2.1T 900W, Innosilicon Blake256 D9 DecredMaster/ 3.83T 1380W, S11 SiaMaster

[Inno_ASIC]

I should be receiving my D9 today! FedEx tracking shows it’s in town.

Let us know how it goes..

• Order ID: D9INNO2018042417
• Paid in BTC within 30 minutes on April 23rd.
• Payment confirmed on April 28th.
• May 2nd received the following: "It's still waiting to be shipped"

So far, 10 days since making payment and still don't have a tracking number.

@Inno_ASIC can you please give an update on this order's status? I pre-ordered and paid in full. I received your payment confirmation, but I have not received any updates about shipping /tracking number.

Thank you for your support.

OK. We will check and reply you asap.

[chris-swiss]

Surprise, surprise!!! but not really.

Plugged in the D9, scanned for IP and lookie there - DragonMint. Typed in the IP address and the DragonMint GUI appears.

Followed the Luxor directions to add the DragonMint B29, entered the worker which looks like a wallet address followed by .whateveryouwanttocallit

Entered the worker (wallet) address on the Search bar on Luxor, once connected, pulled up statistics and it immediately had an unpaid balance as well as Paid Rewards of 1.17 DCR. Miner Reward Transactions has payments processed 13 days ago and a few payments a month ago. I presume this is the "testing" that occurred with this miner but who would have guessed on Luxor's pool. More importantly, this would tell me that this worker (wallet) address does not belong to me and needs to be changed.

If this worker (wallet) address belongs to someone else (Innosilicon), I need to change the worker name to my address I created on Decrediton, right? I don't see an option to set a payment wallet address so I'm assuming you have to configure the miner to your wallet so you're not mining free coins to someone else.  

Can someone please confirm if I need to change the worker name under Settings / Pools? Or what I need to do, thanks in advance.  

Yes. You want to align your miners to your account (For instance, mine are Dimaze.001, Dimaze.002, ect), the payout address in the account settings is the one the pool pays out to.

Happy mining

Couldn't get it connected to Luxor pool for some reason. Followed their instructions and updated the worker name to my DCR wallet address and it wouldn't connect but I'm connected to Coinmine just fine.

What's your average hash rate for your miners?

for me its turn to 1,94 at 1,96 with performance setting

[KashHappy]

Hello ,

Have one question for power cable to PSU its same to bitmain power cable you use?  thanks for help me, its my first order with this company and have take D9 Inno received today.

I have looking to innosilicon and its writing standard IEC C14 AC power cable. Its male or female to take ?
thanks for your time

https://www.ldlc.ch/fiche/PB00214152.html

It uses the exact same power cable as bitmain, same connector.

[KashHappy]

Surprise, surprise!!! but not really.

Plugged in the D9, scanned for IP and lookie there - DragonMint. Typed in the IP address and the DragonMint GUI appears.

Followed the Luxor directions to add the DragonMint B29, entered the worker which looks like a wallet address followed by .whateveryouwanttocallit

Entered the worker (wallet) address on the Search bar on Luxor, once connected, pulled up statistics and it immediately had an unpaid balance as well as Paid Rewards of 1.17 DCR. Miner Reward Transactions has payments processed 13 days ago and a few payments a month ago. I presume this is the "testing" that occurred with this miner but who would have guessed on Luxor's pool. More importantly, this would tell me that this worker (wallet) address does not belong to me and needs to be changed.

If this worker (wallet) address belongs to someone else (Innosilicon), I need to change the worker name to my address I created on Decrediton, right? I don't see an option to set a payment wallet address so I'm assuming you have to configure the miner to your wallet so you're not mining free coins to someone else.  

Can someone please confirm if I need to change the worker name under Settings / Pools? Or what I need to do, thanks in advance.  

Yes. You want to align your miners to your account (For instance, mine are Dimaze.001, Dimaze.002, ect), the payout address in the account settings is the one the pool pays out to.

Happy mining

Couldn't get it connected to Luxor pool for some reason. Followed their instructions and updated the worker name to my DCR wallet address and it wouldn't connect but I'm connected to Coinmine just fine.

What's your average hash rate for your miners?

Hello thank you for your feedback.

Did your problem has been solved ?

You can find Innosilicon D9 Manual from http://www.innosilicon.com.cn/api/download.php?url=D9-DCR-manual-en.pdf

Feel free to contact miner_support@innosilicon.com.cn if you have technical problem. Thank you.

I couldnt ever get it connected to Luxor pool but had no problems connecting to coinmine. Thanks for providing the link to the manual. I’ll have to check it out.

[chris-swiss]

thanks KashHappy for answer

[chris-swiss]

Surprise, surprise!!! but not really.

Plugged in the D9, scanned for IP and lookie there - DragonMint. Typed in the IP address and the DragonMint GUI appears.

Followed the Luxor directions to add the DragonMint B29, entered the worker which looks like a wallet address followed by .whateveryouwanttocallit

Entered the worker (wallet) address on the Search bar on Luxor, once connected, pulled up statistics and it immediately had an unpaid balance as well as Paid Rewards of 1.17 DCR. Miner Reward Transactions has payments processed 13 days ago and a few payments a month ago. I presume this is the "testing" that occurred with this miner but who would have guessed on Luxor's pool. More importantly, this would tell me that this worker (wallet) address does not belong to me and needs to be changed.

If this worker (wallet) address belongs to someone else (Innosilicon), I need to change the worker name to my address I created on Decrediton, right? I don't see an option to set a payment wallet address so I'm assuming you have to configure the miner to your wallet so you're not mining free coins to someone else.  

Can someone please confirm if I need to change the worker name under Settings / Pools? Or what I need to do, thanks in advance.  

Yes. You want to align your miners to your account (For instance, mine are Dimaze.001, Dimaze.002, ect), the payout address in the account settings is the one the pool pays out to.

Happy mining

Couldn't get it connected to Luxor pool for some reason. Followed their instructions and updated the worker name to my DCR wallet address and it wouldn't connect but I'm connected to Coinmine just fine.

What's your average hash rate for your miners?

Hello thank you for your feedback.

Did your problem has been solved ?

You can find Innosilicon D9 Manual from http://www.innosilicon.com.cn/api/download.php?url=D9-DCR-manual-en.pdf

Feel free to contact miner_support@innosilicon.com.cn if you have technical problem. Thank you.

I couldnt ever get it connected to Luxor pool but had no problems connecting to coinmine. Thanks for providing the link to the manual. I’ll have to check it out.

You have set up on luxor
https://medium.com/@LuxorTechTeam/halong-dragonmint-b29-decred-setup-guide-18c081e85c0b

and your writing

Worker: YourDecredAddress.username

To find your user , simply go to decred.luxor.tech and type in your wallet address at the top of the searchbar.
make just your wallet address without username.
I hope it will help you

[dhouse]

How hot and loud does this run? Could I run one of them in my basement comfortably?

[spartadata]

@Inno_ASIC

Order ID D9INNO2018042617
Order Placed on 4/25/18
Payment Confirmation Received on 4/26/18
7 Days past since payment was confirmed!

When Tracking Number and shipment of my units?
Whats the delay?!

[philipma1957]

How hot and loud does this run? Could I run one of them in my basement comfortably?

1400 watts and pretty loud.

[KashHappy]

Surprise, surprise!!! but not really.

Plugged in the D9, scanned for IP and lookie there - DragonMint. Typed in the IP address and the DragonMint GUI appears.

Followed the Luxor directions to add the DragonMint B29, entered the worker which looks like a wallet address followed by .whateveryouwanttocallit

Entered the worker (wallet) address on the Search bar on Luxor, once connected, pulled up statistics and it immediately had an unpaid balance as well as Paid Rewards of 1.17 DCR. Miner Reward Transactions has payments processed 13 days ago and a few payments a month ago. I presume this is the "testing" that occurred with this miner but who would have guessed on Luxor's pool. More importantly, this would tell me that this worker (wallet) address does not belong to me and needs to be changed.

If this worker (wallet) address belongs to someone else (Innosilicon), I need to change the worker name to my address I created on Decrediton, right? I don't see an option to set a payment wallet address so I'm assuming you have to configure the miner to your wallet so you're not mining free coins to someone else.  

Can someone please confirm if I need to change the worker name under Settings / Pools? Or what I need to do, thanks in advance.  

Yes. You want to align your miners to your account (For instance, mine are Dimaze.001, Dimaze.002, ect), the payout address in the account settings is the one the pool pays out to.

Happy mining

Couldn't get it connected to Luxor pool for some reason. Followed their instructions and updated the worker name to my DCR wallet address and it wouldn't connect but I'm connected to Coinmine just fine.

What's your average hash rate for your miners?

Hello thank you for your feedback.

Did your problem has been solved ?

You can find Innosilicon D9 Manual from http://www.innosilicon.com.cn/api/download.php?url=D9-DCR-manual-en.pdf

Feel free to contact miner_support@innosilicon.com.cn if you have technical problem. Thank you.

I couldnt ever get it connected to Luxor pool but had no problems connecting to coinmine. Thanks for providing the link to the manual. I’ll have to check it out.

You have set up on luxor
https://medium.com/@LuxorTechTeam/halong-dragonmint-b29-decred-setup-guide-18c081e85c0b

and your writing

Worker: YourDecredAddress.username

To find your user , simply go to decred.luxor.tech and type in your wallet address at the top of the searchbar.
make just your wallet address without username.
I hope it will help you

Thanks Chris. These are the steps I followed but could not connect for some reason. Left it running with the Luxor pool setting for a good 20 minutes and no dice.

[staineddreserved7]

They are setting it firmly and I must wait for the prices to drop and then purchase.

[REAL_MORPHEUS]

Paid, confirmed etc....

Tracking number issued (created online by Innosilicon says DHL) on April 28th 2018

Tracking number says still in Hong Kong

Emailed Innosilicon with tracking number and they state DHL has it.

Phoned DHL and asked whats going on....

DHL states Innosilcon failed to bring the package(s) for delivery to DHL on April 28th and have yet to bring them the package.

DHL states they do not have the package as of May 03 2018 (GMT -8)  11:03 am

Summary:

Money/crypto accepted and confirmed with a phantom online tracking number that hasn't had any package physically delivered or associated with it.

INNOSILICON HAS NOT SHIPPED THE UNIT

[Voltar]

On time shipping?!  


You are lucky if they don't loose the payment information on the entire shipment!  That is what happened to me a lot of other buyers as well.  I would rather chew my arm off than go  through that again!

[cyberdeity]

One of my 4 is not working, but the other 3 are humming along nicely.

Roughly 22 hours in the Luxor pool and already 6710 SC mined which is roughly $193 in revenue.  And from what I understand about PPLNS pools like Luxor, there is a "ramp up" period in the sharechain so you don't get full rewards until after 24 hours in the pool to prevent pool hopping so it's possible to earn even more if the pool is lucky on finding blocks.  It's always a trade-off against PPS pools like siamining - those pools have more steady income.  Not sure I'll stay at Luxor or not but liking it so far, good timing I guess!

Here's a link below if anyone is curious and was thinking of pointing their S11 at Luxor.  Btw, Luxor is currently 0% fees for SC, compared to 3% at siamining.  That may not sound like much but that is almost two hundred bucks a month if you have 4 of these, it adds up quick!

http://mining.luxor.tech/miners/SC/8110422ebe4927b4e60837c820e455071171554e68b28ec7cc5204f91ce770fa2beebc351fd3

[MaxiMaxRS]

What the hell is going on with Innosilicon and its Dolar-BTC conversion?
Innosilicon D9: USD 6800 / 0.792496 BTC
0.792496 BTC: USD 7750 !!! Almost 15% more expensive for payment in BTC and accuse the currency that is "unstable"
- If I had bought last night they received Bitcoin at a value of $ 9,200 and today it is worth $ 9,800! What is the "loss" they can have? That is to take advantage of the clients, try to make a more logical conversion, maybe $ 100 or 200 more expensive but not $ 1000. One pays more and the profitability is falling, passing from $ 220 to $ 160 and today to $ 130.

[Inno_ASIC]

Paid, confirmed etc....

Tracking number issued (created online by Innosilicon says DHL) on April 28th 2018

Tracking number says still in Hong Kong

Emailed Innosilicon with tracking number and they state DHL has it.

Phoned DHL and asked whats going on....

DHL states Innosilcon failed to bring the package(s) for delivery to DHL on April 28th and have yet to bring them the package.

DHL states they do not have the package as of May 03 2018 (GMT -8)  11:03 am

Summary:

Money/crypto accepted and confirmed with a phantom online tracking number that hasn't had any package physically delivered or associated with it.

INNOSILICON HAS NOT SHIPPED THE UNIT

Could you please give your order ID to me? We will check and reply you asap.

[spartadata]

WHEN WILL IT SHIP?? ORDER ID D9INNO2018042617

[Kmmille2]

I should be receiving my D9 today! FedEx tracking shows it’s in town.

Let us know how it goes..

• Order ID: D9INNO2018042417
• Paid in BTC within 30 minutes on April 23rd.
• Payment confirmed on April 28th.
• May 2nd received the following: "It's still waiting to be shipped"

So far, 10 days since making payment and still don't have a tracking number.

@Inno_ASIC can you please give an update on this order's status? I pre-ordered and paid in full. I received your payment confirmation, but I have not received any updates about shipping /tracking number.

Same here. Purchased 2 D9's. Paid over $15,000k USD. Inno has confirmed that they have my payment but still has not sent the miners. No tracking number.

Profitability has gone down rapidly since ordering.

@inno_asic why are you unable to provide a tracking number or ship the units? You've had my money for weeks now. I'm being told "be patient" - the unit was advertised to ship on April 27th and it's now May 4th. Your customers are frustrated and we are losing money that we could have had in the market.

[Swayzeee]

Come use your D9's or dragonmints on our small pool 1% fee and no hash hoarding.
Just put up today 40thz and growing.
 www.minertopia.org  for details we've been around forever.

[maczeobit]

@Inno_ASIC could you please help me troubleshoot my D9 that I received today. 1 hashing board is not working