[ANN] ARGO - Masternodes | Skein | PoW | Microtransaction | ZeroCoin Protocol

[jackal100500]

I have miner ccminer/krnlx-xevan
6x1070. 500-540 MH/s
cc +50
mc -300

[2018-02-05 22:40:14] GPU#2:GeForce GTX 1070, 537.17MH/s
[2018-02-05 22:40:14] GPU#2:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:14] GPU#2:GeForce GTX 1070, 64C(F:64%) 2035/3748MHz(169W)
[2018-02-05 22:40:14] GPU#4:GeForce GTX 1070, 535.01MH/s
[2018-02-05 22:40:14] GPU#4:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:14] GPU#4:GeForce GTX 1070, 63C(F:60%) 2026/3748MHz(168W)
[2018-02-05 22:40:15] GPU#3:GeForce GTX 1070, 540.84MH/s
[2018-02-05 22:40:16] GPU#3:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:16] GPU#3:GeForce GTX 1070, 66C(F:67%) 2050/3748MHz(169W)
[2018-02-05 22:40:17] GPU#1:GeForce GTX 1070, 499.10MH/s
[2018-02-05 22:40:17] GPU#1:GeForce GTX 1070, 3.3MH/W, 0.26MH/Mhz
[2018-02-05 22:40:17] GPU#1:GeForce GTX 1070, 57C(F:49%) 1903/3499MHz(150W)
[2018-02-05 22:40:24] GPU#5:GeForce GTX 1070, 544.01MH/s
[2018-02-05 22:40:24] GPU#5:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:24] GPU#5:GeForce GTX 1070, 61C(F:57%) 2058/3748MHz(169W)
[2018-02-05 22:40:24] GPU#0:GeForce GTX 1070, 539.24MH/s
[2018-02-05 22:40:24] GPU#0:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:24] GPU#0:GeForce GTX 1070, 63C(F:63%) 2050/3748MHz(167W)

[mkasisd]

starting to feel a bit frustrated with my 1080ti results.
So here's the setup:

ccminer alexis78_cuda9 on protopool

-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05

gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3,  631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s

Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320

If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.

Any inputs?

Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/

lol)

ccminer -a skein -o stratum+tcp://pool.bsod.pw:2134 -u wallet -i 28 -p x -R 5
pl85, cc+100, mc 0

5*inno3d 1080ti,

GPU#0:GeForce GTX 1080 Ti, 952.49MH/s
[2018-02-05 21:46:30] [S/A/T]: 0/260/260, diff: 986.974, 4754.66MH/s yes!
[2018-02-05 21:46:38] [S/A/T]: 0/261/261, diff: 12.752, 4754.83MH/s yes!
[2018-02-05 21:46:41] [S/A/T]: 0/262/262, diff: 26.515, 4754.84MH/s yes!
[2018-02-05 21:46:45] [S/A/T]: 0/263/263, diff: 10.118, 4755.53MH/s yes!
temp 64 degrees

[Rican]

starting to feel a bit frustrated with my 1080ti results.
So here's the setup:

ccminer alexis78_cuda9 on protopool

-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05

gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3,  631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s

Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320

If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.

Any inputs?

Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/

lol)

ccminer -a skein -o stratum+tcp://pool.bsod.pw:2134 -u wallet -i 28 -p x -R 5
pl85, cc+100, mc 0

5*inno3d 1080ti,

GPU#0:GeForce GTX 1080 Ti, 952.49MH/s
[2018-02-05 21:46:30] [S/A/T]: 0/260/260, diff: 986.974, 4754.66MH/s yes!
[2018-02-05 21:46:38] [S/A/T]: 0/261/261, diff: 12.752, 4754.83MH/s yes!
[2018-02-05 21:46:41] [S/A/T]: 0/262/262, diff: 26.515, 4754.84MH/s yes!
[2018-02-05 21:46:45] [S/A/T]: 0/263/263, diff: 10.118, 4755.53MH/s yes!
temp 64 degrees

geez I'm robbing myself!  I looked around and found xevan palgin's exe on github, but when put together with the bat file it fails to start.  Got a good source for the windows 10 miner?

[Mineralkin]

i`m use for win 10 xevan,flight it`s very good, one 1080ti give 1000+ mhm PROTOPOOL wallet i28 and i`ts all not enough

[NateDogg187]

starting to feel a bit frustrated with my 1080ti results.
So here's the setup:

ccminer alexis78_cuda9 on protopool

-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05

gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3,  631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s

Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320

If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.

Any inputs?

Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/

lol)

ccminer -a skein -o stratum+tcp://pool.bsod.pw:2134 -u wallet -i 28 -p x -R 5
pl85, cc+100, mc 0

5*inno3d 1080ti,

GPU#0:GeForce GTX 1080 Ti, 952.49MH/s
[2018-02-05 21:46:30] [S/A/T]: 0/260/260, diff: 986.974, 4754.66MH/s yes!
[2018-02-05 21:46:38] [S/A/T]: 0/261/261, diff: 12.752, 4754.83MH/s yes!
[2018-02-05 21:46:41] [S/A/T]: 0/262/262, diff: 26.515, 4754.84MH/s yes!
[2018-02-05 21:46:45] [S/A/T]: 0/263/263, diff: 10.118, 4755.53MH/s yes!
temp 64 degrees

geez I'm robbing myself!  I looked around and found xevan palgin's exe on github, but when put together with the bat file it fails to start.  Got a good source for the windows 10 miner?

how close to your power limit are you? like what kind of power source are you using? if you are using a 1300 watt psu, you will not have enough power to run 5 1080ti at stock clocks (about 250w each), especially if you are running your pc off the same power source. you would be lucky to run 5 1080ti on a 1300w psu even if it were a slave psu or running in a board like the b250 mining expert without undervolting or lowering the power limit on the cards to about 80-90%. at 110% power level you will be lucky to run them even on a 1600w power source. (275x6=1500watts)Just my guess to your problem.

Edit: I cant think of a psu that will run 5 1080ti because of the 8+6pin requirement. the evga 1600w psu only has 9 power cables, seasonic 1300w has 7 ( 8 ) , and ax1600i also has 9(10) unless you are running as a slave psu, then you wont need 1 wire for cpu, making 5 1080ti possible

[jayntguru]

starting to feel a bit frustrated with my 1080ti results.
So here's the setup:

ccminer alexis78_cuda9 on protopool

-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05

gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3,  631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s

Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320

If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.

Any inputs?

Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/

Check the bench section. Totally doable, and these are not the latest results either.

https://protopool.net/bench?algo=skein&chip=5

IMO your PL is way high. Start ~ 90% (or less).

[gprusiyski]

i`m use for win 10 xevan,flight it`s very good, one 1080ti give 1000+ mhm PROTOPOOL wallet i28 and i`ts all not enough

Can you share download link for miner ?

[Rican]

starting to feel a bit frustrated with my 1080ti results.
So here's the setup:

ccminer alexis78_cuda9 on protopool

-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05

gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3,  631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s

Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320

If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.

Any inputs?

Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/

lol)

ccminer -a skein -o stratum+tcp://pool.bsod.pw:2134 -u wallet -i 28 -p x -R 5
pl85, cc+100, mc 0

5*inno3d 1080ti,

GPU#0:GeForce GTX 1080 Ti, 952.49MH/s
[2018-02-05 21:46:30] [S/A/T]: 0/260/260, diff: 986.974, 4754.66MH/s yes!
[2018-02-05 21:46:38] [S/A/T]: 0/261/261, diff: 12.752, 4754.83MH/s yes!
[2018-02-05 21:46:41] [S/A/T]: 0/262/262, diff: 26.515, 4754.84MH/s yes!
[2018-02-05 21:46:45] [S/A/T]: 0/263/263, diff: 10.118, 4755.53MH/s yes!
temp 64 degrees

geez I'm robbing myself!  I looked around and found xevan palgin's exe on github, but when put together with the bat file it fails to start.  Got a good source for the windows 10 miner?

how close to your power limit are you? like what kind of power source are you using? if you are using a 1300 watt psu, you will not have enough power to run 5 1080ti at stock clocks (about 250w each), especially if you are running your pc off the same power source. you would be lucky to run 5 1080ti on a 1300w psu even if it were a slave psu or running in a board like the b250 mining expert without undervolting or lowering the power limit on the cards to about 80-90%. at 110% power level you will be lucky to run them even on a 1600w power source. (275x6=1500watts)Just my guess to your problem.

Edit: I cant think of a psu that will run 5 1080ti because of the 8+6pin requirement. the evga 1600w psu only has 9 power cables, seasonic 1300w has 7 ( 8 ) , and ax1600i also has 9(10) unless you are running as a slave psu, then you wont need 1 wire for cpu, making 5 1080ti possible

Normally I never run higher that 100%, but given the shut downs I though it was power related and never dialed it back, I sure will now. Currently running them on a Tokamak 1500 pulling between 1150 to 1200 at the wall and 10 amps of usage. This has been one of the most power consuming algos I've done so far and mostly for not being able to recognize how it really worked.

Thanks for the heads up though.

[ilkay1212]

Hello guys, i am seeing in the comments that a 180ti should get atleas 1000mh/s. Mine are getting around 820 mh/s.
How can i get to 1000MH/s ?

What are your GPU settings and miner? Try increasing the intensity manually. You can do so by adding -i <number>

First try -i 21 then increase it by one and find the best intensity for your GPU. I have mine at -i 25 and get 950 mh/s

It was a problem with the miner. Now i get 960-970MH/s per card. I downloaded this miner - http://cryptomining-blog.com/wp-content/download/ccminer_alexis_keccak.zip .
I started to mine with two 1080ti (1920MH/s) 0.446724 coins per hour . I started to look around for other currencies to mine in the near future.

What is your opinion on the price ... do you think it will rise. I am wondering if i should sell on 0.00021-22.

bat files ?  i get - 950 mhs per card 6x 1080 ti evga - pool shares 3.2 why ? and low shares

[ilkay1212]

how to manuelly skein algo stratum diff 32 ?

[testz]

how to manuelly skein algo stratum diff 32 ?

Depend from pool, but most of the pools accept as a password -d=32:

For example:

Code:

ccminer -a skein -o stratum+tcp://pool.bsod.pw:<PORT> -u <WALLET_ADDRESS> -p c=ARGO,d=32

[sadk3005]

I have 970mhs on palit super jetstream 1080ti 85pl  +100mhz core
alexis78 miner

[BenchZowner]

Might do a benchmark run with 2 cards ( 1080 Ti, 1070 ) with all available miners for this coin so we can have a concrete answer regarding which software is the best to mine ARGO with.

[maggari]

Was it possible to use AMD products for mining this? And what about hashrates?  

I was going to use some R9 Nanos.


SGMiner or which to use for Skein?

[bonosurgut]

Was it possible to use AMD products for mining this? And what about hashrates?  

I was going to use some R9 Nanos.


SGMiner or which to use for Skein?

cgminer-skein, get 200Mh on R9 290

[crd007]

Was it possible to use AMD products for mining this? And what about hashrates?  

I was going to use some R9 Nanos.


SGMiner or which to use for Skein?

Skein is a Nvidia algo. You have no chance to compete aggainst the 1080ti rigs.
You should go mine some ETHash or Cryptonight coins with AMD .. sad but true

[papitosz]

if i set the diff to 38 what will change?

[ArgoCoin]

Romanian, Japanese, German, Indian - PM Discord!

[mkasisd]

if i set the diff to 38 what will change?

try and tell us =)

[Vegas13]

How much is Argo?