BitBurner Fury IN STOCK MAJOR PRICE CUT SOLD OUT!

[wald4tler]

@ cryptx:


When I ordering (No. # 1529) the product was still available.
Now is out of stock...
Will my order delivered, or I have no luck and have to wait?

I ask because the BTC took longer to Transfer (no transaction fee...)

Sincerely yours
Wald4tler

[1713559385]

1713559385

[ummas]

OP change topic name.
Each time some1 posts i`m hoping boards are in stock...

[bbxx]

anyone got his tracking number ?

[wald4tler]

anyone got his tracking number ?

no

I have place the order yesterday ~7:00 BTC Transfere finnished yesterday ~21:00

[bbxx]

just got one

[wald4tler]

just got one

JIPI me2

[jelin1984]

can anyone post some photos of the boards to see it

[hanti]

i have video for you http://youtu.be/WmeJ_gubSJ8 ;p

[chr0me]

i have video for you http://youtu.be/WmeJ_gubSJ8 ;p

Like christmas lights

Are those Jalas on the desk/table?

[hanti]

yes there is jalapeno too with enermax fan on it

[whitefeather]

Hello Cryptx Team. I sent a PM to you. Please review and advise. Thank you.

[cixelsyddyslexic]

Received my two boards, no physical defects that I can see. Hashing away at 96GH total (48GH/board) using

Code:

cgminer  --avalon-options 115200:64:10:d:270 --bitburner-voltage 1300

cgminer 3.6.4 on Debian Linux.

[goxed]

Received 2 boards, hashes well ~40 - 45 GH/s with 2.5% HW errors . Fast shipping. They should advertise their CAN connector whenever someone order >1 board. I wish I had one. Using 2 USB ports on the rPI now.
The real voltage is ~0.3V less then the core voltage set with --bitburner-voltage flag. Tested it with voltmeter.

Code:

sudo apt-get update
sudo apt-get install autoconf libusb-1.0-0-dev libncurses5-dev libcurl4-openssl-dev screen git libtool libudev-dev

mkdir cgminer-git
cd cgminer-git
git clone https://github.com/ckolivas/cgminer.git
cd cgminer
./autogen.sh -enable-avalon
If above fails 
./configure --enable-avalon
make

sudo ./cgminer --avalon-options 115200:32:10:50:256 --bitburner-voltage 1255 

[bbxx]

BTB 0: 56C 280 1087mV | 47.30G/49.59Gh/s | A:376526 R:2015 HW:18964 WU: 692.8/m
 BTB 1: 54C 280 1084mV | 47.49G/50.27Gh/s | A:381207 R:1705 HW:14675 WU: 702.3/m
 BTB 2: 56C 280 1081mV | 52.82G/50.22Gh/s | A:380742 R:1736 HW:13979 WU: 701.6/m

great piece of hardware

--avalon-options 115200:32:10:46:280 --bitburner-voltage 1360 --avalon-cutoff 63 --avalon-fan 80 --avalon-temp 55

i am happy

[pazor]

what is the power consumption?

[jermwerty]

what is the power consumption?

Better than expected actually considering zefir had reported seeing 750W draw for 8, my boards draw 110W less!  Getting ~390GH on my 8 boards drawing 640W on the dot from the wall with a Rosewill Lightning 1300W Gold PS.  Note the blindingly bright LEDs on the boards match well to the obnoxious Rosewill LEDS on the PSU  

Now the question becomes what kind of stability will I see? Currently if I stop/start cgminer its a crapshoot.  I used MinePeon and then did a git for the latest cg to 3.8.1 and got it all working just fine on a cold boot if I boot the raspbpi first and then power on the boards second.  However if I stop/start CG it all goes to heck - seems like the boards need to be "booted" fresh after CG is already running???

Seems like this will work fine until CG restarts    I wonder if the CANBUS has something to do with this, it was giving me issues in the beginning (random boards in the middle of the stack would never start hashing until I rebooted them).  I run two stacks of 4 just so I can contrast/compare behavior (hooked to same raspbpi).  Although I see the pi average load is pretty high (0.8+) ... top alone reports cgminer takes about a 0.4 load!

Has anyone confirmed the --avalon-fan option does indeed work?  I guess I should try.  The whole CANBUS thing makes it confusing, as I assume I am just getting the temp/core volts/etc from the first board only...  My boards show up as BTB, I saw perhaps a firmware update might fix some issues?  I don't know, still playing around, and information is sparse...

[chr0me]

Has anyone confirmed the --avalon-fan option does indeed work?  

Doesn't work for me, even after flashing a different firmware (BBF).

Also, what's the highest the Fury can/will hash at? Seems to be stable at 280.

[ummas]

Look at the temp. Fury chips needs the right one. Not to low, not to high.

[cixelsyddyslexic]

BTB 0: 56C 280 1087mV | 47.30G/49.59Gh/s | A:376526 R:2015 HW:18964 WU: 692.8/m
 BTB 1: 54C 280 1084mV | 47.49G/50.27Gh/s | A:381207 R:1705 HW:14675 WU: 702.3/m
 BTB 2: 56C 280 1081mV | 52.82G/50.22Gh/s | A:380742 R:1736 HW:13979 WU: 701.6/m

great piece of hardware

--avalon-options 115200:32:10:46:280 --bitburner-voltage 1360 --avalon-cutoff 63 --avalon-fan 80 --avalon-temp 55

i am happy

Confirmed, I am hitting 100GH with 2 boards using these settings. Well, I don't use the avalon-cutoff,fan or temp settings, just the --avalon-options and --bitburner-voltage.

[wald4tler]

can I use the power supply via the green screw terminal, or must I use the PCI connector?

(sorry about my bad english, Google Translator helps me )