[ANN][LCC] Litecoin Cash | SHA256 LTC fork @ block 1371111 | 10:1 claim ratio

[mark299]

My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

The last two lines in my log are below

2018-02-26 12:13:34 29 addresses found from DNS seeds
2018-02-26 12:13:34 dnsseed thread exit

Any help would be appreciated.

[g.m.tyshenk]

My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

The last two lines in my log are below

2018-02-26 12:13:34 29 addresses found from DNS seeds
2018-02-26 12:13:34 dnsseed thread exit

Any help would be appreciated.

This was discussed earlier. See pages 45 and 46 of this thread.

Edit your .conf file in notepad. Add:

addnode=91.128.161.204
addnode=73.232.159.131
addnode=69.123.49.160
addnode=178.200.236.205
addnode=66.69.246.134
addnode=192.30.85.23
addnode=37.14.134.175
addnode=195.68.203.237
addnode=189.216.159.2
addnode=209.205.125.118
addnode=76.97.160.198
addnode=71.197.52.238

[minernoob1]

the cryprobridge exchange is down? any news?

I do not expect any news until Yobit LCC price slowly decrease from about $5 to $0.5. Time for Yobit (with the help of is bot) to make money by scalping naive people : arbitrage rules the trading world, everywhere. It will take weeks, and then they'll open the gate for deposit. And other little exchange (little by volume) like Cryptopia or C-CEX will add this new altcoin to their list.

This is same as how it happen with Bitcoingold. I do not remember the exact numbers, but BTG was trading way higher there than anywhere else for days until they finally open deposits and price leveled out.

[mark299]

My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

The last two lines in my log are below

2018-02-26 12:13:34 29 addresses found from DNS seeds
2018-02-26 12:13:34 dnsseed thread exit

Any help would be appreciated.

This was discussed earlier. See pages 45 and 46 of this thread.

Edit your .conf file in notepad. Add:

addnode=91.128.161.204
addnode=73.232.159.131
addnode=69.123.49.160
addnode=178.200.236.205
addnode=66.69.246.134
addnode=192.30.85.23
addnode=37.14.134.175
addnode=195.68.203.237
addnode=189.216.159.2
addnode=209.205.125.118
addnode=76.97.160.198
addnode=71.197.52.238

Thanks for the response, but where is the .conf file? I dont see any conf file? Should i create one and what is the name?

[g.m.tyshenk]

My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

The last two lines in my log are below

2018-02-26 12:13:34 29 addresses found from DNS seeds
2018-02-26 12:13:34 dnsseed thread exit

Any help would be appreciated.

I found the easiest way to sync my LCC wallet was to download the 8.5 GB bootstrap.DAT  file from the LCC website,  https://litecoinca.sh/ .  

The torrent downloaded within 15 minutes.

Unzip and extract the  bootstrap.dat into your LCC data directory.

For Windows users, the default data directory is: C:\Users\YOUR-USER-NAME\AppData\Roaming\LitecoinCash.

For Mac Users, the default directory is:  ~/Library/Application Support/litecoincash.

Restart your LCC wallet.  It will start syncing in a few minutes.  It took 2.5 hours for the sync to complete on my sad slow laptop. .
You can delete the bootstrap.dat file after you are completely sync'd (I just  left the bootstrap.dat file ).

Now sync'd you will be able to claim your LCC.

Good luck! Hope this helps.

[BtcVolcano]

Probably it will be necessary to get acquainted with it in more detail as I have a few coins. Here many forks divorced, do not even manage to watch everything. And the coin most likely will cost very much soon, I think nevertheless it though some alternative and distribution of a portfolio.

[mark299]

UPDATE

I have entered that on conf file from options

Now i get this in the log

2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
2018-02-26 12:36:05 GUI:   OpenType support missing for script 17
2018-02-26 12:36:05 GUI:   OpenType support missing for script 17
2018-02-26 12:36:05 GUI:   OpenType support missing for script 17
2018-02-26 12:36:10 Loading addresses from DNS seeds (could take a while)
2018-02-26 12:36:10 29 addresses found from DNS seeds
2018-02-26 12:36:10 dnsseed thread exit

And again just stuck at progress 0.0%

[g.m.tyshenk]

My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

The last two lines in my log are below

2018-02-26 12:13:34 29 addresses found from DNS seeds
2018-02-26 12:13:34 dnsseed thread exit

Any help would be appreciated.

This was discussed earlier. See pages 45 and 46 of this thread.

Edit your .conf file in notepad. Add:

addnode=91.128.161.204
addnode=73.232.159.131
addnode=69.123.49.160
addnode=178.200.236.205
addnode=66.69.246.134
addnode=192.30.85.23
addnode=37.14.134.175
addnode=195.68.203.237
addnode=189.216.159.2
addnode=209.205.125.118
addnode=76.97.160.198
addnode=71.197.52.238

Thanks for the response, but where is the .conf file? I dont see any conf file? Should i create one and what is the name?

For the .conf file:   

For Macs

1.  Make a file (using notepad) called litecoincash.conf in the /Users/yourusername/Library/Application Support/ folder.

2. Add the  nodes I listed previously to the .conf file and save it.


For Windows

1. Make a file (using notepad) called litecoincash.conf in the /Users/yourusername/AppData/Roaming/LitecoinCash folder.


2. Add the nodes to the .conf file and save it.

Good luck!   

[mark299]

If i want to do the download .dat file option. where do i put this file? I am not able to find /user/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

[g.m.tyshenk]

UPDATE

I have entered that on conf file from options

Now i get this in the log

2018-02-26 12:36:05 GUI:   OpenType support missing for script 12

{{SNIP}}

And again just stuck at progress 0.0%

The best advice I can give is to add the nodes to the .conf file.
And
Download the bootstrap.DAT zip file.

If you are syncing using the wallet only to update then your LCC  wallet will need to download ~16 GB of bootstrap data. Downloading this size of file data is slow using the wallet!

This will take several hours or longer (days) to compete.

I found using the bootstrap.dat  sped up the process and syncd my wallet in a few hours, as opposed to a several hours-days of syncing

[g.m.tyshenk]

If i want to do the download .dat file option. where do i put this file? I am not able to find /user/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

I am using windows 7 so I can only speak to this OS (if you are using Win 8, 10 the directory path might be slightly different)

You have installed the wallet executable to your G:/ drive.

If your are using windows go to your root  C:/Users/"your user name"/AppData/Roaming/LitecoinCash folder.

Unzip and put the bootstrap.dat file (8.5 GB) there.

It is the same directory where you should have the newly created litecoincash.conf file (with nodes added).

The (roaming) directory path may be hidden so check your folder attributes to -unhide if you can't see the path.

Restart your LCC wallet and wait for syncing.

[mark299]

If i want to do the download .dat file option. where do i put this file? I am not able to find /user/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

I am using windows 7 so I can only speak to this OS.
You have instalked the wallet executable to your G:/ drive.

If your are using windows go to your root  C:/Users/"your user name"/AppData/Roaming/LitecoinCash. folder.

Unzip and put the bootstrap.dat file (8.5 GB) there.

It is the same directory where you should have the newly created litecoincash.conf file.

The (roaming) directory may be hidden so check your foldr attributes to -unhide if you can't see the path.

Thank you for helping. When i installed the wallet i created a non default location for my litecoin data, so i should unzip the .dat file into this directory instead of the users/appData folder, correct?

[Vladlenius]

I just completed lcc synchronisation. I have 1000 lcc less then I should have. The history shows that just before the hf 1000lcc were send to another wallet (not mine). I didn’t made that or any other transaction on my LTC core wallet, so it is a false transaction. How is it possible? I double checked it on my ltc wallet, where no similar transaction is done.

[marecek666]

it should be fine to have step by step instruction - how to export from LTC core and import to LCC core wallet. It is missing and really have no idea how to do it.
edit:
ok for others how to claim LCC
in LTC CORE wallet
open console and type
-  walletpassphrase yourindividualpassphrase 60 (this only if you have locked wallet) /push ENTER
- dumpprivkey your-Litecoin-address-for-export /push ENTER
console will show you your priv key for the given LTC address and this is the key you are able to import into LCC core

[g.m.tyshenk]

If i want to do the download .dat file option. where do i put this file? I am not able to find /user/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

I am using windows 7 so I can only speak to this OS.
You have instalked the wallet executable to your G:/ drive.

If your are using windows go to your root  C:/Users/"your user name"/AppData/Roaming/LitecoinCash. folder.

Unzip and put the bootstrap.dat file (8.5 GB) there.

It is the same directory where you should have the newly created litecoincash.conf file.

The (roaming) directory may be hidden so check your foldr attributes to -unhide if you can't see the path.

Thank you for helping. When i installed the wallet i created a non default location for my litecoin data, so i should unzip the .dat file into this directory instead of the users/appData folder, correct?

No, I believe that  regardless of where you installed the wallet executable files Windows creates a user Appdata folder for LCC on the root drive.  You need to put the bootstrap.dat  and litecoincash.conf files in the right place or you will continue to get script and sync errors.
You can try copying the files to your G:/ LCC wallet directory but I am sure it will not work.

[g.m.tyshenk]

it should be fine to have step by step instruction - how to export from LTC core and import to LCC core wallet. It is missing and really have no idea how to do it.

Yes!!!!! It is a steep learning curve to figure out the wallet sync .... There are no good instructions but lots of good help and advice from this thread!

I had to read through 40 pages on this forum before  I found the "nuggets" of information on how to successfully sync the LCC wallet and claim LCC.

Everyone (especially those like me claiming forked coins for tbe first time) is having to struggle through this!  

[marecek666]

If i want to do the download .dat file option. where do i put this file? I am not able to find /user/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

I am using windows 7 so I can only speak to this OS.
You have instalked the wallet executable to your G:/ drive.

If your are using windows go to your root  C:/Users/"your user name"/AppData/Roaming/LitecoinCash. folder.

Unzip and put the bootstrap.dat file (8.5 GB) there.

It is the same directory where you should have the newly created litecoincash.conf file.

The (roaming) directory may be hidden so check your foldr attributes to -unhide if you can't see the path.

Thank you for helping. When i installed the wallet i created a non default location for my litecoin data, so i should unzip the .dat file into this directory instead of the users/appData folder, correct?

No, I believe that  regardless of where you installed the wallet executable files Windows creates a user Appdata folder for LCC on the root drive.  You need to put the bootstrap.dat  and litecoincash.conf files in the right place or you will continue to get script and sync errors.
You can try copying the files to your G:/ LCC wallet directory but I am sure it will not work.

putting bootstrap into data directory does not work for me. After moving this file into LCC data dir when I start LCC, it does not recognize it. It want sync from the scratch. The best way is to use this: http://mirror.enigma-mining.de/lcc/LitecoinCash_Appdata_Complte.7z
After putting this into LCC data dir, it recognizes whole and simply sync. only the last blocks.

[g.m.tyshenk]

I just completed lcc synchronisation. I have 1000 lcc less then I should have. The history shows that just before the hf 1000lcc were send to another wallet (not mine). I didn’t made that or any other transaction on my LTC core wallet, so it is a false transaction. How is it possible? I double checked it on my ltc wallet, where no similar transaction is done.

Did you -rescan your LCC wallet after you swept-imported all the private keys?  You need to do that or the wallet won't update properly and show your true amount of LCC..

[jimboscott]

LCC Core Wallet question....

Is it normal that the wallet, after fully synched (locked, encrypted and backed up) has  '0 active connections to the LitecoinCash network'? I take it's still early...?

Same thing happening here.  Stuck 10 weeks behind and no network connections at all.

[Angel Di]

Except as speculation of a coin and the price, it is interesting what in the future can turn out here good that it was possible to speak about prospects of this coin. As is well-known always the first get the greatest profit in something.