onestig (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/question.gif) |
January 27, 2018, 12:51:41 PM |
|
Hi,
i have problem with my gpu. I flashed bios from anorak.tech for rx 570 nitro+ 8gb micron, and getting blue screen. So, i switched bios to "silent" position, and into windows put it back to original position and flash with original bios. But still getting blue screen(with original bios!) I tried different drivers, different versions of bios from internet etc. 2gpu's now totally bricked (both bioses), 6gpu's bricked on default side of bios switch.
Please help :/
|
|
|
|
[YAZ]
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 208
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 01:13:07 PM |
|
Patch your pixel clock and refresh rate using atikmdag patcher, it will also handling driver signature. Since 64-bit versions of Windows include a “driver signature enforcement” feature, so the system will only load drivers that have been signed by Microsoft. Also, use your own modded bios, it's safer.
|
|
|
|
onestig (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 03:20:54 PM |
|
Hi, of course i used AMD/ATI Pixel Clock Patcher with modded bios. When i use it with modded bios pc crashing after patch. With original bios crashing instantly after driver install. Also tried on simplemining, crashing.
I am in mining about 2 years, i have +- 50 gpu, all with good bioses and without problems, this is my first problem.
|
|
|
|
[YAZ]
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 208
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 04:05:56 PM |
|
I am in mining about 2 years, i have +- 50 gpu, all with good bioses and without problems, this is my first problem.
Yeah, the ways you mod your cards didn't show that you are two years in mining, no offense. C'mon man, two years with +- 50 cards it's enough to mod your cards by yourself, but you didn't.
|
|
|
|
Branko
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 04:35:11 PM |
|
I am in mining about 2 years, i have +- 50 gpu, all with good bioses and without problems, this is my first problem.
Yeah, the ways you mod your cards didn't show that you are two years in mining, no offense. C'mon man, two years with +- 50 cards it's enough to mod your cards by yourself, but you didn't. Exactly my thoughts ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Its never good idea to use bios-es from net, because theres so many versions and revisions of the same card...back when I was selling bios-es I always modified original ones, even if I did "same" card before
|
|
|
|
onestig (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 04:35:47 PM |
|
Yes, you are right. I can mod hynix, samsung and elpida. But nope fu***** micron
|
|
|
|
Mattthev
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 05:23:36 PM |
|
Yes, you are right. I can mod hynix, samsung and elpida. But nope fu***** micron Why not? https://bitcointalk.org/index.php?topic=1954245.0If you haven't reinstalled drivers after flash that's probably the problem. Use DDU... you can easily just follow my guide.
|
|
|
|
xxcsu
|
![](https://bitcointalk.org/Themes/custom1/images/post/exclamation.gif) |
January 27, 2018, 05:52:04 PM |
|
I am in mining about 2 years, i have +- 50 gpu, all with good bioses and without problems, this is my first problem.
Total BSYou mining for two years ... 50+ cards ... and you downloading bios from the internet and flashing that to your cards ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) REALLY ?? And you wondering why your cards bricked ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Yes, you are right. I can mod hynix, samsung and elpida. But nope fu***** micron You can mod your bios easy with SRBPolaris Bios Editorjust done a few bios mod for a few cards w micron mem yesterday ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) fired up the rig and still running stable , not even a single restart or hang on open cl ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fbeszeljukmeg.com%2FETH%2Frx580micron.JPG&t=665&c=BX33C6XDtldorA) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fbeszeljukmeg.com%2FETH%2Frx580build.jpg&t=665&c=Cq841JlmFoJatg) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fbeszeljukmeg.com%2FETH%2Frx580build2.jpg&t=665&c=FiDkirPXu-AVvg)
|
|
|
|
[YAZ]
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 208
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 06:05:46 PM |
|
So, you are trying to show me that you are running a lot off the card on one rig without issue? Just Kidding LoL. Glad to see you here, since on other thread we are on different sides. I also mod Polor Rx 580 with micron a few days ago and running smoothly.
|
|
|
|
xxcsu
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 06:21:39 PM |
|
So, you are trying to show me that you are running a lot off the card on one rig without issue? Just Kidding LoL. Glad to see you here, since on other thread we are on different sides. I also mod Polor Rx 580 with micron a few days ago and running smoothly.
Running 8 cards only right now for a "stress test" for 48 hours in that rig ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) want to make sure its stable ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The total system draw 980Watts (240Volt) at the wall with 8 cards hashing ... Just modded 8 of Sapphire Radeon NITRO+ RX 580 8GB SPECIAL EDITION bioses , the 8 cards arrived with 4 different bioses , and 3 different kind of mem .. I got samsung , Hynix , micron memory with those cards ... Modded the bios for each cards , fine tuned each cards separately in my pc , saved the fine tuned numbers for each cards, placed the cards into the new frame , applied the fine tune numbers for each cards with OverDrivenTool in the mining rig setup , fired up the rig once ..started the miner program ... rig running stable in the past 34 hours , no restart ,no hang on open cl ... Modding the Micron mem cards , and find the right timing was the easiest ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) One card with Hynix and Samsung mem was the hardest ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) that card running a little bit slower than the another ones ... but stable and still hashing over 30MH/s ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) - first card / first number on this screenshot : ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fbeszeljukmeg.com%2FETH%2Frx580hash34hours.JPG&t=665&c=QXMZaJnUa61nOg)
|
|
|
|
[YAZ]
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 208
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 06:31:39 PM |
|
Running 8 cards only right now for a "stress test" for 48 hours in that rig ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) want to make sure its stable ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The total system draw 980Watts (240Volt) at the wall with 8 cards hashing ... Yeah, you good on it. Even when we debate, I get much input from it. Keep rocking! ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) .Now waiting for an update from OP ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|
onestig (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 07:11:56 PM |
|
I just wanted to say that I am in mining for two years, for faster help procces, for leave out questions like "do you have correctly connected risers?" etc.
My problem is that i getting bluescreen with ORIGINAL BIOS now, after flash with wrong bios. Also GPU-Z says 0mb memory, simplemining says 238mb gpu memory. Reason why i downloaded modded bios from internet was that i can't get more than 26.2mhs from card with simple timing mod for micron on this card. With elpida and hynix on other cards i getting about 29.4-30.2 mhs with timing mod.
So i need some tip or trick why i am getting bluescreen and 0mb memory with original bios now, after previous bad flash. that's all.
|
|
|
|
xxcsu
|
![](https://bitcointalk.org/Themes/custom1/images/post/lamp.gif) |
January 27, 2018, 07:38:15 PM |
|
So i need some tip or trick why i am getting bluescreen and 0mb memory with original bios now, after previous bad flash. that's all.
1 - you might killed your card already with a bad bios flash ... Its need only a few second to power up your cards with bad bios flashed into it ,if that bios apply crazy voltage settings for your mem controller or any voltage regulator on your card or any voltage sensitive parts on your cards ... 2 - Your windows registry might have some left over tune settings , so you need to use the lates DDU to remove the drivers , tune settings ... then unplug your cards , plug in only one card and install the latest amd driver or a blockchain driver dated aug 23th3- did you saved the bios for each cards you have ? Like Card1-Bios1 , Card2-Bios2 , Card3-Bios3 , Card4-Bios4.... ? Your cards from the same manufacturer , might have different bios versions numbers ( see my earlier post about this ), you can not interchange those bios files and flash to another cards ... 4 - What error msg can you see under windows device manager ? Im sure you can see a yellow triangle front of those cards ... 5- did you tried your cards on a different computer ?
|
|
|
|
onestig (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 08:37:32 PM |
|
So i need some tip or trick why i am getting bluescreen and 0mb memory with original bios now, after previous bad flash. that's all.
1 - you might killed your card already with a bad bios flash ... Its need only a few second to power up your cards with bad bios flashed into it ,if that bios apply crazy voltage settings for your mem controller or any voltage regulator on your card or any voltage sensitive parts on your cards ... 2 - Your windows registry might have some left over tune settings , so you need to use the lates DDU to remove the drivers , tune settings ... then unplug your cards , plug in only one card and install the latest amd driver or a pute-Release-Notes.aspx]blockchain driver dated aug 23th3- did you saved the bios for each cards you have ? Like Card1-Bios1 , Card2-Bios2 , Card3-Bios3 , Card4-Bios4.... ? Your cards from the same manufacturer , might have different bios versions numbers ( see my earlier post about this ), you can not interchange those bios files and flash to another cards ... 4 - What error msg can you see under windows device manager ? Im sure you can see a yellow triangle front of those cards ... 5- did you tried your cards on a different computer ? Thanks for reply. 1 - I am 100% sure cards aren't dead. How i said. I have 8 cards - six of them working on silent position with original silent position bios. - two of them are dead on both bios sides. 2 - Already tried DDU, also tried cards on linux (SMOS). When i installing driver again on 90% +- of progress i am geting bluescreen (with original bios). - with modded bios i am not getting blue screen in driver instalation, but after amd pixel clock patcher yes. 3 - Nop ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I just make sure all cards are with micron memory before flashing :/ 4 - I can't go into device manager, getting instant blue screen after windows start logo ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) (I can go to device manager just without gpu driver) 5 - Yes, i tried cards on different computer with same problem after driver install.
|
|
|
|
Dragstar
Newbie
Offline
Activity: 77
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 09:21:43 PM |
|
i have the same situation with my 2x nitro 570 8gb with micron memory.I cant use any modded bios. i have tried all possible solutions except modding my own bios but i am too lazy to do that....
|
|
|
|
[YAZ]
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 208
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2018, 01:22:44 AM |
|
i have the same situation with my 2x nitro 570 8gb with micron memory.I cant use any modded bios. i have tried all possible solutions except modding my own bios but i am too lazy to do that....
"I can't use any modded bios" it means you didn't mod it by your self? sorry, if am wrong. If you mod it by your self, let us know which strap you change, which PBE you are using?
|
|
|
|
|