it's time to give that exchange a second look

[tbearhere]

can i send stellite in wallet GUI but synchronizing still 27% sir ?

No.......wait for your wallet to sync....else coins maybe lost.

[al7878]

hey guys,
Can someone tell me how to be listed on tradeogre please?
Do you have any contact ?

Thanks

[shuxin9]

 Hello! purse not synchronous, stillte. Exe on such shows:
 INFO    global  src/cryptonote_protocol/cryptonote_protocol_handler.inl:302     [89.177.121.94:20188 OUT] Sync data returned a new top block candidate: 67598 -> 110946 [Your node is 43348 blocks (30 days) behind]