cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 01:32:51 AM Last edit: October 09, 2013, 02:50:33 AM by cshelswell |
|
I'm looking for some help or advice on a blade erupter i just got. I managed to set one up no problem but I think I must have got the power a bit funny to the other as I managed to cook a chip ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I've attached a picture. I can't seem to find anything on the net about the damaged one so i'm not sure how to replace it. Just wondering if anyone might know of where I might get a replacement from. The card still boots and I can access the config screen but it just wont hash. I'd hoped it might only have knocked out a row of asics but the whole card seems to have gone. Totally gutted and hoping I might able to fix it. Any advice would be very gratefully received. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.hireahenchman.co.nz%2Fphoto1.jpg&t=665&c=gcgwZcuGU0P7MA) EDIT: I've just had a bit of help in the direction of this: http://www.vishay.com/docs/72212/si4320dy.pdf don't know if that helps?
|
|
|
|
|
cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 02:59:53 AM |
|
Awesome thanks! On further looking though judging from the surrounding chips i'm going to assume that the mark on it is:
4394 NK∆ W21C
So would that be a different one? My electronics isn't great so the help is much appreciated.
EDIT: Apparently it's a MOSFET but googling 4394 MOSFET doesn't look as productive as the 4320
|
|
|
|
|
cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 03:13:43 AM |
|
Amazing thank you so much! Now to see if can find anyone who'll sell me just one ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Thanks again
|
|
|
|
tk1337
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 03:19:12 AM |
|
Amazing thank you so much! Now to see if can find anyone who'll sell me just one ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Thanks again There were a few sellers on there that noted the minimum at one piece, but you never know ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Might try checking with Newark.com I didn't search there, but they have awesome phone support for stuff like this.
|
|
|
|
cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 03:23:24 AM |
|
yeah i saw some that said 1 for minimum order. I just sent a few emails off I'll see if any come back positive. Fingers crossed. I was gutted when i saw it smoking. It only just arrived today too!
|
|
|
|
tk1337
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 03:27:28 AM |
|
yeah i saw some that said 1 for minimum order. I just sent a few emails off I'll see if any come back positive. Fingers crossed. I was gutted when i saw it smoking. It only just arrived today too!
I just had a 1200W PSU start melting one of it's cables (melted the modular connector at the PSU) so all my blades are stopped atm, accept for two I put temp on another PSU, only to semi-freak out when nothing happens after plugging them in, first thing I did was replace the fuse and it works (yay). However I am noticing the fuse that was in the blade from the factory was an 8A, however the extra fuses that came with the blades are all 10A... Anyhow, extra fuse solved it fast, but left me looking for the fuses online, so it's always handy to have some around. Part No# 0451010.MRL http://www.newark.com/littelfuse/0451010-mrl/surface-mount-fuse/dp/12J2850?Ntt=12J2850
|
|
|
|
cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 03:30:52 AM |
|
cheers - i actually got a couple of them with the board. It's a shame that didn't go first as i'd have two boards up and running now. Still if it can be fixed I'll be a happy guy.
|
|
|
|
HellDiverUK
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 07:16:52 AM |
|
The fuses are the standard vehicle type. Any garage will have them, they'll sometimes give you a few if you ask nicely - they're beyond cheap, I think it's about £5 for 100 when you're buying them from a wholesaler.
|
|
|
|
tk1337
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 07:38:31 AM |
|
The fuses are the standard vehicle type. Any garage will have them, they'll sometimes give you a few if you ask nicely - they're beyond cheap, I think it's about £5 for 100 when you're buying them from a wholesaler.
Not on the v2 blades, the fuses are surface mount fuses.
|
|
|
|
cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 07:55:29 AM |
|
yeah and sadly not a fuse anyway. Though I might have found a solution: PART NUMBER: SI4394DY-T1-E3 DESCRIPTION: VISHAY SOP MOQ: 10pcs UNIT PRICE: USD $3.00 From http://www.eis-ic.com/english/ So assuming it's the right part then it's not too much to have to fork out to fix it. Plus I'll have some extras if anyone else here blows one ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
tk1337
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 09:32:49 AM |
|
yeah and sadly not a fuse anyway. Though I might have found a solution: PART NUMBER: SI4394DY-T1-E3 DESCRIPTION: VISHAY SOP MOQ: 10pcs UNIT PRICE: USD $3.00 From http://www.eis-ic.com/english/ So assuming it's the right part then it's not too much to have to fork out to fix it. Plus I'll have some extras if anyone else here blows one ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) looks like the right part #
|
|
|
|
cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 07:09:42 PM |
|
great thanks! Looks like it's only $10 to buy 40 more so I'm going to grab 50 of them. If anyone else here finds themselves in the same situation as me I should have some spares
|
|
|
|
wpgdeez
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 07:22:13 PM |
|
Contact the seller, blades are supposed to have a 6 month warranty.
|
|
|
|
cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2013, 09:10:49 PM |
|
it was just a private sale but yes maybe not a bad idea. I'll see where he got them from.
|
|
|
|
|
cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 13, 2013, 03:08:28 AM |
|
ah on second look I think i'm being stupid. It won't do the job ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
|
cshelswell (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 13, 2013, 04:52:33 AM |
|
nice one thanks. I have actually got some ordered from China. I was just being a bit impatient. Kind of hurts to know it's just sat in a box doing nothing right now when it should be busy hashing away
|
|
|
|
|