[CLOSED] 0.9 OR LESS ~ BPMC "BLUE FURY" 2.7 GH/s USB MINER! SSINC GB#9!

[OgNasty]

I can't get cgminer to detect these with the zadig drivers and the default drivers won't install for me to try bfgminer due to them saying access denied when trying to install.  

The access denied issue was because the default driver folder from the linked download was set to encrypted.  Changing that in the properties allowed me to install the drivers and get these running with the supplied bfgminer.  I am getting 2.3GH/s per device.

[colemab]

FWIW,  I purchased 3 units and received them in the mail today.

I have them running temporarily on a windows 7 box and I am getting about 2.22 - 2.34 Ghps (per unit) with bfgminer 3.2.0.  Going to move them to the Linux box at some point . . .

[sbfree]

Well, I was supposed to receive them today, looks like USPS will add salt to the wound....

[TheQuin]

If you want salt, live in the UK. They only shipped 50 of over 500 in the group buy and even they haven't arrived yet.

[fractalbc]

Well, I was supposed to receive them today, looks like USPS will add salt to the wound....

Me too.

The news said that the nut job at LAX delayed flights into southern cal.  I suspect that is why tracking mine last sees it leaving Il.

[x3maniac]

yay i got mine in today getting about 67% hardware errors linux bfgminer

and cgminer for linux don't detect them =(

does anyone know what the little two buttons do on the bottom of the fury's?

[ssinc]

yay i got mine in today getting about 67% hardware errors linux bfgminer

and cgminer for linux don't detect them =(

does anyone know what the little two buttons do on the bottom of the fury's?

The RST is Reset and the PRG is to reprogram if you do a firmware update.

I'm getting 0% HW errors on BFGminer 3.0.99, What version are you using?

[x3maniac]

yay i got mine in today getting about 67% hardware errors linux bfgminer

and cgminer for linux don't detect them =(

does anyone know what the little two buttons do on the bottom of the fury's?

The RST is Reset and the PRG is to reprogram if you do a firmware update.

I'm getting 0% HW errors on BFGminer 3.0.99, What version are you using?

i compiled his newest one. 3.4.0 i don't kno where to get the 3.0.99 version, i have to compile cause i run arm android

and is there a way to have one computer to run both usb BE and usb BF?

p.s. i still haven't received a compensation btc... =)

[Beastlymac]

yay i got mine in today getting about 67% hardware errors linux bfgminer

and cgminer for linux don't detect them =(

does anyone know what the little two buttons do on the bottom of the fury's?

The RST is Reset and the PRG is to reprogram if you do a firmware update.

I'm getting 0% HW errors on BFGminer 3.0.99, What version are you using?

i compiled his newest one. 3.4.0 i don't kno where to get the 3.0.99 version, i have to compile cause i run arm android

and is there a way to have one computer to run both usb BE and usb BF?

p.s. i still haven't received a compensation btc... =)

https://github.com/aauer1/bfgminer

[x3maniac]

yay i got mine in today getting about 67% hardware errors linux bfgminer

and cgminer for linux don't detect them =(

does anyone know what the little two buttons do on the bottom of the fury's?

The RST is Reset and the PRG is to reprogram if you do a firmware update.

I'm getting 0% HW errors on BFGminer 3.0.99, What version are you using?

i compiled his newest one. 3.4.0 i don't kno where to get the 3.0.99 version, i have to compile cause i run arm android

and is there a way to have one computer to run both usb BE and usb BF?

p.s. i still haven't received a compensation btc... =)

https://github.com/aauer1/bfgminer

thank you for the compensation btc.

i will try that out later and report back thanks

[bitterdog]

has anyone hit on anything over 2.2 GH/s on this last batch that shipped other then the very first ones they sold for BTC2.1

I find it disturbing that every one is posting 2.2 GH/s .. Almost like we got sold a Pinto when we were told we would get a mustang

[ssinc]

has anyone hit on anything over 2.2 GH/s on this last batch that shipped other then the very first ones they sold for BTC2.1

I find it disturbing that every one is posting 2.2 GH/s .. Almost like we got sold a Pinto when we were told we would get a mustang

I'm getting reports of 2.2-2.6 mostly.

[ssinc]

Also, UPDATE : BATCH #2 is arriving tomorrow and will ship out tomorrow

Lots of labels will be printed today so expect shipping info in your inboxes by tonight.

Thanks everyone!

[Epinnoia]

has anyone hit on anything over 2.2 GH/s on this last batch that shipped other then the very first ones they sold for BTC2.1

I find it disturbing that every one is posting 2.2 GH/s .. Almost like we got sold a Pinto when we were told we would get a mustang

I'm getting reports of 2.2-2.6 mostly.

Mine isn't getting more than 1.4 Gh/sec. 

[ssinc]

has anyone hit on anything over 2.2 GH/s on this last batch that shipped other then the very first ones they sold for BTC2.1

I find it disturbing that every one is posting 2.2 GH/s .. Almost like we got sold a Pinto when we were told we would get a mustang

I'm getting reports of 2.2-2.6 mostly.

Mine isn't getting more than 1.4 Gh/sec. 

Post what settings you are using here : https://bitcointalk.org/index.php?topic=319419.0

[vesperwillow]

I find it disturbing that every one is posting 2.2 GH/s .. Almost like we got sold a Pinto when we were told we would get a mustang

And in reality, neither are great choices for speed.

[OgNasty]

Here are my results after running 5 Blue Fury devices overnight...



Looks like I'm currently getting between 387MH/s-1.83GH/s on these using the latest version of cgminer...  Average output per device = 1.35GH/s

Should I be worried about the device getting 387MH/s, or the one getting 967MH/s for that matter?

[ssinc]

Batch #2 shipping now!

[fractalbc]

Mine finally made it this afternoon.  Plugging it in gave me permission errors since I didn't update my udev rules when I upgraded cgminer.  Updating the rule file fixed that right up.

I am getting 1.95 GH/s from it on a raspberry pi that is also running 10 erupters with cgminer 3.7.0.  cgminer is usling between 1 and 2% of the cpu so that's not limiting anything.
I am getting 2.2 GH/s from it on a ubuntu linux machine with bfgminer 3.4.0.  bfgminer doesn't include the udev rules but installing them from cgminer lets you run bfgminer without running as root.

Not quite 2.7 GH/s but better than a erupter.

They do get warm if you run them without a fan.  Not as hot as an erupter but toasty warm.

[bitterdog]

Any ETA when compensation will be sent out now that all orders should be shipped?

12EL5cCrzWNJd1SMb9RFsqUS1swebFYqZr