[Block Erupter Blade (New Model)]Low Price, Limited Quantity

[dairy100]

supposedly asicminer has a new cube product coming out too

[xzempt]

Anyone interested in an open-air case for ASICminer blades?

Each blade is secured to the tray via a custom plastic bracket.  The beam that the brackets and fans are attached to could be mounted on the opposite side.

Any comments/suggestions?

p.s. Does anyone have an accurate drawing of the backplane mounting holes?

I'm glad to see that you are thinking about doing this!  But any case I'd use would need to accommodate the HP server PSU mounted on the end of the backplane.  Your design doesn't seem to allow for it.  The PSU is tall and top heavy and needs something to hold in place so it doesn't wobble too much if you breath too hard in the general direction.

Yep, the final product will have support for the PSU.  

All I need to know is by how much the PSU overhangs the backplane and the dimensions of the PSU itself (in millimeters, please).  

I dont have a tape measure that shows millimeters,   according to my set up,  the power supply hangs off the backplane by 11/16th of an inch...


http://t.co/aRDecAPjOw 

[dogie]

Anyone interested in an open-air case for ASICminer blades?

Each blade is secured to the tray via a custom plastic bracket.  The beam that the brackets and fans are attached to could be mounted on the opposite side.
Any comments/suggestions?

p.s. Does anyone have an accurate drawing of the backplane mounting holes?

3x120mm won't be able to remove 800W of heat, those blades will be way too hot. I've had something similar in this config, it doesn't work with 120mms.

[pdawg]

I'm planning for 6 200mm fans 3 push/ 3 pull

[Spotswood]

I'm planning for 6 200mm fans 3 push/ 3 pull

There is only enough room for 4x 200m fans in push/pull.

[pdawg]

Well make me one that is slightly wider 

[sidehack]

I recommend the 120mm case fans from Dell Optiplex mid-towers. Those things at full speed will gladly remove chunks of flesh from fingers, you can feel the wind off them from across the room, and I can attest that they'll deal with moving at least 300W of heat each. Freaking loud though. Ten bucks on eBay.

[Exidous]

Are the blades still for sale? how much are they?

[sidehack]

Check in Group Buys and see if there are any resellers in your part of the world that still have stock.

[lordzav]

Hi guys... When the new model comes out? And how will it be?

I have a small budget so this is the best option for me.

Cups.