XMR-stak-JK 2.10.7 Compiled with no devfee (Updated: 2019-8-18)

[Bearier]

Hello! Do you have a solution to this problem?

[1714862079]

1714862079

[1714862079]

1714862079

[1714862079]

1714862079

[1714862079]

1714862079

[1714862079]

1714862079

[JaredKaragen]

Hello! Do you have a solution to this problem?

yes, its telling you to modify threads in the nvidia.txt file....  id suggest you visit the fierce-xmrstak gitbhub for extra documentation, but it should be pretty self-explanitory when you open the file.

if you don't know which card is causing the error;  comment out one card at a time in the file, and you'll deduce which needs modified.  At this point; it could be one or all of them.

[john1010]

I read some of the xmr stak topic and I saw that they got 800-1000h in their 570 4gb and 8gb cards, I wonder why I only got 600h plus,  I am new to cryptonight algo, since I started mining, I only mined eth and other eth base algo.. can somebody here share some advice below is my settings in amd.txt Is there any way to increase my hashrate.. Thanks in advance to those who are willing to help..   

HASHRATE REPORT - AMD
| ID |    10s |    60s |    15m | ID |    10s |    60s |    15m |
|  0 |  655.1 |  654.4 |  654.7 |  1 |  672.9 |  673.0 |  672.9 |
|  2 |  675.8 |  675.5 |  675.4 |  3 |  682.3 |  682.4 |  682.3 |
|  4 |  683.4 |  683.2 |  683.1 |  5 |  677.3 |  677.5 |  677.5 |
|  6 |  633.4 |  633.5 |  633.9 |  7 |  652.2 |  654.4 |  655.0 |
|  8 |  655.4 |  655.1 |  655.4 |  9 |  654.8 |  654.8 |  654.5 |
| 10 |  672.3 |  671.8 |  671.8 | 11 |  652.7 |  654.7 |  654.5 |
Totals (AMD):  7967.6 7970.4 7970.8 H/s
-----------------------------------------------------------------
Totals (ALL):   7967.6 7970.4 7970.8 H/s
Highest:  7977.6 H/s

List of 12 cards accordingly

0. RX 570 4GB
1. RX 570 8GB
2. RX 570 8GB
3. RX 570 8GB
4. RX 570 8GB
5. RX 570 8GB
6. RX 570 8GB
7. RX 570 4GB
8. RX 570 4GB
9. RX 570 4GB
10. RX 570 8GB
11. RX 570 4GB

Code:

// gpu: Ellesmere memory:3920
  // compute units: 32
  { "index" : 0,
    "intensity" : 896, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3712
  // compute units: 32
  { "index" : 1,
    "intensity" : 1000, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3712
  // compute units: 32
  { "index" : 2,
    "intensity" : 1000, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3920
  // compute units: 32
  { "index" : 3,
    "intensity" : 1000, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3920
  // compute units: 32
  { "index" : 4,
    "intensity" : 1000, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3920
  // compute units: 32
  { "index" : 5,
    "intensity" : 1000, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3712
  // compute units: 32
  { "index" : 6,
    "intensity" : 1000, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3920
  // compute units: 32
  { "index" : 7,
    "intensity" : 896, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3920
  // compute units: 32
  { "index" : 8,
    "intensity" : 896, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3712
  // compute units: 32
  { "index" : 9,
    "intensity" : 896, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3712
  // compute units: 32
  { "index" : 10,
    "intensity" : 1000, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3920
  // compute units: 32
  { "index" : 11,
    "intensity" : 896, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },

[gambera]

I read some of the xmr stak topic and I saw that they got 800-1000h in their 570 4gb and 8gb cards, I wonder why I only got 600h plus,  I am new to cryptonight algo, since I started mining, I only mined eth and other eth base algo.. can somebody here share some advice below is my settings in amd.txt Is there any way to increase my hashrate.. Thanks in advance to those who are willing to help..   

HASHRATE REPORT - AMD
| ID |    10s |    60s |    15m | ID |    10s |    60s |    15m |
|  0 |  655.1 |  654.4 |  654.7 |  1 |  672.9 |  673.0 |  672.9 |
|  2 |  675.8 |  675.5 |  675.4 |  3 |  682.3 |  682.4 |  682.3 |
|  4 |  683.4 |  683.2 |  683.1 |  5 |  677.3 |  677.5 |  677.5 |
|  6 |  633.4 |  633.5 |  633.9 |  7 |  652.2 |  654.4 |  655.0 |
|  8 |  655.4 |  655.1 |  655.4 |  9 |  654.8 |  654.8 |  654.5 |
| 10 |  672.3 |  671.8 |  671.8 | 11 |  652.7 |  654.7 |  654.5 |
Totals (AMD):  7967.6 7970.4 7970.8 H/s
-----------------------------------------------------------------
Totals (ALL):   7967.6 7970.4 7970.8 H/s
Highest:  7977.6 H/s

List of 12 cards accordingly

0. RX 570 4GB
1. RX 570 8GB
2. RX 570 8GB
3. RX 570 8GB
4. RX 570 8GB
5. RX 570 8GB
6. RX 570 8GB
7. RX 570 4GB
8. RX 570 4GB
9. RX 570 4GB
10. RX 570 8GB
11. RX 570 4GB

I'm surprised that no one else answered your question. If you search online you'll find answers. Try running 2 GPU threads per card, example for GPU 0 and 1 (repeat for all of your cards):

Code:

{ "index" : 0, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 0, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },


{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },

[MagicSmoker]

I read some of the xmr stak topic and I saw that they got 800-1000h in their 570 4gb and 8gb cards, I wonder why I only got 600h plus,  I am new to cryptonight algo, since I started mining, I only mined eth and other eth base algo.. can somebody here share some advice below is my settings in amd.txt Is there any way to increase my hashrate.. Thanks in advance to those who are willing to help..    

Read more of this topic, then, because I just answered the same question on the previous page.

Short answer: lower the intensity to the 800 range, make sure it is an integer multiple of worksize (ie - divisible by 8 ) and double the bracketed entries that start with index for each card to run 2 threads.

EDIT - and I was responding to you that time as well?! Did you not understand what I wrote or did it not work for you or what?

[JaredKaragen]

*deleted*

Start your own thread.  Do not post that here.



This thread is not for 4 post users to piggyback a potential piece of spyware/virus.


Its not you;  its the fact that nobody knows you and your true intentions.  I won't have that here; and you aren't the first one to have a build removed.

No hard feelings.

[nsummy]

If you are going to provide this "service" for everyone, you should at least obey the GPL, fork this, and post the source code along with the binaries.   You cannot change the code and only provide binaries.

On a side note its kind of sad that there are so many people in this thread asking technical questions and reporting problems.  You get what you pay for.  Pay the minimal 2% to support the dev and post the issue on their github.  Its quite possible that any problem you are having is a bug in the software.

[impynick]

Oh none taken at all. I wasn’t trying to really do anything but help. There’s nothing to “piggyback” especially since there’s no dev fee lol.  Sorry. But yeah 2.4.7 and 2.4.4 worked fine with the 1080. And compiling was fun. Can 2.4.4 mine RYO? Just wondering thanks again!

[JaredKaragen]

Oh none taken at all. I wasn’t trying to really do anything but help. There’s nothing to “piggyback” especially since there’s no dev fee lol.  Sorry. But yeah 2.4.7 and 2.4.4 worked fine with the 1080. And compiling was fun. Can 2.4.4 mine RYO? Just wondering thanks again!

it looks like cryptonight-heavy was asses for 2.4.2/2.4.4 so i don't see why not.


Only small optimizations were made in the later versions.



Ive been busy setting up my machine for my .com, and getting it all configured.... havent stepped in to re-compile the newest source yet.

I plan to do it when the fork for CN7 is coded and released in xmrstak.

[MagicSmoker]

If you are going to provide this "service" for everyone, you should at least obey the GPL, fork this, and post the source code along with the binaries.   You cannot change the code and only provide binaries.

Who's going to stop him? The open source software police? Interpol? The Avengers?

[Mattthev]

If you are going to provide this "service" for everyone, you should at least obey the GPL, fork this, and post the source code along with the binaries.   You cannot change the code and only provide binaries.

Who's going to stop him? The open source software police? Interpol? The Avengers?

Well, downloading something that is open source without available source code is kinda dangerous always. I don't know this guy so he might be trustful. But there are also guys I think it was some russians, that they edited PBE 1.6 and it was stealing something or changing wallet address after copy paste or something like that. And believe me some of my customers also send ETH to different wallets even in e-mails and orders was my wallet due to that paste trojan or whatever is that.
Without source codes you can mine to OP wallet without knowing it... Not saying it does, but there is most likely something shady without any source codes released.

[MadKernel]

If you are going to provide this "service" for everyone, you should at least obey the GPL, fork this, and post the source code along with the binaries.   You cannot change the code and only provide binaries.

Who's going to stop him? The open source software police? Interpol? The Avengers?

You can distribuite GPL binaries without source code, but accompanied with an offer to get the source code. The price of the source code cannot be  higher than the price of the binaries.

[JaredKaragen]

If you are going to provide this "service" for everyone, you should at least obey the GPL, fork this, and post the source code along with the binaries.   You cannot change the code and only provide binaries.

On a side note its kind of sad that there are so many people in this thread asking technical questions and reporting problems.  You get what you pay for.  Pay the minimal 2% to support the dev and post the issue on their github.  Its quite possible that any problem you are having is a bug in the software.

if it had been requested;  it would have been provided.


All changes made were clearly noted.  so yes;  I have made the changes pretty damned available and apparent.  Nowhere in GPL does it require me to post to github or any specific location.



Chill the f out or be deleted.  pretty simple.   I don't have to deal with your BS at all.

As I said before:
If you don't trust me;  don't use it.

if fierce-uk had a problem with what I was doing;  he would contact me as its pretty easy.... and furthermore;  he wouldn't post the source with the ability to edit the devfee.


put away your internet warrior caps;  if you wanna go down that road;  I'll just continually delete every one of your posts.


this is ridiculous.   I flat out wont put up with it past this reply.  Say something again, and ill just delete all of your comments.    You have been warned.

[BigHarryArmsi]

Hi, all. Does anyone know or want to volunteer how much power an AMD 580 8gb is consuming or a 580 8gb rig is drawing at the wall? I hear STAK is a low power miner and am very sensitive to wattage at the wall. Any help is appreciated.

[STSToken]

Thanks for this.

[JaredKaragen]

Hi, all. Does anyone know or want to volunteer how much power an AMD 580 8gb is consuming or a 580 8gb rig is drawing at the wall? I hear STAK is a low power miner and am very sensitive to wattage at the wall. Any help is appreciated.

IDK about low power;  it would take a BIOS flash and underclocking to get low consumption. 

I suggest peering over the configuration notes on github on getting the best performance out of it.

[john1010]

I read some of the xmr stak topic and I saw that they got 800-1000h in their 570 4gb and 8gb cards, I wonder why I only got 600h plus,  I am new to cryptonight algo, since I started mining, I only mined eth and other eth base algo.. can somebody here share some advice below is my settings in amd.txt Is there any way to increase my hashrate.. Thanks in advance to those who are willing to help..    

HASHRATE REPORT - AMD
| ID |    10s |    60s |    15m | ID |    10s |    60s |    15m |
|  0 |  655.1 |  654.4 |  654.7 |  1 |  672.9 |  673.0 |  672.9 |
|  2 |  675.8 |  675.5 |  675.4 |  3 |  682.3 |  682.4 |  682.3 |
|  4 |  683.4 |  683.2 |  683.1 |  5 |  677.3 |  677.5 |  677.5 |
|  6 |  633.4 |  633.5 |  633.9 |  7 |  652.2 |  654.4 |  655.0 |
|  8 |  655.4 |  655.1 |  655.4 |  9 |  654.8 |  654.8 |  654.5 |
| 10 |  672.3 |  671.8 |  671.8 | 11 |  652.7 |  654.7 |  654.5 |
Totals (AMD):  7967.6 7970.4 7970.8 H/s
-----------------------------------------------------------------
Totals (ALL):   7967.6 7970.4 7970.8 H/s
Highest:  7977.6 H/s

List of 12 cards accordingly

0. RX 570 4GB
1. RX 570 8GB
2. RX 570 8GB
3. RX 570 8GB
4. RX 570 8GB
5. RX 570 8GB
6. RX 570 8GB
7. RX 570 4GB
8. RX 570 4GB
9. RX 570 4GB
10. RX 570 8GB
11. RX 570 4GB

I'm surprised that no one else answered your question. If you search online you'll find answers. Try running 2 GPU threads per card, example for GPU 0 and 1 (repeat for all of your cards):

Code:

{ "index" : 0, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 0, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },


{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },

Thanks for noticing it too!   It took for almost weeks my question here is hang and no one try to answer.. Thanks dude i will try you config, and will reply you the result.

Again.. Thanks!

[john1010]

I read some of the xmr stak topic and I saw that they got 800-1000h in their 570 4gb and 8gb cards, I wonder why I only got 600h plus,  I am new to cryptonight algo, since I started mining, I only mined eth and other eth base algo.. can somebody here share some advice below is my settings in amd.txt Is there any way to increase my hashrate.. Thanks in advance to those who are willing to help..    

HASHRATE REPORT - AMD
| ID |    10s |    60s |    15m | ID |    10s |    60s |    15m |
|  0 |  655.1 |  654.4 |  654.7 |  1 |  672.9 |  673.0 |  672.9 |
|  2 |  675.8 |  675.5 |  675.4 |  3 |  682.3 |  682.4 |  682.3 |
|  4 |  683.4 |  683.2 |  683.1 |  5 |  677.3 |  677.5 |  677.5 |
|  6 |  633.4 |  633.5 |  633.9 |  7 |  652.2 |  654.4 |  655.0 |
|  8 |  655.4 |  655.1 |  655.4 |  9 |  654.8 |  654.8 |  654.5 |
| 10 |  672.3 |  671.8 |  671.8 | 11 |  652.7 |  654.7 |  654.5 |
Totals (AMD):  7967.6 7970.4 7970.8 H/s
-----------------------------------------------------------------
Totals (ALL):   7967.6 7970.4 7970.8 H/s
Highest:  7977.6 H/s

List of 12 cards accordingly

0. RX 570 4GB
1. RX 570 8GB
2. RX 570 8GB
3. RX 570 8GB
4. RX 570 8GB
5. RX 570 8GB
6. RX 570 8GB
7. RX 570 4GB
8. RX 570 4GB
9. RX 570 4GB
10. RX 570 8GB
11. RX 570 4GB

I'm surprised that no one else answered your question. If you search online you'll find answers. Try running 2 GPU threads per card, example for GPU 0 and 1 (repeat for all of your cards):

Code:

{ "index" : 0, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 0, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },


{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },

Thanks for noticing it too!   It took for almost weeks my question here is hang and no one try to answer.. Thanks dude i will try you config, and will reply you the result.

Again.. Thanks!

Seems that there something wrong with my config, kindly check my config and tell me if Im doing it right.. My hashrate getting to low..

here's my config I don't know if I'm doing it right.

Code:

"gpu_threads_conf" : [
  // gpu: Ellesmere memory:3920
  // compute units: 32
  { "index" : 0,
    "intensity" : 864, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
{ "index" : 0,
    "intensity" : 864, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3712
  // compute units: 32
  { "index" : 1,
    "intensity" : 864, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
{ "index" : 1,
    "intensity" : 864, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },

Is it right?

[MadKernel]

Based on my esperiencies, the best intensity size is near values obtained using this formula: (num compute units-2) *16 that for a 570 card is 480. Try also 960 for 8gb cards.

[john1010]

Based on my esperiencies, the best intensity size is near values obtained using this formula: (num compute units-2) *16 that for a 570 card is 480. Try also 960 for 8gb cards.

I am using a moded 570/580 and I got 30-31MH mining eth, but in this algo I only got 600H even I tried different intensity but the highest hash I get is 670H, I am currently using 997 intensity.. I will try yours.