DebitMe (OP)
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 05:09:10 AM |
|
I just received 5 block eruptors, and am having quite a problem getting them set up. I have Windows 7 running and got a 10 port hub from Micro Center that I am thinking is pretty cheap.
When I first received these units, I plugged them all into the powered 10 port hub and everything worked fine for about an hour, then they started to have issues. Now, I can only have 1 plugged into the hub and it works, and they all work individually, but plugging two in immediately has problems. Also, plugging the hub into the wall causes problems. There is an LED on the hub that lights up when I plug in the USB to the comp, but when I plug in the wall part also, it dims. One USB miner runs in the hub fine, but plug in the wall port and it stops working. Is this a bad hub?
Plugging in the USB's directly into the computer causes 2 of them to not work for the Bitminter client, I have yet to get them to work in CGminer. I am able to get them to have COM numbers, but CGminer still does not recognize them, I use Bitminter and it recognizes them unless one of the above problems is happening.
Does anyone have any idea? It seems like Windows is having problems identifying multiple miners? Is there a fix?
|
|
|
|
-ck
Legendary
Offline
Activity: 4200
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 05:11:09 AM |
|
cgminer does not use com ports at all, it speaks directly to it via USB using the WinUSB driver instead. Read the ASIC-README.txt file included for instructions to set them up for cgminer.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
HellDiverUK
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 07:34:53 AM |
|
Now, I can only have 1 plugged into the hub and it works, and they all work individually, but plugging two in immediately has problems. Also, plugging the hub into the wall causes problems. There is an LED on the hub that lights up when I plug in the USB to the comp, but when I plug in the wall part also, it dims. One USB miner runs in the hub fine, but plug in the wall port and it stops working. Is this a bad hub?
The dimming LED issue shouts power problems with the hub. Since you're getting COM ports coming up when you do get the miners plugged in, why not try bfgminer - will save you messing about further with WinUSB drivers.
|
|
|
|
demonmaestro
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 08:23:07 AM |
|
Okay doky there. Follow this guide and you will be up in no time. Well after you get another hub. Look into the Dlin Dub-h7 or the Anker 9+1 port hub. You need at least to be safe 5amps to fire all well. 500ma*10=5a. <- you can find at amazon. BFGMiner setup from BTC Guild
|
Feel Like Donating? bc1q0v5nfdejapffewu67gft7zw7zsmnfmmkt3lf02 Buy/Sell BitCoin & LiteCoin Click here! | Looking for a great exchange? CoinBase Has you covered.
|
|
|
DebitMe (OP)
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 11:54:02 AM |
|
I tried using Zadig to make them into Winusb drivers, but that did not work either, Whenever I did that and started CGminer it always gave me an error of something like, they need drivers installed -12, or something to that effect. I may have to try BFGMiner and get a new hub. Here is a link to the hub that I bought http://www.microcenter.com/product/377595/10-Port_USB_20_Powered_HubI assumed it was the hub having problems since it worked for an hour and now will not handle more than 1 at a time. Any particular reason why I can only get 3 to start when just plugging them directly into USB ports? EDIT: BFGMiner is telling me that I Do not have privileges required to open \\.\COM1 But the USB's are not on COM1, and it does not seem to go any further than that. Any Ideas?
|
|
|
|
dave111223
Legendary
Offline
Activity: 1190
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 01:38:00 PM |
|
I just received 5 block eruptors, and am having quite a problem getting them set up. I have Windows 7 running and got a 10 port hub from Micro Center that I am thinking is pretty cheap.
When I first received these units, I plugged them all into the powered 10 port hub and everything worked fine for about an hour, then they started to have issues. Now, I can only have 1 plugged into the hub and it works, and they all work individually, but plugging two in immediately has problems. Also, plugging the hub into the wall causes problems. There is an LED on the hub that lights up when I plug in the USB to the comp, but when I plug in the wall part also, it dims. One USB miner runs in the hub fine, but plug in the wall port and it stops working. Is this a bad hub?
Plugging in the USB's directly into the computer causes 2 of them to not work for the Bitminter client, I have yet to get them to work in CGminer. I am able to get them to have COM numbers, but CGminer still does not recognize them, I use Bitminter and it recognizes them unless one of the above problems is happening.
Does anyone have any idea? It seems like Windows is having problems identifying multiple miners? Is there a fix?
Note: The block eruptors LED turns off and only blinks lightly when a share is found (just want to make sure you are not thinking that the bright LED turning off means they are not working) You mention about plugin your hub into a computer or the wall? If it is a "powered" hub then it's only "powered" when it's plugging into the wall. If you are only plugging it into a computer via USB then you are running off the computers USB port power which is not enough power to run 10 eruptors. If your hub had been working for an hour and now won't work it sounds like there is some kind of fault with the hub, maybe overheated and melted some wiring? (You'll need a fan on your eruptors all the time especially with a plastic hub.
|
|
|
|
DebitMe (OP)
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 01:43:40 PM |
|
I just received 5 block eruptors, and am having quite a problem getting them set up. I have Windows 7 running and got a 10 port hub from Micro Center that I am thinking is pretty cheap.
When I first received these units, I plugged them all into the powered 10 port hub and everything worked fine for about an hour, then they started to have issues. Now, I can only have 1 plugged into the hub and it works, and they all work individually, but plugging two in immediately has problems. Also, plugging the hub into the wall causes problems. There is an LED on the hub that lights up when I plug in the USB to the comp, but when I plug in the wall part also, it dims. One USB miner runs in the hub fine, but plug in the wall port and it stops working. Is this a bad hub?
Plugging in the USB's directly into the computer causes 2 of them to not work for the Bitminter client, I have yet to get them to work in CGminer. I am able to get them to have COM numbers, but CGminer still does not recognize them, I use Bitminter and it recognizes them unless one of the above problems is happening.
Does anyone have any idea? It seems like Windows is having problems identifying multiple miners? Is there a fix?
Note: The block eruptors LED turns off and only blinks lightly when a share is found (just want to make sure you are not thinking that the bright LED turning off means they are not working) You mention about plugin your hub into a computer or the wall? If it is a "powered" hub then it's only "powered" when it's plugging into the wall. If you are only plugging it into a computer via USB then you are running off the computers USB port power which is not enough power to run 10 eruptors. If your hub had been working for an hour and now won't work it sounds like there is some kind of fault with the hub, maybe overheated and melted some wiring? (You'll need a fan on your eruptors all the time especially with a plastic hub. Thanks for the info. Yes I figured out that they blink when they are working. They act really weird though when more than 1 is plugged into the hub. I am assuming that I probably melted something on the hub, since it seems to not get as much power when plugged into the wall, since it will not even run 1 eruptor, but it can run 1 when I do not have it plugged in. Also I had a 120MM fan on them the entire time (which was also on the hub but I am guessing the hub was a pretty cheap POS). Does anyone have a link for a tried and true tested hub that can support 10 of these?
|
|
|
|
aurel57
Legendary
Offline
Activity: 1204
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 04:09:45 PM |
|
Sounds like you wall adapter went out and now your way under powered.
|
|
|
|
Stale
Newbie
Offline
Activity: 46
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 04:27:53 PM |
|
From Microcenter: AC Adapter Output Voltage 5V AC Adapter Output Amperage 2A
5 USB BEs = 2.5A minimum, so you likely overran the hubs PS for a bit. I vote for power problems too.
|
|
|
|
|
DebitMe (OP)
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2013, 06:09:10 PM |
|
From Microcenter: AC Adapter Output Voltage 5V AC Adapter Output Amperage 2A
5 USB BEs = 2.5A minimum, so you likely overran the hubs PS for a bit. I vote for power problems too.
Ahh that makes sense, well that was a waste of $15. Silly me for not doing more research and assuming a powered hub would be fine. No one to blame but myself. And Rival, thanks for the link. I am in the process of ordering 4 Anker hubs which should handle 36 badboys. Hopefully the problems are all behind me. But, would there be a reason as to why having 5 plugged into 5 different USB ports would not make all of them work with Windows 7? I would think that each individual port should have enough juice to run one miner?
|
|
|
|
OldGeek
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 266
Merit: 250
Blitz:The price affects the perception of the news
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 12, 2013, 06:00:48 AM |
|
I couldn't get mine to work directly off of the box either. Got a D-link and all is good.
/Frank
|
|
|
|
Trongersoll
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 12, 2013, 06:03:02 PM |
|
From Microcenter: AC Adapter Output Voltage 5V AC Adapter Output Amperage 2A
5 USB BEs = 2.5A minimum, so you likely overran the hubs PS for a bit. I vote for power problems too.
Ahh that makes sense, well that was a waste of $15. Silly me for not doing more research and assuming a powered hub would be fine. No one to blame but myself. And Rival, thanks for the link. I am in the process of ordering 4 Anker hubs which should handle 36 badboys. Hopefully the problems are all behind me. But, would there be a reason as to why having 5 plugged into 5 different USB ports would not make all of them work with Windows 7? I would think that each individual port should have enough juice to run one miner? Possibly the same issue. perhaps your mother board does not supply enough power for all the ports to run them at the same time.
|
|
|
|
kabopar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 14, 2013, 01:16:03 PM |
|
I replaced the original plug pack that came with the cheap 10 port USB 2.0 hub with another unit (same plug into the hub, same polarity, but a much higher current specification, 4A instead of 2A in this case). If you try bfgminer, use the latest version (3.2.0) which has a lower HW error rate than earlier versions. You'll need to install the serial comms ports (see the BTC Guild guide).
Cheers
|
|
|
|
|