[CLOSED]R5: KnC Jupiter, BELOW-COST+Host! $78+Bonuses! Hashing, 1st payouts sent

[Ashitank]

Probably.  This is going down to hosting on Monday or Tuesday for exactly that reason - heat.  My computer room is at 85 degrees F with the windows open, the outside temperature at ~50 degrees F, and my A/C running 24x7....

But the main reason for the low hashrate seems to be that the version of cgminer that runs on these boxes kind of loses its mind and starts just throwing "unsubmitted shares" errors after running continuously for about a week.  

I'll do a quick reboot.  As long as I have to reboot, I might just as well upgrade the firmware to 0.95, also.  Let's see if that helps...

I hope you update to 0.96 instead of 0.95 , we loosing hash rate is not good

[bobsag3]

Probably.  This is going down to hosting on Monday or Tuesday for exactly that reason - heat.  My computer room is at 85 degrees F with the windows open, the outside temperature at ~50 degrees F, and my A/C running 24x7....

But the main reason for the low hashrate seems to be that the version of cgminer that runs on these boxes kind of loses its mind and starts just throwing "unsubmitted shares" errors after running continuously for about a week.  

I'll do a quick reboot.  As long as I have to reboot, I might just as well upgrade the firmware to 0.95, also.  Let's see if that helps...

I hope you update to 0.96 instead of 0.95 , we loosing hash rate is not good

Ill probably put .96 on it as soon as I get another one down here, just in case.

[Ashitank]

Yes Bobsage , I think by then we will have more data about 0.96 results from other people

[Ashitank]

Redacted I am not sure if you have updated to firmware 0.95 but now we are earning the right mount of BTC that is above ~ 1 BTC for 24 hours at current difficulty & worker 1 hash rate seems to doing good & matching worker 2 hash rate
 

[-Redacted-]

I had to reboot the worker-1 machine because cgminer went crazy on it.  Since I had to reboot anyway, I did do the upgrade to firmware .95.

[firsttimeuser]

WORKER 1 HASH RATE    0 Gh/s

[bobsag3]

WORKER 1 HASH RATE    0 Gh/s

Yup. Its currently in the mail on its way to my hosting facility. It will be back up and running tomorrow morning within 20min of UPS dropping it off.

[Miramyn]

WORKER 1 HASH RATE    0 Gh/s

Yup. Its currently in the mail on its way to my hosting facility. It will be back up and running tomorrow morning within 20min of UPS dropping it off.

That doesn't explain why the hashrate is 0

Surely between -Redacted- and bobsag you guys coulda come up with a way to keep it up and running during transport

A very large extension cord and packed UPS's perhaps???

C`mon I have faith in you

 

[mootinator]

WORKER 1 HASH RATE    0 Gh/s

Yup. Its currently in the mail on its way to my hosting facility. It will be back up and running tomorrow morning within 20min of UPS dropping it off.

I too am saddened by your non-use of magic.

[thomas_s]

WORKER 1 HASH RATE    0 Gh/s

Yup. Its currently in the mail on its way to my hosting facility. It will be back up and running tomorrow morning within 20min of UPS dropping it off.

That doesn't explain why the hashrate is 0

Surely between -Redacted- and bobsag you guys coulda come up with a way to keep it up and running during transport

A very large extension cord and packed UPS's perhaps???

C`mon I have faith in you

 

I have faith in bobsag3 and -Redacted- I don't have faith in UPS lol

*Magic is expensive if it wasn't everyone would be using it

[bobsag3]

WORKER 1 HASH RATE    0 Gh/s

Yup. Its currently in the mail on its way to my hosting facility. It will be back up and running tomorrow morning within 20min of UPS dropping it off.

That doesn't explain why the hashrate is 0

Surely between -Redacted- and bobsag you guys coulda come up with a way to keep it up and running during transport

A very large extension cord and packed UPS's perhaps???

C`mon I have faith in you

 

I have faith in bobsag3 and -Redacted- I don't have faith in UPS lol

*Magic is expensive if it wasn't everyone would be using it

My magic dealer ran out of magic

[-Redacted-]

Magic extension cord deployed...

[-Redacted-]

Went the other way with the hashrate for a while to make up for the time at zero....

[Ashitank]

Went the other way with the hashrate for a while to make up for the time at zero....

Thank you Mr. Humanly perfect

[bobsag3]

Both miners are at my facility, and hashing away happily

Now rolling the .96.1 update out. expect no problems.

[Ashitank]

Hi Bobsage,

Worker 1 hashrate seems a bit low , dont you think.   

Worker 1 was hashing at 267 ~ 278 gh/s but now it is down to 240.

Is worker 1 Jupiter on 0.96.1 firmware , I think 0.95 firmware worked best so far.

[Ashitank]

Worker 1 Hash Rate       234.868 Gh/s  -> 
Worker 2 Hash Rate       280.07 Gh/s   -> 

[bobsag3]

Hi Bobsage,

Worker 1 hashrate seems a bit low , dont you think.   

Worker 1 was hashing at 267 ~ 278 gh/s but now it is down to 240.

Is worker 1 Jupiter on 0.96.1 firmware , I think 0.95 firmware worked best so far.

I got them all running .96.1, and all 4 that I have (2 GB 1 personal 1 other) are showing 520+

[Ashitank]

Hey Bobsage , KNC just release  0.97 firmware LOL , No rest for u bro

Checking this thread for more test results on 0.97 firmware : https://bitcointalk.org/index.php?topic=306969.520;topicseen

[-Redacted-]

I think he just applied .97 to fix the flushwork problems.  Don't know how they're running with it - it takes a few hours for things to settle down and stabilize.