klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 02:48:17 PM |
|
I just received another S1 today and this one was used big time. Lots of Chinese dust all over the PCB boards and fan blades. Should I contact them and have them replace it?
Also might be a sign of things running out and new model coming out.
You are lucky that your S1 works. I received heavily used and semi-dead S1 from them. All covered in dust, heavy smell of burnt electronics, a lot of dead chips - one blade shows 8 ASICs instead of 32. It hashes only at around 120 GH/s and sometimes just stops hashing with beeping sound, needs power cycle to start again. I paid 130 euros customs tax for this unit, and it would cost around 200 euros to ship it back to Bitmain and then I have to pay another 130 euros to customs for the replacement unit. Just does not worth it. So Bitmain sold me a dead unit and now just stopped responding to my messages. you don't pay nothing to send it back, they will pay, and they will ship you a new one, if what you told is true, u make a photo and a screenshot. else i don't belive you at all. they have 10000 of customers, and no one point that(one blade shows 8 ASICs instead of 32), you are the first one. or, you didn't buy from https://www.bitmaintech.com , and you got scamed. My guess is that the power regulator (TPS53355) or its associated power components for the second 'segment' of the bad board died - this would result in no 1.1V signal to the chips or across the inductor, and would likely stop the communication chain to the 3rd/4th segments. I had that happy to the first segment on one of my boards, and no chips on the entire board hashed. Bitmain took a few days to decide on what to do, and then mailed me a replacement PCB alongside my order for another antminer. I swapped the boards (the thermal paste application needed some work at the time, but seems fixed now since antminers all come with it oozing out) and mailed back my bad PCB at thier expense.
|
|
|
|
jedimstr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 03:09:41 PM |
|
Hi, I just order one at Wednesday evenning my time. Today I received my shipment information with estimated delivery on next Tuesday ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) . I can confirm fast shipment and looking forward to confirm that my Antminer is working well. As I am preparing and reading here and around and in web installations tips. Shell I check for thermal grease as someone reffer to have a lot on the circuits? Any tip to follow before first power-on? I have purchased good PSU - EVGA SuperNOVA NEX650G I have my LAN using 255.255.0.0 subnet - I am a little bit confused when I see in management system of Antminer sections/menu LAN and WAN - any reason for that? My WAN is a at Gateway and I do not care about any setting. Thank you for any tip. The control board on the S1 is a customized router running OpenWRT so you use the WAN settings on the board to connect to your LAN. Don't get stuck on the terminology ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) The LAN settings are essentially going to point to nothing (no hardware port) and the WiFi settings essentially bridge to the S1's WAN connection. So basically modify the S1's WAN settings (ignoring that it's called WAN) as if you were setting up any other hardware on your network.
|
|
|
|
jasper1000
Newbie
Offline
Activity: 24
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 03:27:24 PM |
|
S2 is available 1TH 6.12 BTC
|
|
|
|
meornot69
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 87
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 04:09:28 PM |
|
yep look awesome, and psu is included AntMiner S2 SPEC: * Hash rate: more than 1,000GH/s * Power consumption: 1,000W from the wall * Power efficiency: 1Watt/GH/s * PSU: 1000W produced by Enermax, 80PLUS gold * 4U Rack * PSU inside * Plug and Mining * Stable and quiet
|
|
|
|
jedimstr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 04:15:16 PM |
|
No pictures yet of the production unit... just broken img on the site. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) The prototype bare metal box that bobsag3 posted on the other thread doesn't count... I doubt that represents how the S2 will look in the shipped production units. Then again... the S1 wasn't exactly a looker either...
|
|
|
|
herebittybittybitty
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 04:20:09 PM |
|
ARGH! Does anyone know what hours Bitmaintech keeps? I accidentally sent too many bitcoins to them... and I need them back for a different order from them. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
meornot69
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 87
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 04:27:10 PM |
|
No pictures yet of the production unit... just broken img on the site. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) The prototype bare metal box that bobsag3 posted on the other thread doesn't count... I doubt that represents how the S2 will look in the shipped production units. Then again... the S1 wasn't exactly a looker either... S2 pictures: https://bitcointalk.org/index.php?topic=515448.msg5694875#msg5694875
|
|
|
|
jedimstr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 05:02:50 PM |
|
No pictures yet of the production unit... just broken img on the site. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) The prototype bare metal box that bobsag3 posted on the other thread doesn't count... I doubt that represents how the S2 will look in the shipped production units. Then again... the S1 wasn't exactly a looker either... S2 pictures: https://bitcointalk.org/index.php?topic=515448.msg5694875#msg5694875Read my post again... bobsag3 posted that picture of the PROTOTYPE. We wanna see pics of the actual production units... jeez, I even specifically mentioned this photo in my post. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 05:10:39 PM |
|
No pictures yet of the production unit... just broken img on the site. The prototype bare metal box that bobsag3 posted on the other thread doesn't count... I doubt that represents how the S2 will look in the shipped production units. Then again... the S1 wasn't exactly a looker either... S2 pictures: https://bitcointalk.org/index.php?topic=515448.msg5694875#msg5694875lol
|
|
|
|
meornot69
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 87
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 05:12:29 PM |
|
No pictures yet of the production unit... just broken img on the site. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) The prototype bare metal box that bobsag3 posted on the other thread doesn't count... I doubt that represents how the S2 will look in the shipped production units. Then again... the S1 wasn't exactly a looker either... S2 pictures: https://bitcointalk.org/index.php?topic=515448.msg5694875#msg5694875Read my post again... bobsag3 posted that picture of the PROTOTYPE. We wanna see pics of the actual production units... jeez, I even specifically mentioned this photo in my post. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) yeah mate, sry, but i really think this is how it will look.
|
|
|
|
DeezNutzz
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 05:24:00 PM |
|
Newb here. I have one S1, and thinking about getting a second.
I am using one CX500 PSU. should i just get another CX500 for the second unit, or go for a single higher wattage PSU and use it for both?
|
|
|
|
Syke
Legendary
Offline
Activity: 3878
Merit: 1193
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 05:24:39 PM |
|
yeah mate, sry, but i really think this is how it will look.
They say it's a 4U case. Other than that, I couldn't care less how it looks. It's not going to be sitting on my coffee table. It's going to be buried in closet/hosting facility.
|
Buy & Hold
|
|
|
jedimstr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 05:32:16 PM |
|
No pictures yet of the production unit... just broken img on the site. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) The prototype bare metal box that bobsag3 posted on the other thread doesn't count... I doubt that represents how the S2 will look in the shipped production units. Then again... the S1 wasn't exactly a looker either... S2 pictures: https://bitcointalk.org/index.php?topic=515448.msg5694875#msg5694875Read my post again... bobsag3 posted that picture of the PROTOTYPE. We wanna see pics of the actual production units... jeez, I even specifically mentioned this photo in my post. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) yeah mate, sry, but i really think this is how it will look. It could be ugly as hell, but it won't look like that... not if they are serious about saying it's a 4U rackmount case. The prototype looks much bigger than 4U.
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 05:33:51 PM |
|
yeah mate, sry, but i really think this is how it will look.
obviously its a prototype, for a few reasons: 1) a paintjob would be cheap, protective, and look good (but KNC skipped this, so maybe not) 2) it has no connectors for a rack frame yet 3) there is a fan on top? If these are stacked in a rack, that fan would be absolutely useless unless the box also has a hole in the bottom for some crazy vertical airflow concept
|
|
|
|
stan258
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 07:43:28 PM |
|
yeah mate, sry, but i really think this is how it will look.
obviously its a prototype, for a few reasons: 1) a paintjob would be cheap, protective, and look good (but KNC skipped this, so maybe not) 2) it has no connectors for a rack frame yet 3) there is a fan on top? If these are stacked in a rack, that fan would be absolutely useless unless the box also has a hole in the bottom for some crazy vertical airflow concept What about the 1000W with 1000W PSU. An option to ship without PSU?.
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 08:34:36 PM |
|
yeah mate, sry, but i really think this is how it will look.
obviously its a prototype, for a few reasons: 1) a paintjob would be cheap, protective, and look good (but KNC skipped this, so maybe not) 2) it has no connectors for a rack frame yet 3) there is a fan on top? If these are stacked in a rack, that fan would be absolutely useless unless the box also has a hole in the bottom for some crazy vertical airflow concept What about the 1000W with 1000W PSU. An option to ship without PSU?. The 1000W power number could come from anywhere. 1) 1000W at the wall means a draw of 880-920W 2) 1000W unit would need about 1100-1200W PSU for some overhead 3) 1000W PSU could run 900W of miners easily
|
|
|
|
noise23
Legendary
Offline
Activity: 968
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 09:20:22 PM |
|
I just received another S1 today and this one was used big time. Lots of Chinese dust all over the PCB boards and fan blades. Should I contact them and have them replace it?
Also might be a sign of things running out and new model coming out.
You are lucky that your S1 works. I received heavily used and semi-dead S1 from them. All covered in dust, heavy smell of burnt electronics, a lot of dead chips - one blade shows 8 ASICs instead of 32. It hashes only at around 120 GH/s and sometimes just stops hashing with beeping sound, needs power cycle to start again. I paid 130 euros customs tax for this unit, and it would cost around 200 euros to ship it back to Bitmain and then I have to pay another 130 euros to customs for the replacement unit. Just does not worth it. So Bitmain sold me a dead unit and now just stopped responding to my messages. you don't pay nothing to send it back, they will pay, and they will ship you a new one, if what you told is true, u make a photo and a screenshot. else i don't belive you at all. they have 10000 of customers, and no one point that(one blade shows 8 ASICs instead of 32), you are the first one. or, you didn't buy from https://www.bitmaintech.com , and you got scamed. you don't pay nothing to send it back, they will pay, and they will ship you a new one, if what you told is true, u make a photo and a screenshot.
Bitmain told me that I have to ship it back by myself. I've sent them a photo / screenshot. else i don't belive you at all.
I don't care if you believe me or not. they have 10000 of customers, and no one point that(one blade shows 8 ASICs instead of 32), you are the first one.
I'm not the first one, if you read Antiminer topics at this forum you will find people with similar problem - dead chips. I bought 5 units directly from them. 3 were new and good, one was used but good and another one used and defective.
|
|
|
|
noise23
Legendary
Offline
Activity: 968
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 09:39:24 PM |
|
I just received another S1 today and this one was used big time. Lots of Chinese dust all over the PCB boards and fan blades. Should I contact them and have them replace it?
Also might be a sign of things running out and new model coming out.
You are lucky that your S1 works. I received heavily used and semi-dead S1 from them. All covered in dust, heavy smell of burnt electronics, a lot of dead chips - one blade shows 8 ASICs instead of 32. It hashes only at around 120 GH/s and sometimes just stops hashing with beeping sound, needs power cycle to start again. I paid 130 euros customs tax for this unit, and it would cost around 200 euros to ship it back to Bitmain and then I have to pay another 130 euros to customs for the replacement unit. Just does not worth it. So Bitmain sold me a dead unit and now just stopped responding to my messages. 1) screenshot? 2) what is your PSU - dead chips and rebooting are common signs that your PSU is a bit too weak (you need one rated 550W+ with at least 500W on the 12V rail to run properly) 1) here is the photo of my monitor screen2) I run it with Corsair RM850. It's a pretty good PSU, I have another two of them powering two Ants S1 each without problems. Actually I don't care much just was sort of disappointed when paid heavy customs tax for this unit only to find that it's all dusty and semi-burnt.
|
|
|
|
varakunai
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 72
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2014, 11:40:49 PM |
|
1) here is the photo of my monitor screen2) I run it with Corsair RM850. It's a pretty good PSU, I have another two of them powering two Ants S1 each without problems. Actually I don't care much just was sort of disappointed when paid heavy customs tax for this unit only to find that it's all dusty and semi-burnt. Have you tried running it with another PSU? I use 2 HX850s to power 3, and i was getting a sleu X on chips when i was running two on 1 PSU. Try getting a 550W + PSU with 2 12v rails and PCI cables that arn't split and see if some of those Xs go away. Remember to run the unit for a while because the X has taken at least 5 min to update on me before. Also, try SSH into and and lower the clock setting in the asic-freq file located at /etc/config You seem to know stuff, but just in case any noobs need a tip here is how to do the freq adjustment. Start with the lowest setting, and let it mine for about 10 min before you trust the X count. If all work move to the next freq settings. Download Putty, and connect SSH to your miner via its IP address type "cd /etc/config" to get to the proper place type "vi asic-freq" to open the file you need to change Hit "i" to enter edit mode using arrows keys, move to the freq you want to use, and remove the # in from of all three lines. move to the activated freq (one without #) and add the # in front of each line Hit the escape key to leave edit mode type ":x" and hit enter type exit to leave putty log into your miner via browser and apply settings on the miner config page to change to the new freq. I own 12 S1s and have had plenty of time to troubleshoot problems, if you need more help don't hesitate to ask me in a PM. If i helped anyone that wants to tip, please donate to the Against Hunger Foundation ( http://againsthunger.org) Their BTC addy is 16EUDLfnDuQnFt9BviqpURHPpaa5oFxN2n They do really good work and could use the funding!
|
|
|
|
noise23
Legendary
Offline
Activity: 968
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 15, 2014, 01:00:51 AM |
|
Have you tried running it with another PSU? I use 2 HX850s to power 3, and i was getting a sleu X on chips when i was running two on 1 PSU. Try getting a 550W + PSU with 2 12v rails and PCI cables that arn't split and see if some of those Xs go away. Remember to run the unit for a while because the X has taken at least 5 min to update on me before. Also, try SSH into and and lower the clock setting in the asic-freq file located at /etc/config You seem to know stuff, but just in case any noobs need a tip here is how to do the freq adjustment. Start with the lowest setting, and let it mine for about 10 min before you trust the X count. If all work move to the next freq settings. Download Putty, and connect SSH to your miner via its IP address type "cd /etc/config" to get to the proper place type "vi asic-freq" to open the file you need to change Hit "i" to enter edit mode using arrows keys, move to the freq you want to use, and remove the # in from of all three lines. move to the activated freq (one without #) and add the # in front of each line Hit the escape key to leave edit mode type ":x" and hit enter type exit to leave putty log into your miner via browser and apply settings on the miner config page to change to the new freq. I own 12 S1s and have had plenty of time to troubleshoot problems, if you need more help don't hesitate to ask me in a PM. If i helped anyone that wants to tip, please donate to the Against Hunger Foundation ( http://againsthunger.org) Their BTC addy is 16EUDLfnDuQnFt9BviqpURHPpaa5oFxN2n They do really good work and could use the funding! Also tried it with Delta DPS-2000BB server PSU, all the same. Didn't try to underclock it yet. Wanted to play with underclocking anyway, I wondering if it possible to make S1 more power efficient. It would be great to achieve S2 power efficiency with S1 units as their price goes down and difficulty goes up, but probably it would require undervoltage too? Thanks!
|
|
|
|
|