[CLOSED] 0.9 OR LESS ~ BPMC "BLUE FURY" 2.7 GH/s USB MINER! SSINC GB#9!

[CryptoJunky]

Received my tracking order, looking forward to getting these hashing! Thanks SSINC.

[Blood Ninja]

Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    

[Beastlymac]

Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    

For now I would recommend everyone use cgminer or our version of bfgminer 3.0.99 until we fix it. I have been communicating with Luke and we are working out the issues.

[Blood Ninja]

What are the switches needed for cgminer?

I know of bigpic:all for bfgminer

[Beastlymac]

What are the switches needed for cgminer?

I know of bigpic:all for bfgminer

I think it is bf1

[colemab]

What are the switches needed for cgminer?

I know of bigpic:all for bfgminer

I think it is bf1

What version of cg miner is required?

[Blood Ninja]

Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    

For now I would recommend everyone use cgminer or our version of bfgminer 3.0.99 until we fix it. I have been communicating with Luke and we are working out the issues.

switched to your specific  Raspbian Wheezy Setup Bfgminer build and still only getting 2.3GH

Look like these are performing 20% lower than spec.

I'm running only two of them in a D-Link Hi-Speed USB 2.0 7-Port Powered Hub (DUB-H7) and 1 raspberry Pi as controller

[sphinkter]

SSinc :

I PM'd you about my order (yesterday) -- I haven't seen tracking info though...can you check when you get a moment, thanks!

[ssinc]

SSinc :

I PM'd you about my order (yesterday) -- I haven't seen tracking info though...can you check when you get a moment, thanks!

Sorry about that! PM'd you back! Your order ships with Batch #2 that should be arriving on Monday.

[kabopar]

Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    

For now I would recommend everyone use cgminer or our version of bfgminer 3.0.99 until we fix it. I have been communicating with Luke and we are working out the issues.

switched to your specific  Raspbian Wheezy Setup Bfgminer build and still only getting 2.3GH

Look like these are performing 20% lower than spec.

I'm running only two of them in a D-Link Hi-Speed USB 2.0 7-Port Powered Hub (DUB-H7) and 1 raspberry Pi as controller

I am running a single BF, on Win7 per the instructions in https://bitcointalk.org/index.php?topic=319419.0.  With bfgminer ver 3.2.0 and the recommended batch file (bfgminer.exe -S "BF1:all" -o ...) it runs without H errors, but with the same lower hash rate that you are getting (about 2.26 GH/sec)....

[Beastlymac]

Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    

For now I would recommend everyone use cgminer or our version of bfgminer 3.0.99 until we fix it. I have been communicating with Luke and we are working out the issues.

switched to your specific  Raspbian Wheezy Setup Bfgminer build and still only getting 2.3GH

Look like these are performing 20% lower than spec.

I'm running only two of them in a D-Link Hi-Speed USB 2.0 7-Port Powered Hub (DUB-H7) and 1 raspberry Pi as controller

I am running a single BF, on Win7 per the instructions in https://bitcointalk.org/index.php?topic=319419.0.  With bfgminer ver 3.2.0 and the recommended batch file (bfgminer.exe -S "BF1:all" -o ...) it runs without H errors, but with the same lower hash rate that you are getting (about 2.26 GH/sec)....

I am currently doing some testing. Running it on Ubuntu on a vm. I am getting 50-100mhs more on our version if bfgminer. The usbs are hashing at a speed of 2.5-2.8 for me. I would highly recommend Ubuntu virtual machine until we can get windows problems fixed.

[kabopar]

I run Block erupters and a Red fury on one machine. Compiled cgminer without bitfury support and bfgminer with only bitfury support and I run both on the same computer.

I now run both my BE's and single BlueFury on the same Win7 64 machine with 2 separate instances of bfgminer  (3.2.1 for the BE's with the -s erupter: all in the short-cut's target command line and 3.2.0 with bfgminer.exe -S "BF1:all" -o ... in a batch file (as per Beastlymac's mining support thread)).  I'm getting the same performance as when I ran them on 2 separate PC's.  The BE instance is turned on first, then the BF.  There is a brief message when the 2nd one starts, but the BF device is detected consistently.

[ssinc]

I am currently doing some testing. Running it on Ubuntu on a vm. I am getting 50-100mhs more on our version if bfgminer. The usbs are hashing at a speed of 2.5-2.8 for me. I would highly recommend Ubuntu virtual machine until we can get windows problems fixed.

Which version of BFGminer are you running in Ubuntu on your VM?

[Nemo1024]

I take it I didn't make the first batch, as I didn't get a tracking number in the last two days, and there was no postman on my doorstep today.

When will the units from batch 2 be sent out? Hope someone will be able to collect it and it will not be sent back...

[OgNasty]

I can't get cgminer to detect these with the zadig drivers and the default drivers won't install for me to try bfgminer due to them saying access denied when trying to install. 

[ssinc]

I take it I didn't make the first batch, as I didn't get a tracking number in the last two days, and there was no postman on my doorstep today.

When will the units from batch 2 be sent out? Hope someone will be able to collect it and it will not be sent back...

Batch #2 will be here Monday as long as DHL is on time

I can't get cgminer to detect these with the zadig drivers and the default drivers won't install for me to try bfgminer due to them saying access denied when trying to install.  

Have you tried running them on a separate PC?

[tk1337]

@ssinc, received my order today thanks!

@Beastlymac, I am noticing some low rates, I will keep all my support issues in the support thread you opened up (as I feel most people should, as that's what it's there for).

[ssinc]

I can't get cgminer to detect these with the zadig drivers and the default drivers won't install for me to try bfgminer due to them saying access denied when trying to install.  

Have you tried running them on a separate PC?

No.  Why would they need a different PC to run?  Seems I'm not the only one having these issues...  Seriously doubt my PC is the problem.

I ended up running my Red Fury on a Ubuntu VM because my main PC had the same trouble with drivers not installing correctly.

[Nemo1024]

@Beastlymac, I am noticing some low rates, I will keep all my support issues in the support thread you opened up (as I feel most people should, as that's what it's there for).

Tried to find that thread. Could you link to it, please? Could also be a good idea to add a link to it from OP.

[tk1337]

@Beastlymac, I am noticing some low rates, I will keep all my support issues in the support thread you opened up (as I feel most people should, as that's what it's there for).

Tried to find that thread. Could you link to it, please? Could also be a good idea to add a link to it from OP.

https://bitcointalk.org/index.php?topic=319419.0