[CLOSED] Group Buy #31 ASICMiner Cubes 0.35 BTC 28-38GH/s

[philipma1957]

a few more photos
...

Thanks for the photos.

Do you have a link for that PSU plug?  My paperclips just don't look good.

  yes ebay seller




http://www.ebay.com/itm/261237555407?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649   

 my psu did not need the resistor some do some don't.  I just snipped the resistor out.  I can use it in another place.

Why do u need this plug? Shouldn't the PSU turn on when you plug the cube to it?

no .     if you have a standalone psu it needs to think it is attached to a motherboard and that you pressed the on switch.   that is what the plug does.


this is true of many psu.  but as I found out my highest quality psu's  my platinum seasonics  did not work even with the tricky little plug attached.


the cheaper quality "everest 85plus 800" was great  with the cheater plug

http://www.newegg.com/Product/Product.aspx?Item=N82E16817104084

I had buyers waiting on these four cubes and since the post office was 2 days late I did not try every psu I have on them. I will test the next set I get more thoroughly.

[bgibso01]

Just purchased 4 more Cubes...Forum having problems so sent info to your email account.

Thanks!!

[stex2009]

So the cube works at low clock setting at 27-28 GHS for me. I want to move the cube out of wired router connection now. Any links will be helpful to follow right directions for the same.

[grumpy619]

Do you have anymore?

[miaviator]

So the cube works at low clock setting at 27-28 GHS for me. I want to move the cube out of wired router connection now. Any links will be helpful to follow right directions for the same.

I don't understand the question? 

You want to move the cube out of a wired router connection to what?

Do your cubes work on high clock settings?

[stex2009]

So the cube works at low clock setting at 27-28 GHS for me. I want to move the cube out of wired router connection now. Any links will be helpful to follow right directions for the same.

I don't understand the question? 

You want to move the cube out of a wired router connection to what?

Do your cubes work on high clock settings?

My cube was at low clock setting. I had it connected to my router using Ethernet cable to get started. I got 26-28 GHS, sometimes 20-25ghs. Can I move it away from the router and just connect to my computer to make it work?

[bgibso01]

So the cube works at low clock setting at 27-28 GHS for me. I want to move the cube out of wired router connection now. Any links will be helpful to follow right directions for the same.

I don't understand the question? 

You want to move the cube out of a wired router connection to what?

Do your cubes work on high clock settings?

My cube was at low clock setting. I had it connected to my router using Ethernet cable to get started. I got 26-28 GHS, sometimes 20-25ghs. Can I move it away from the router and just connect to my computer to make it work?

No, it needs to be plugged into ethernet.  The usb is only for upgrades.  The rates seem low though.  Was that at the pool or what the web interface was showing?  I don't know if anyone has had success with wireless or not.

[philipma1957]

So the cube works at low clock setting at 27-28 GHS for me. I want to move the cube out of wired router connection now. Any links will be helpful to follow right directions for the same.

I don't understand the question?  

You want to move the cube out of a wired router connection to what?

Do your cubes work on high clock settings?

My cube was at low clock setting. I had it connected to my router using Ethernet cable to get started. I got 26-28 GHS, sometimes 20-25ghs. Can I move it away from the router and just connect to my computer to make it work?

you need to be hardwired to the net and do you have a 1000 or a 100 ethernet connection?

http://www.newegg.com/Product/Product.aspx?Item=N82E16833127399  a 100 top speed


http://www.newegg.com/Product/Product.aspx?Item=N82E16817111039   a 1000 top speed.


  those are switches.  most homes are

 router-----switch     so the router needs to be 1000 speed as does the switch

[philipma1957]

A question to SSB do you have any 49 port hubs?  

   I would take one  or two and buy a label.  what label do they need? I sent a pm thanks!

[stex2009]

So the cube works at low clock setting at 27-28 GHS for me. I want to move the cube out of wired router connection now. Any links will be helpful to follow right directions for the same.

I don't understand the question? 

You want to move the cube out of a wired router connection to what?

Do your cubes work on high clock settings?

My cube was at low clock setting. I had it connected to my router using Ethernet cable to get started. I got 26-28 GHS, sometimes 20-25ghs. Can I move it away from the router and just connect to my computer to make it work?

No, it needs to be plugged into ethernet.  The usb is only for upgrades.  The rates seem low though.  Was that at the pool or what the web interface was showing?  I don't know if anyone has had success with wireless or not.

At the pool is never went over 25ghs. On web interface it was showing 25-28 ghs. At one point it was close to 30 too I think.
Well , I just wanted to keep it away from my living room where I kept my modem/router. I wish I could connect the cube to computer and mine, just like other mining devices.

[stex2009]

So the cube works at low clock setting at 27-28 GHS for me. I want to move the cube out of wired router connection now. Any links will be helpful to follow right directions for the same.

I don't understand the question?  

You want to move the cube out of a wired router connection to what?

Do your cubes work on high clock settings?

My cube was at low clock setting. I had it connected to my router using Ethernet cable to get started. I got 26-28 GHS, sometimes 20-25ghs. Can I move it away from the router and just connect to my computer to make it work?

you need to be hardwired to the net and do you have a 1000 or a 100 ethernet connection?

http://www.newegg.com/Product/Product.aspx?Item=N82E16833127399  a 100 top speed


http://www.newegg.com/Product/Product.aspx?Item=N82E16817111039   a 1000 top speed.


  those are switches.  most homes are

 router-----switch     so the router needs to be 1000 speed as does the switch

I have a cable modem from time warner. Use a normal wireless router on top. like a $20-$30 range router. So, this won't work?

[TracerX]

So the cube works at low clock setting at 27-28 GHS for me. I want to move the cube out of wired router connection now. Any links will be helpful to follow right directions for the same.

I don't understand the question?  

You want to move the cube out of a wired router connection to what?

Do your cubes work on high clock settings?

My cube was at low clock setting. I had it connected to my router using Ethernet cable to get started. I got 26-28 GHS, sometimes 20-25ghs. Can I move it away from the router and just connect to my computer to make it work?

you need to be hardwired to the net and do you have a 1000 or a 100 ethernet connection?

http://www.newegg.com/Product/Product.aspx?Item=N82E16833127399  a 100 top speed


http://www.newegg.com/Product/Product.aspx?Item=N82E16817111039   a 1000 top speed.


  those are switches.  most homes are

 router-----switch     so the router needs to be 1000 speed as does the switch

I have a cable modem from time warner. Use a normal wireless router on top. like a $20-$30 range router. So, this won't work?

The cube needs to be connected directly via a wired Ethernet cable.  If you are interested in buying one, a cheap ethernet switch would work.  You would connect the switch to the cable modem, then the wireless router to the switch along side the Ethernet connection to the Cube.

[bitmutiny]

Do you offer a hosting option? If so, how much per cube?

[crashzilla]

I purchased a USB Hub last week.  When will you be shipping again?

[Benny1985]

Anyone heard from SSB lately? I sent him a large sum of coins last week for cubes and haven't heard back.

[miaviator]

So the cube works at low clock setting at 27-28 GHS for me. I want to move the cube out of wired router connection now. Any links will be helpful to follow right directions for the same.

I don't understand the question?  

You want to move the cube out of a wired router connection to what?

Do your cubes work on high clock settings?

My cube was at low clock setting. I had it connected to my router using Ethernet cable to get started. I got 26-28 GHS, sometimes 20-25ghs. Can I move it away from the router and just connect to my computer to make it work?

you need to be hardwired to the net and do you have a 1000 or a 100 ethernet connection?

http://www.newegg.com/Product/Product.aspx?Item=N82E16833127399  a 100 top speed


http://www.newegg.com/Product/Product.aspx?Item=N82E16817111039   a 1000 top speed.


  those are switches.  most homes are

 router-----switch     so the router needs to be 1000 speed as does the switch

I have a cable modem from time warner. Use a normal wireless router on top. like a $20-$30 range router. So, this won't work?

The cube needs to be connected directly via a wired Ethernet cable.  If you are interested in buying one, a cheap ethernet switch would work.  You would connect the switch to the cable modem, then the wireless router to the switch along side the Ethernet connection to the Cube.

http://www.trendnet.com/products/proddetail.asp?prod=100_TEW-650AP to run a cube over wireless.   Requires some setup and either one device per cube or one device to a switch to use multiple cubes.

[milly6]

Got my cube today and its running great! Thanks a lot! Will be ordering again soon 

[CloudzEye]

Anyone heard from SSB lately? I sent him a large sum of coins last week for cubes and haven't heard back.

It is almost Christmas and New Year. I believe he needs his holiday too. No worries.   He will be back.

Merry Christmas and Happy New Year everybody!

[stex2009]

Any tips on how to mine alt coins with this cube?

[TracerX]

Any tips on how to mine alt coins with this cube?

http://multipool.us is a good place to start.