[JCE]Fast & stable CN/v8/Heavy/Tube/XHV miner, CPU+GPU, Vega56 1800+ RX580 1200+

[Iamtutut]

No blockchain driver.

[1713487781]

1713487781

[1713487781]

1713487781

[1713487781]

1713487781

[1713487781]

1713487781

[1713487781]

1713487781

[UnclWish]

Hello guys! Could someone help with right .bat and .config? I'd like to test using rig with six RX480 8G, blockch. driver. Thanks in advance)

For proper work of GPU miner it's need Windows 8.1 and higher with 18.3.4 or later driver.

[henri2018]

Hi JCE-Miner,

Please help to add temp and fan speed for each GPU, that information really useful to make sure my GPU not too hot.

Thanks.

Agreed. It really helps us to monitor the GPU temperature and do next action.
So far, I am very happy with JCE miner during trial on one of my rig.
Will see for next 24 hours.
If everything is good (hashrate, temperature, undervolt, overclock), I will switch my other 8 rigs to JCE miner.

Just expect temp and fan speed information on the next release please.

[Frankie001]

how to download the gpu miner, chrome blocks me from downloading, please any advice.

[s0ftcorn]

Very nice. I today tested the miner first time a bit more on my RX580 8GB and it gives good results. At least in the same ball park as cast xmr, which was for me better than srbminer.
Since autoconf is a thing, is there also a cli parameter to disable CPU mining?

how to download the gpu miner, chrome blocks me from downloading, please any advice.

Using chrome too, no problems. Make sure you got no addons installed that do some weird stuff.

[UnclWish]

Very nice. I today tested the miner first time a bit more on my RX580 8GB and it gives good results. At least in the same ball park as cast xmr, which was for me better than srbminer.
Since autoconf is a thing, is there also a cli parameter to disable CPU mining?

Use command line option --no-cpu

[Frankie001]

Very nice. I today tested the miner first time a bit more on my RX580 8GB and it gives good results. At least in the same ball park as cast xmr, which was for me better than srbminer.
Since autoconf is a thing, is there also a cli parameter to disable CPU mining?

how to download the gpu miner, chrome blocks me from downloading, please any advice.

Using chrome too, no problems. Make sure you got no addons installed that do some weird stuff.

thx, found the issue, was norton add on to the browser that was blocking the download.

[JCE-Miner]

hi all,

--no-cpu to disable cpu mining (manual or auto) and its reciprocal --no-gpu (but better use the cpu-only version in such case). thanks Unclwish for the reply.

ok i note the requests about gpu fan/temp, right, but i will add read-only features. it may be damaging to set voltage too high or fan too slow. that's a job for afterburner or overdriventool. but temp/fan read is useful and needed for watchdog.

jce is detected as trojan like every miner, but it contains no malicious code, really.

[henri2018]

hi all,

--no-cpu to disable cpu mining (manual or auto) and its reciprocal --no-gpu (but better use the cpu-only version in such case). thanks Unclwish for the reply.

ok i note the requests about gpu fan/temp, right, but i will add read-only features. it may be damaging to set voltage too high or fan too slow. that's a job for afterburner or overdriventool. but temp/fan read is useful and needed for watchdog.

jce is detected as trojan like every miner, but it contains no malicious code, really.

Nice! Yes, it's just read-only features.
For me, I use overdriventool to do overclock and undervolt, it's ok.

Thanks for your support.

Also, just to inform if no one knows yet.
Just like SRB, running GPU-Z after running JCE-Miner can trigger the hashrate higher.

Here is the steps:
1. Run the miner until you see the miner receives first job from pool.
2. Wait until the console of GPU-Z appear, and then close it.
3. Now, press h to see your hashrate.

Other thing, below the screen shot of the comparison between SRB and JCE Miner, using same pool, same Overdriventool setting.
It is 8x HIS 580 8GB Hynix.
Algo: bittube v2
JCE Miner is higher about 10-20 h/s /card.

https://imgur.com/NfqsMj3

[UnclWish]

hi all,

--no-cpu to disable cpu mining (manual or auto) and its reciprocal --no-gpu (but better use the cpu-only version in such case). thanks Unclwish for the reply.

ok i note the requests about gpu fan/temp, right, but i will add read-only features. it may be damaging to set voltage too high or fan too slow. that's a job for afterburner or overdriventool. but temp/fan read is useful and needed for watchdog.

jce is detected as trojan like every miner, but it contains no malicious code, really.

Nice! Yes, it's just read-only features.
For me, I use overdriventool to do overclock and undervolt, it's ok.

Thanks for your support.

Also, just to inform if no one knows yet.
Just like SRB, running GPU-Z after running JCE-Miner can trigger the hashrate higher.

Here is the steps:
1. Run the miner until you see the miner receives first job from pool.
2. Wait until the console of GPU-Z appear, and then close it.
3. Now, press h to see your hashrate.

Other thing, below the screen shot of the comparison between SRB and JCE Miner, using same pool, same Overdriventool setting.
It is 8x HIS 580 8GB Hynix.
Algo: bittube v2
JCE Miner is higher about 10-20 h/s /card.

https://imgur.com/NfqsMj3

You forgot to point Windows version, drivers version and GPU-Z version to work all of it...

[henri2018]

hi all,

--no-cpu to disable cpu mining (manual or auto) and its reciprocal --no-gpu (but better use the cpu-only version in such case). thanks Unclwish for the reply.

ok i note the requests about gpu fan/temp, right, but i will add read-only features. it may be damaging to set voltage too high or fan too slow. that's a job for afterburner or overdriventool. but temp/fan read is useful and needed for watchdog.

jce is detected as trojan like every miner, but it contains no malicious code, really.

Nice! Yes, it's just read-only features.
For me, I use overdriventool to do overclock and undervolt, it's ok.

Thanks for your support.

Also, just to inform if no one knows yet.
Just like SRB, running GPU-Z after running JCE-Miner can trigger the hashrate higher.

Here is the steps:
1. Run the miner until you see the miner receives first job from pool.
2. Wait until the console of GPU-Z appear, and then close it.
3. Now, press h to see your hashrate.

Other thing, below the screen shot of the comparison between SRB and JCE Miner, using same pool, same Overdriventool setting.
It is 8x HIS 580 8GB Hynix.
Algo: bittube v2
JCE Miner is higher about 10-20 h/s /card.

https://imgur.com/NfqsMj3

You forgot to point Windows version, drivers version and GPU-Z version to work all of it...

Thanks for reminder.
Windows 10 1709
AMD Driver 18.3.4
GPU-Z v2.9.0

[KriptoGuruTR]

Shame I am a strictly Linux GPU miner and can't use this. Using 31a for CPU mining. It is very very stable. The only thing I want is reporting CPU temp with json. A simple txt file read maybe?

[UnclWish]

hi all,

--no-cpu to disable cpu mining (manual or auto) and its reciprocal --no-gpu (but better use the cpu-only version in such case). thanks Unclwish for the reply.

ok i note the requests about gpu fan/temp, right, but i will add read-only features. it may be damaging to set voltage too high or fan too slow. that's a job for afterburner or overdriventool. but temp/fan read is useful and needed for watchdog.

jce is detected as trojan like every miner, but it contains no malicious code, really.

Nice! Yes, it's just read-only features.
For me, I use overdriventool to do overclock and undervolt, it's ok.

Thanks for your support.

Also, just to inform if no one knows yet.
Just like SRB, running GPU-Z after running JCE-Miner can trigger the hashrate higher.

Here is the steps:
1. Run the miner until you see the miner receives first job from pool.
2. Wait until the console of GPU-Z appear, and then close it.
3. Now, press h to see your hashrate.

Other thing, below the screen shot of the comparison between SRB and JCE Miner, using same pool, same Overdriventool setting.
It is 8x HIS 580 8GB Hynix.
Algo: bittube v2
JCE Miner is higher about 10-20 h/s /card.

https://imgur.com/NfqsMj3

You forgot to point Windows version, drivers version and GPU-Z version to work all of it...

Thanks for reminder.
Windows 10 1709
AMD Driver 18.3.4
GPU-Z v2.9.0

This method woudn't work on Windows 10 1803. So it's allready useless...

[heavyarms1912]

Thanks for reminder.
Windows 10 1709
AMD Driver 18.3.4
GPU-Z v2.9.0

what settings did you run the test on?  config for srb and jce.  That can indicate performance diff too.

[henri2018]

Thanks for reminder.
Windows 10 1709
AMD Driver 18.3.4
GPU-Z v2.9.0

what settings did you run the test on?  config for srb and jce.  That can indicate performance diff too.

With JCE, I use auto config for GPU, disabled CPU.
And with SRB, I set intensity to 53 (default is 51 for 580 8gb).

[heavyarms1912]

Thanks for reminder.
Windows 10 1709
AMD Driver 18.3.4
GPU-Z v2.9.0

what settings did you run the test on?  config for srb and jce.  That can indicate performance diff too.

With JCE, I use auto config for GPU, disabled CPU.
And with SRB, I set intensity to 53 (default is 51 for 580 8gb).

56 dual threads works best for SRB.  But yea I get higher hashrate on JCE on tube algo but cn-heavy is the same.

[lebuawu2]

hi all,

--no-cpu to disable cpu mining (manual or auto) and its reciprocal --no-gpu (but better use the cpu-only version in such case). thanks Unclwish for the reply.

ok i note the requests about gpu fan/temp, right, but i will add read-only features. it may be damaging to set voltage too high or fan too slow. that's a job for afterburner or overdriventool. but temp/fan read is useful and needed for watchdog.

jce is detected as trojan like every miner, but it contains no malicious code, really.

Hi JCE,

is it possible to add feature like ping to pool server? with this I guess we can reduce connection timeout from pool server.

Thanks.

[lebuawu2]

Thanks for reminder.
Windows 10 1709
AMD Driver 18.3.4
GPU-Z v2.9.0

what settings did you run the test on?  config for srb and jce.  That can indicate performance diff too.

With JCE, I use auto config for GPU, disabled CPU.
And with SRB, I set intensity to 53 (default is 51 for 580 8gb).

56 dual threads works best for SRB.  But yea I get higher hashrate on JCE on tube algo but cn-heavy is the same.

Yes bittube I got higher hashrate than SRB. RX 580 8GB Micron chipset cclock 1250 mclock 2200 with multi_hash 944 got more than 1150 h/s.
JCE 0.32 Driver 18.3.4 Windows 10 Build 1709.

[lebuawu2]

Hi All,

what is the best setting bittube or heavy for RX Vega 56?

Thanks.

[UnclWish]

Thanks for reminder.
Windows 10 1709
AMD Driver 18.3.4
GPU-Z v2.9.0

what settings did you run the test on?  config for srb and jce.  That can indicate performance diff too.

With JCE, I use auto config for GPU, disabled CPU.
And with SRB, I set intensity to 53 (default is 51 for 580 8gb).

56 dual threads works best for SRB.  But yea I get higher hashrate on JCE on tube algo but cn-heavy is the same.

59 works better... On JCE 944 now better than 832 or 864. But speed on JCE jumps up and down to much... About 100 h/s up/down...