HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
August 25, 2018, 08:06:18 PM |
|
I wish hash auger miner supports old GPUs ,both amd and nvidia
There are many Hash Auger users that use older Nvidia GPUs such as the 980 without any problems. The only restrictions on the Nvidia GPUs that are supported come from the mining programs themselves and those are the same limitations that any algorithm switching software using those same programs will have. Hash Auger has always been Nvidia only.
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
August 25, 2018, 08:12:22 PM |
|
2.3.2.1 - when developers mining stops - program don't restart mining. P.S.: Info: Finished mining today's developer contribution. Thank you for your continued use of this software And nothing, all GPUs idle...
Some users are reporting that as an intermittent issue depending on their pool refresh rate and some other conditions. Mining will usually resume on its own after the next refresh of pool data. I am currently working on a fix for it. Alternatively, version 2.3.1 does not have that issue and can be downloaded from: https://hashauger.com/downloads/HashAugerInstaller_2_3_1.zip
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
August 27, 2018, 01:29:10 PM |
|
OK, I give up. Software is nice, nut it simply doesn't work with my 6x 1050ti rigs.Either with trex and Cryptodrege and enemy computer is resetting at least twice a day. Probably wrong configuration of the fact that HA open one instance / card. Itried almost all combination with nvidia inspector in term of PL/core/memory. The "internal" overclock doesn't work any different. thanks aniway and bye
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
August 27, 2018, 05:27:50 PM |
|
OK, I give up. Software is nice, nut it simply doesn't work with my 6x 1050ti rigs.Either with trex and Cryptodrege and enemy computer is resetting at least twice a day. Probably wrong configuration of the fact that HA open one instance / card. Itried almost all combination with nvidia inspector in term of PL/core/memory. The "internal" overclock doesn't work any different. thanks aniway and bye
Thanks for trying the software and sorry to hear it did not work out for you. I am not sure what you mean by “internal” overclock as Hash Auger does not change any clock speeds or other GPU settings unless the user sets them specifically. As for the stability issues, while some users have problems with Cryptodredge, other users including myself go days without reboots. Best of luck to you.
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 03, 2018, 01:01:24 AM |
|
Hash Auger 2.3.3 has been released to add support for Cryptodredge 9, Spmod-Raven 10, T-Rex 6.3 and Z-Enemy 1.17. It also fixes some miscellaneous issues that some users were experiencing and provides a few usability enhancements.
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 04, 2018, 09:56:40 PM |
|
Hash Auger 2.3.4 has been released to update CryptoDredge and Z-Enemy to their latest releases (91. and 1.18 respectively). Version 1.18 of Z-Enemy is primarily focused on xevan performance improvements.
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 06, 2018, 10:51:26 PM |
|
Hash Auger 2.3.5 has been released to fix an issue where mining would sometimes not start if the Check Internet Connection setting was not enabled. Also, it fixes an issue where the Yescrypt hash rate may not be benchmarked correctly in some cases.
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 08, 2018, 05:19:43 PM |
|
Hash Auger 2.3.6 has been released to fix an issue with Pool Refresh Rates greater than an hour as well as a couple issues related to GPU Monitoring. Also, setup tips for beginners have been added to the new wiki: http://hashauger.wikidot.com/basic-tips
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 09, 2018, 10:00:48 PM |
|
The latest addition to the new Hash Auger wiki is a page that describes the many ways that Hash Auger can help reduce the electricity costs associated with mining: http://hashauger.wikidot.com/reducing-electric-costs. In addition to easily setting default and per-algorithm power limits, the software supports time of day mining and profit-based (as opposed to revenue based) work switching. Unlike other algorithm-switchers (even those that charge high upfront costs), Hash Auger automatically calculates the energy cost of each algorithm per mining program during benchmarking and selects the most efficient option when mining.
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 10, 2018, 10:28:38 PM |
|
A new wiki article has been added that describes all the features within Hash Auger that can be used to improve mining hash rates, such as algorithm/GPU specific overclock and intensity settings and mining thread management options: http://hashauger.wikidot.com/improve-hash-rates
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 11, 2018, 06:09:03 PM |
|
Hash Auger has been updated to 2.3.7 to include Z-Enemy 1.19 for faster hash rates for x16, x17, hex, bitcore, c11 and more.
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 13, 2018, 03:41:52 AM |
|
Hash Auger 2.4.0 has been released with a new application monitoring feature to automatically restart the app and resume mining if it happens to crash. This release also updates spmod-raven (adds support for c11 and x17 algorithms plus faster x16 hash rates) and t-rex miner (faster hash rates and support for hmq1725) to their latest releases.
|
|
|
|
miks66
Newbie
Offline
Activity: 5
Merit: 1
|
|
September 13, 2018, 04:33:22 AM |
|
Hei
I get an error message: [13.09.2018 7:09] Info: Welcome to Hash Auger 2.4.0. [13.09.2018 7:09] Info: Upgrading coolminer to latest version. [13.09.2018 7:13] Info: Upgrading spmod-raven to latest version. [13.09.2018 7:13] Info: Upgrading t-rex to latest version. [13.09.2018 7:15] Info: Installing miners. Please wait. [13.09.2018 7:15] Info: Downloading pool data. Please wait. [13.09.2018 7:15] Info: Writing 7zip log to disk for coolminer [13.09.2018 7:15] Error: Failed to extract miner package file: coolMiner_1_5.7z. [13.09.2018 7:15] Info: Pool rates downloaded. [13.09.2018 7:15] Info: Writing 7zip log to disk for spmod-raven [13.09.2018 7:15] Error: Failed to extract miner package file: spmodgit11.7z. [13.09.2018 7:15] Info: Miner downloads complete.
what is wrong?
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 14, 2018, 03:12:57 AM |
|
I responded to your question on Discord earlier, but have not heard back so yet, so I thought I would also post the reply here in case you check here first. I do not repackage the mining programs, they come in the original archive format that the author used. Unfortunately, a few users have had similar issues extracting 7zip files based their Windows 10 setup. I had one user have a similar issue because he installed Hash Auger onto the desktop and 7zip did not have permission to extract files to that location. Two other users had similar issues due to permissions with their AppData folder - which is Hash Auger’s default install location. If you installed Hash Auger to the default location, try to install it to a different directory on your hard drive using the same Windows user account that will be running the software. If you keep the config and gpu .xml files in the AppData folder, you should be able to keep your settings and current benchmarks. Hei
I get an error message: [13.09.2018 7:09] Info: Welcome to Hash Auger 2.4.0. [13.09.2018 7:09] Info: Upgrading coolminer to latest version. [13.09.2018 7:13] Info: Upgrading spmod-raven to latest version. [13.09.2018 7:13] Info: Upgrading t-rex to latest version. [13.09.2018 7:15] Info: Installing miners. Please wait. [13.09.2018 7:15] Info: Downloading pool data. Please wait. [13.09.2018 7:15] Info: Writing 7zip log to disk for coolminer [13.09.2018 7:15] Error: Failed to extract miner package file: coolMiner_1_5.7z. [13.09.2018 7:15] Info: Pool rates downloaded. [13.09.2018 7:15] Info: Writing 7zip log to disk for spmod-raven [13.09.2018 7:15] Error: Failed to extract miner package file: spmodgit11.7z. [13.09.2018 7:15] Info: Miner downloads complete.
what is wrong?
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 14, 2018, 06:29:56 PM |
|
Hash Auger 2.4.1 has been released to include support for the latest versions of T-Rex 6.5 and Z-Enemy 1.20. In addition to performance improvements, both of these releases add support for the new bcd algorithm used by BitcoinDiamond. If you are interested in mining this coin, it is currently offered by Icemining.ca (listed in the pools that do not auto-exchange in Hash Auger). You will of course need to create a BitcoinDiamond wallet in order to receive any earnings and at the time of writing, the pool's bcd port appears to be overloaded. Full list of changes: - Upgraded T-Rex to 6.5
- Upgraded Z-Enemy to 1.20
- Fixed an issue where pool data may not load when a pool does not provide a valid TimeSinceLast value for one or more coins.
- Fixed an issue where the OC Settings for individual benchmarks would not enable if the preferred miner was changed.
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 16, 2018, 03:21:54 AM |
|
A new wiki article has been published to describe the various settings that can be used to customize algorithm switching using Hash Auger. Topics covered include: Pool Refresh Rate, Minimum Switch %, pool performance adjustments, automatic benchmark revisions, price basis and mixed pricing, estimate averaging, price adjustment percents, building larger shares, including ports without active miners or recent work, excluding low and high volume ports, Minimum Earnings Amount, Price Spike Limit, switching based on profits instead of revenue and more. http://hashauger.wikidot.com/customize-algorithm-switching
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 16, 2018, 06:49:26 PM |
|
Hash Auger 2.4.2 has been released to add support for the latest version of T-Rex miner (.6.6) - which improves hash rates when mining the new BCD algorithm. This latest release of T-Rex also adds some new features that allow for better integration with Hash Auger. Finally, this version of Hash Auger fixes an issue where auto-benchmarking new miners may not always start as intended. Users who do not regularly install Windows updates should note that this version of Hash Auger now requires .Net Framework 4.7.2 instead of 4.7.1. This version of .Net was released in April, 2018, so anyone who regularly installs OS updates should already have it. Those that do not will need to do a manual install of the .Net framework (there is a link to the downloader on the HA downloads page). Full list of changes: - Upgraded T-Rex to .6.6 (faster BCD hash rates)
- Added support for shutting down T-Rex via the API
- Disabled T-Rex's Telnet API server since Hash Auger does not use it and it will be removed from T-Rex in an upcoming release.
- Fixed an issue where auto-benchmarking updated miners may not start as intended.
To download, please visit: https://hashauger.com/download.html
|
|
|
|
impynick
Jr. Member
Offline
Activity: 77
Merit: 6
|
|
September 18, 2018, 05:51:24 PM |
|
Hello,
I am using ur software however I get an error "warning: no coins meet your guidelines check price spike etc" I dont have any price checks in place, i am unsure why i keep getting this message?
I uninstalled and reinstalled, it comes up even during benchmark
|
|
|
|
HashAuger (OP)
Newbie
Offline
Activity: 481
Merit: 0
|
|
September 18, 2018, 07:45:53 PM |
|
Hello,
I am using ur software however I get an error "warning: no coins meet your guidelines check price spike etc" I dont have any price checks in place, i am unsure why i keep getting this message?
I uninstalled and reinstalled, it comes up even during benchmark
That message is to be expected when you first install the software since the price estimates are based on both pool data and the hash rates recorded during benchmarking. If you are still getting the error message after benchmarking, then it means that the software could not communicate with whichever pool(s) you have enabled. In that case, I would suggest enabling a different pool to see if price estimates are calculated for that pool.
|
|
|
|
bivaetjetakoe
Jr. Member
Offline
Activity: 420
Merit: 1
|
|
September 18, 2018, 09:19:35 PM |
|
a good software, I liked it, reokmenduyu
|
|
|
|
|