dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
March 29, 2014, 10:55:40 PM |
|
never pinged before what are the values to enter I saw the option your talking about but wasn't sure what to enter
If you want to ping 192.168.1.50 for example: ping 192.168.1.50 So I want to ping my IP for the s1? If you're trying to see if its there then yes, I don't know what you're trying to do.
|
|
|
|
AngusCanine
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 29, 2014, 11:14:56 PM |
|
never pinged before what are the values to enter I saw the option your talking about but wasn't sure what to enter
If you want to ping 192.168.1.50 for example: ping 192.168.1.50 So I want to ping my IP for the s1? If you're trying to see if its there then yes, I don't know what you're trying to do. That's what I was trying , so I pinged the address it sent back information seemed like it found something. So the underlying issue is that I'm not mining I've configured the miner but maybe its not configured right (stratum+tcp://stratum.bit coin.cz:3333 does this look right for the pool info. I'm lost I don't understand why its not working
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
March 29, 2014, 11:30:12 PM |
|
never pinged before what are the values to enter I saw the option your talking about but wasn't sure what to enter
If you want to ping 192.168.1.50 for example: ping 192.168.1.50 So I want to ping my IP for the s1? If you're trying to see if its there then yes, I don't know what you're trying to do. That's what I was trying , so I pinged the address it sent back information seemed like it found something. So the underlying issue is that I'm not mining I've configured the miner but maybe its not configured right (stratum+tcp://stratum.bit coin.cz:3333 does this look right for the pool info. I'm lost I don't understand why its not working You've got a space in that address
|
|
|
|
AngusCanine
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 29, 2014, 11:34:48 PM |
|
never pinged before what are the values to enter I saw the option your talking about but wasn't sure what to enter
If you want to ping 192.168.1.50 for example: ping 192.168.1.50 So I want to ping my IP for the s1? If you're trying to see if its there then yes, I don't know what you're trying to do. That's what I was trying , so I pinged the address it sent back information seemed like it found something. So the underlying issue is that I'm not mining I've configured the miner but maybe its not configured right (stratum+tcp://stratum.bit coin.cz:3333 does this look right for the pool info. I'm lost I don't understand why its not working You've got a space in that address Yeah that's just auto correction bigger problems now I changed the lan to static IP now I can't access the the Interface after a reboot?
|
|
|
|
AngusCanine
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 29, 2014, 11:40:18 PM |
|
computer says miners online but isn't responding to connection attempts
|
|
|
|
AngusCanine
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 29, 2014, 11:41:46 PM |
|
How do I reset the miner back to factory
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
March 29, 2014, 11:44:41 PM |
|
How do I reset the miner back to factory
There's a physical button on the control board.
|
|
|
|
AngusCanine
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 29, 2014, 11:58:32 PM |
|
How do I reset the miner back to factory
There's a physical button on the control board. Found it pressed it now green led is is blinking fast
|
|
|
|
AngusCanine
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 30, 2014, 12:00:59 AM |
|
How do I reset the miner back to factory
There's a physical button on the control board. Found it pressed it now green led is is blinking fast So is the IP set back to factory now
|
|
|
|
AngusCanine
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 30, 2014, 12:22:55 AM |
|
How do I reset the miner back to factory
There's a physical button on the control board. Found it pressed it now green led is is blinking fast So is the IP set back to factory now It is now back to factory........Round two.....lol
|
|
|
|
AngusCanine
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 30, 2014, 04:12:39 PM Last edit: March 31, 2014, 12:23:18 PM by AngusCanine |
|
pools are alive but getting zero hashrate, few getworks some discarded and I cant see my worker in my pool hash rate is zero, no antminer stats??? any ideas
|
|
|
|
GiLa
Newbie
Offline
Activity: 44
Merit: 0
|
|
March 31, 2014, 03:07:56 PM |
|
For those Ant's S1 who are living in Australia, I wanted to find an alternative other than using Corsair.
I wanted to power 2xS1's and from what I read, I needed a PSU that could deliver more than 32amps per S1 if I wanted to overclock it.
As from previous posts on the forum, most people went for Corsairs AX-1200 which I found the cheapest at AUD$350 or RM-1000 for just under AUD$250
Seasonic's were bit more pricey but as most people know they make damn good power supplies.
So wanting something made by Seasonic I decided to get the Cooler Master V1000 from what I read, it is built by Seasonic and it provides a single 12v rail delivering a total of 83Amps or 996watts. This can be picked up at for less than AUD$240
Another option would be to get a FSP Aurum Gold 1000 for less than AUD$220, however don't know how good they will perform.
|
|
|
|
Lucky7Gaming
Member
Offline
Activity: 87
Merit: 10
|
|
March 31, 2014, 09:57:38 PM |
|
I setup my miner with a direct ethernet link and it worked fine. Then when I connect it to my router it doesn't come up on my router config page. It doesn't seem to be mining. What could be the problem. I used DCHP for the Lan settings....... Thanks in advance!
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
April 01, 2014, 02:25:52 AM |
|
I setup my miner with a direct ethernet link and it worked fine. Then when I connect it to my router it doesn't come up on my router config page. It doesn't seem to be mining. What could be the problem. I used DCHP for the Lan settings....... Thanks in advance!
Pool info not set in the correct format.
|
|
|
|
thegoldbug
Member
Offline
Activity: 90
Merit: 10
|
|
April 01, 2014, 06:02:53 PM |
|
I just got two AntMiner S1s today. One had a capacitor broken off but it was in the box. I'm going to try and solder it on later today.
My problem is that no what what combination of my two pools I enter, the miner won't mine on them. If I do a factory reset (press the button), the miner will mine on/using Bitmain's accounts (and I'm sure they would appreciate that).
I've spent the last two hours looking at websites and I cant figure out what I'm doing wrong.
The miner was beeping and I found that means it was not connecting to the pools.
The miner is currently not beeping so I don't know what that means because it currently is also not mining.
Is there anything wrong with these two pool entries?
stratum+tcp://stratum.mining.eligius.st:3334
Or
stratum.bitcoin.cz:3333
thanks
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
April 01, 2014, 06:14:43 PM |
|
Try a different pool: stratum+tcp://eu-stratum.btcguild.com:3333
|
|
|
|
thegoldbug
Member
Offline
Activity: 90
Merit: 10
|
|
April 01, 2014, 07:17:39 PM |
|
Thanks for the suggestion and motivation.
Believe it or not that was not straightforward either. I did another reset to prove again that it would mine on the original settings.
After multiple entries I did finally get it to mine on BTC Guild. Something is very strange with those input panels.....
I would still like to see someones setting for eligius or slushes pool so I have some backups.
thanks again.
|
|
|
|
Jacko
|
|
April 01, 2014, 07:26:06 PM |
|
This is copy and pasted from my Ant for Eligius pool.
stratum+tcp://stratum.mining.eligius.st:3334
It is the same as yours in your post, so it should be ok. Just make sure you have no white space before or after that info. Try completely wiping it out and typing it in manually not copy / paste as white space before on one of mine stopped it mining
The username should be your BTC payment receiving address. You also have to put a password in but anything from 0 to 9 is ok.
You should be good to go.
Save changes and apply and you might find a wait of up to one and a half minutes is not uncommon to start mining and flashing the green led surface mounted on each blade. Eligius seems to take longer to mine than my Ants on Bitminter. Sometimes with a new Ant Eligius has taken one and a half minutes to start mining and then stopped after about a minute. Just leave it and it will start again then it may stop. It mines longer each time and then after half an hour it is fine.
This works for me. It may not be getting work quick enough from Eligius or something I'm not sure. Just give it a while.
|
|
|
|
Lucky7Gaming
Member
Offline
Activity: 87
Merit: 10
|
|
April 01, 2014, 09:07:18 PM |
|
I setup my miner with a direct ethernet link and it worked fine. Then when I connect it to my router it doesn't come up on my router config page. It doesn't seem to be mining. What could be the problem. I used DCHP for the Lan settings....... Thanks in advance!
Pool info not set in the correct format. Oh...Thanks Dogie!!!
|
|
|
|
thegoldbug
Member
Offline
Activity: 90
Merit: 10
|
|
April 01, 2014, 09:14:28 PM |
|
Thanks. I know have BTC guild and Eligius pools set up and working.
It seemed to work best for me if I used TAB to move to the next input box instead of the ENTER key.
I might have not been waiting long enough for Eligius to show any work also.
thanks again.
|
|
|
|
|