welneto
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 17, 2017, 12:46:18 PM Last edit: March 17, 2017, 01:27:53 PM by welneto |
|
"Bet history table that auto verifies rolls when possible, can also be searched for certain rolls" I can't find the search button to look for a particular roll result such as '77.77' in the history table. Also, how does the variable lastBet work? I want to check if the roll result of every bet I make is 11.11 or 22.22 or 33.33... etc. and print the bet id in the console for future reference if it is. How would one code that? Top left of the bet history from, click on the drop down, select search. is this bot working on nitrogen sports? after configurate martingale and press to start low it keep saying "Current action: Betting 0.0000001 at 49.000000 low" but nothing happens lol
Works fine for me... iirc you can't be logged in to the site and the bot at the same time, so your should close the tab in your browser BEFORE trying to log in with the bot. Nitrogen was having some downtime/maintenance earlier, maybe your error was related to that. Yea it was saying a message to i close nitrogen all time that i open the bot but i'm not with nitrogen open in my browser
|
|
|
|
seuntjie (OP)
Legendary
Offline
Activity: 1717
Merit: 1125
|
|
March 17, 2017, 01:43:39 PM |
|
Yea it was saying a message to i close nitrogen all time that i open the bot but i'm not with nitrogen open in my browser
so... is it working now?
|
|
|
|
HCP
Legendary
Offline
Activity: 2086
Merit: 4361
<insert witty quote here>
|
|
March 17, 2017, 02:43:00 PM |
|
Also, how does the variable lastBet work? I want to check if the roll result of every bet I make is 11.11 or 22.22 or 33.33... etc. and print the bet id in the console for future reference if it is. How would one code that?
so the values you are looking for in lastBet are "roll" and "id"... as in lastBet.roll and lastBet.id So, you could do something like: luckyNumbers = {11.11, 22.22, 33.33, 44.44} for x = 1, #luckyNumbers do if luckyNumbers[x] == lastBet.roll then print("Rolled: [" .. lastBet.roll .. "] with BetID [" .. lastBet.id .. "]") end end
Basically, you are defining an array of the rolls that you want to check for, then iterating over that array and comparing the last roll to each of the values in the array and printing the roll and BetID if it matches one of them You might also want to check out the dicebot programmers discussion thread: https://bitcointalk.org/index.php?topic=1114503.0
|
|
|
|
welneto
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 17, 2017, 03:01:32 PM |
|
Yea it was saying a message to i close nitrogen all time that i open the bot but i'm not with nitrogen open in my browser
so... is it working now? Nope, tried download others versions but he is stuck at 0
|
|
|
|
1982dre
|
|
March 17, 2017, 03:20:51 PM |
|
Thanks for adding Dicebot to DuckDice. The speed is really great. 4rolls/sec isn't a speed you get on other sites so far I know.
|
|
|
|
sikkan
|
|
March 18, 2017, 07:50:57 PM |
|
Thanks for adding Dicebot to DuckDice. The speed is really great. 4rolls/sec isn't a speed you get on other sites so far I know.
Damn, gotta try it out. I get 1.5 bets/sec at rollin which I thought was good
|
|
|
|
cancerbola
|
|
March 19, 2017, 07:16:45 AM |
|
Hi, where are the bet history files usually located at? The bot has just deleted ~200,000 bets from my history while it was still betting. Now I only have only 1 bet in the history. Is there a way to recover them?
Edit: it looks like I had some other dice site selected instead of Primedice thus the bot could not fetch the 200k bets. Phew... I nearly had a heart attack.
I am still curious where the file is located at.
|
|
|
|
seuntjie (OP)
Legendary
Offline
Activity: 1717
Merit: 1125
|
|
March 19, 2017, 07:31:05 AM |
|
Hi, where are the bet history files usually located at? The bot has just deleted ~200,000 bets from my history while it was still betting. Now I only have only 1 bet in the history. Is there a way to recover them?
Edit: it looks like I had some other dice site selected instead of Primedice thus the bot could not fetch the 200k bets. Phew... I nearly had a heart attack.
I am still curious where the file is located at.
dicebot.db in the folder the EXE is located in.
|
|
|
|
|
sikkan
|
|
March 19, 2017, 07:02:30 PM |
|
|
|
|
|
donaldbit
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 19, 2017, 07:20:24 PM |
|
Hi, any news for the Linux version by now? Thanks a lot!
|
|
|
|
Pattberry
|
|
March 19, 2017, 08:15:33 PM |
|
Thanks for adding Dicebot to DuckDice. The speed is really great. 4rolls/sec isn't a speed you get on other sites so far I know.
Really good to see more updates from dicebot,thanks for adding duckdice as i was waiting for you to add this so that i can start rolling. I guess now all the major dice sites is covered by the bot,thanks for the great job seuntjie for players like me who like to have fun with your bot.
|
|
|
|
seuntjie (OP)
Legendary
Offline
Activity: 1717
Merit: 1125
|
|
March 20, 2017, 06:50:25 AM |
|
Thanks for notifying me, I'll look into it. Awesome, best of luck to you. Hi, any news for the Linux version by now? Thanks a lot!
None yet, sorry.
|
|
|
|
sikkan
|
|
March 20, 2017, 09:52:48 AM |
|
I just installed dicebot on another system I have and tried both 3.3.3 and 3.3.1 and both gets an error after about 4K bets. It says something about objects and references error. I´ll get bak with a more accurate error report when the same error comes back.
It works flawlessly on my laptop so not sure why the error is occuring...
edit* the program actually crashed, out of memory.. althoug I was only using about 1,5 GB out of 6 GB RAM in this rigg.. hmm.. I´ll let it go again, but without the stats-page up.
|
|
|
|
seuntjie (OP)
Legendary
Offline
Activity: 1717
Merit: 1125
|
|
March 20, 2017, 11:54:36 AM |
|
I just installed dicebot on another system I have and tried both 3.3.3 and 3.3.1 and both gets an error after about 4K bets. It says something about objects and references error. I´ll get bak with a more accurate error report when the same error comes back.
It works flawlessly on my laptop so not sure why the error is occuring...
edit* the program actually crashed, out of memory.. althoug I was only using about 1,5 GB out of 6 GB RAM in this rigg.. hmm.. I´ll let it go again, but without the stats-page up.
You'll have to give me more details than that please. Which site were you playing on? Do you have any settings like reset seed/withdraw etc set? Can you give me the full error messages?
|
|
|
|
sikkan
|
|
March 20, 2017, 11:55:58 AM Last edit: March 20, 2017, 01:36:08 PM by sikkan |
|
I just installed dicebot on another system I have and tried both 3.3.3 and 3.3.1 and both gets an error after about 4K bets. It says something about objects and references error. I´ll get bak with a more accurate error report when the same error comes back.
It works flawlessly on my laptop so not sure why the error is occuring...
edit* the program actually crashed, out of memory.. althoug I was only using about 1,5 GB out of 6 GB RAM in this rigg.. hmm.. I´ll let it go again, but without the stats-page up.
You'll have to give me more details than that please. Which site were you playing on? Do you have any settings like reset seed/withdraw etc set? Can you give me the full error messages? Rollin.io as I have on my laptop (which has worked flawlessly) No special settings, 14 sats per bet, x2 bet size if lose. 48% win chance and stop bet if 14 losses occur. Ill take a screenshot when/if it happens again edit* http://imgur.com/a/fM3AkPerhaps its the .net framework thah buggs out. I´ll try to update to 4.6 and see if it runs smoother.
|
|
|
|
Victorycoin
|
|
March 20, 2017, 02:08:39 PM |
|
Seuntjie, can you give me a hand how on programmer's mode, I can go about coding an iteration of same bet size 10 times. On loss, nextbet should be, previousbet*4, then same bet size maintained until 10 consecutive winnings turns up and then back to basebet.
|
|
|
|
seuntjie (OP)
Legendary
Offline
Activity: 1717
Merit: 1125
|
|
March 20, 2017, 02:29:12 PM |
|
Seuntjie, can you give me a hand how on programmer's mode, I can go about coding an iteration of same bet size 10 times. On loss, nextbet should be, previousbet*4, then same bet size maintained until 10 consecutive winnings turns up and then back to basebet.
I don't really have time to help people write scripts, sorry. Please take a look at https://bot.seuntjie.com/programmermode.aspx and the tutorials linked in it. Alternatively you can ask at https://bitcointalk.org/index.php?topic=1114503There's usually someone willing to help, but usually only if you've tried something yourself.
|
|
|
|
sikkan
|
|
March 20, 2017, 02:59:45 PM |
|
I just installed dicebot on another system I have and tried both 3.3.3 and 3.3.1 and both gets an error after about 4K bets. It says something about objects and references error. I´ll get bak with a more accurate error report when the same error comes back.
It works flawlessly on my laptop so not sure why the error is occuring...
edit* the program actually crashed, out of memory.. althoug I was only using about 1,5 GB out of 6 GB RAM in this rigg.. hmm.. I´ll let it go again, but without the stats-page up.
You'll have to give me more details than that please. Which site were you playing on? Do you have any settings like reset seed/withdraw etc set? Can you give me the full error messages? Rollin.io as I have on my laptop (which has worked flawlessly) No special settings, 14 sats per bet, x2 bet size if lose. 48% win chance and stop bet if 14 losses occur. Ill take a screenshot when/if it happens again edit* http://imgur.com/a/fM3AkPerhaps its the .net framework thah buggs out. I´ll try to update to 4.6 and see if it runs smoother. after almost 7K bets it seems to helped after the installation of .net framewoek 4.6! FYI edit* or not.. http://imgur.com/a/044iw
|
|
|
|
Victorycoin
|
|
March 20, 2017, 04:32:59 PM |
|
Seuntjie, can you give me a hand how on programmer's mode, I can go about coding an iteration of same bet size 10 times. On loss, nextbet should be, previousbet*4, then same bet size maintained until 10 consecutive winnings turns up and then back to basebet.
I don't really have time to help people write scripts, sorry. Please take a look at https://bot.seuntjie.com/programmermode.aspx and the tutorials linked in it. Alternatively you can ask at https://bitcointalk.org/index.php?topic=1114503There's usually someone willing to help, but usually only if you've tried something yourself. I didn't mean writing the script for me, just some clue on how to accomplish iteration, I already have couple of script running. All the same, thanks for pointing me to the link, will dig in to see how it is done.
|
|
|
|
|