taj
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 12:37:48 AM Last edit: January 31, 2014, 01:02:55 AM by taj |
|
Hmm wondering if anyone had any idea of what was causing this, I'm running two Sapphire R9 290 and the GPU1 is getting a lot less hashrates than the second... https://dl.dropboxusercontent.com/u/1556211/31-01-2014%2000-32-26.jpgIn other rig i have two R9 280x and i get a diferent hashrate, but aceptable, not like this edit: ok i found the problem, I guess my mem clock was to high and somehow was messing my hashrate on one gpu... i lowered it and now I'm getting 840 in gpu1 and 940 in gpu2 and will leave it this way for now
|
|
|
|
JackmeriusT
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 01:12:18 AM |
|
Hello, could you please unlock my account "WoodenSpoon"?
|
|
|
|
viatorek
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 01:21:15 AM |
|
Hmm wondering if anyone had any idea of what was causing this, I'm running two Sapphire R9 290 and the GPU1 is getting a lot less hashrates than the second... ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fdl.dropboxusercontent.com%2Fu%2F1556211%2F31-01-2014%252000-32-26.jpg&t=665&c=R2pwwHblB8DEiQ) In other rig i have two R9 280x and i get a diferent hashrate, but aceptable, not like this edit: ok i found the problem, I guess my mem clock was to high and somehow was messing my hashrate on one gpu... i lowered it and now I'm getting 840 in gpu1 and 940 in gpu2 and will leave it this way for now sapphire are smart cards...one is makes second one hot...so the second is working slower....get some risers and they will work equal
|
|
|
|
taj
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 01:28:50 AM |
|
thanks for the reply, and ye im waiting for my rig to be ready, but for now this is what i have, besides, i think that for the 290 is a pretty damn good hashrate BUT now I noticed I'm getting a lot of this Pool 0 stale share detected, submitting as user requested Rejected 03010224 Diff 85/64 GPU 0 pool 0 (STALE SHARE mainly from the gpu0 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Mountaineeer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 97
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 02:32:57 AM |
|
What is the best URL\port for various hash rate? I have a rig ~800, ~1400 and ~2400.
Also, one work for each or shared worker?
|
|
|
|
viatorek
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 06:43:04 AM |
|
all are some now
share this to different workers
|
|
|
|
|
Tripwn
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 01:43:19 PM |
|
Please unlock account name Sowerby
|
|
|
|
amuleth
Newbie
Offline
Activity: 45
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 11:14:28 PM |
|
I get lots of "Stratum from pool 0 requested work restart" messages this evening and my hash rate fluctuates. Is that affect our earnings?
|
|
|
|
sundownz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 11:30:51 PM |
|
Built two new machines with dual Powercolor 270x cards -- neither mines well AT ALL. http://www.newegg.com/Product/Product.aspx?Item=N82E16814131532Both systems crash all the time with GUIMiner and produce tons of hardware errors with CGMiner (probably 99% HW errors)... trying replicate any .bat or .conf files from others with single cards does not work at all. Any ideas ? I have 10 other systems running dual cards... but 7950 and 7970 -- all no problem... but can't get these R9 270x cards under control at all.
|
|
|
|
megainformer
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 12:02:05 AM |
|
Can you unlock my account? Username is 'megainformer'.
Your support gmail seems to be rejecting emails btw - I keep getting 'return to sender messages.'
Thanks in advance.
|
|
|
|
megainformer
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 12:24:27 AM |
|
Fast account unlock. Thanks man. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
sundownz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 02:31:52 AM |
|
Built two new machines with dual Powercolor 270x cards -- neither mines well AT ALL. http://www.newegg.com/Product/Product.aspx?Item=N82E16814131532Both systems crash all the time with GUIMiner and produce tons of hardware errors with CGMiner (probably 99% HW errors)... trying replicate any .bat or .conf files from others with single cards does not work at all. Any ideas ? I have 10 other systems running dual cards... but 7950 and 7970 -- all no problem... but can't get these R9 270x cards under control at all. Can you post a copy of the launch commands you're using? It sounds like your intensity is too high, or the memory, core clock is too high. I have stripped CGMINER all the way down to simply "-I 14" for flags and the GPUs at stock speeds -- speed is only in the low 300s and HW errors like crazy. Most people are adding large TC figures of ~15000+ but if I go over 8192 it simply errors out. With GUIMiner I can run ~430 but the systems crash in ~30 minutes -- most people report 450-480 on the R9-270X is no problem.
|
|
|
|
F9F0F
Newbie
Offline
Activity: 27
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 02:37:13 AM |
|
Built two new machines with dual Powercolor 270x cards -- neither mines well AT ALL. http://www.newegg.com/Product/Product.aspx?Item=N82E16814131532Both systems crash all the time with GUIMiner and produce tons of hardware errors with CGMiner (probably 99% HW errors)... trying replicate any .bat or .conf files from others with single cards does not work at all. Any ideas ? I have 10 other systems running dual cards... but 7950 and 7970 -- all no problem... but can't get these R9 270x cards under control at all. Can you post a copy of the launch commands you're using? It sounds like your intensity is too high, or the memory, core clock is too high. I have stripped CGMINER all the way down to simply "-I 14" for flags and the GPUs at stock speeds -- speed is only in the low 300s and HW errors like crazy. Most people are adding large TC figures of ~15000+ but if I go over 8192 it simply errors out. With GUIMiner I can run ~430 but the systems crash in ~30 minutes -- most people report 450-480 on the R9-270X is no problem. Well my MSI 270 none X does 472 just fine without any HW issue. Any chance that you have forgotten to set the following command?: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECT 1
|
|
|
|
sundownz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 02:43:37 AM |
|
Built two new machines with dual Powercolor 270x cards -- neither mines well AT ALL. http://www.newegg.com/Product/Product.aspx?Item=N82E16814131532Both systems crash all the time with GUIMiner and produce tons of hardware errors with CGMiner (probably 99% HW errors)... trying replicate any .bat or .conf files from others with single cards does not work at all. Any ideas ? I have 10 other systems running dual cards... but 7950 and 7970 -- all no problem... but can't get these R9 270x cards under control at all. Can you post a copy of the launch commands you're using? It sounds like your intensity is too high, or the memory, core clock is too high. I have stripped CGMINER all the way down to simply "-I 14" for flags and the GPUs at stock speeds -- speed is only in the low 300s and HW errors like crazy. Most people are adding large TC figures of ~15000+ but if I go over 8192 it simply errors out. With GUIMiner I can run ~430 but the systems crash in ~30 minutes -- most people report 450-480 on the R9-270X is no problem. Well my MSI 270 none X does 472 just fine without any HW issue. Any chance that you have forgotten to set the following command?: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECT 1 That seems to have done the trick along with the flags from here : http://dustin.io/2013/12/setting-up-litecoin-cgminer-with-latest-7970280x290x-hardware/Each one is at ~430 at stock clocks -- so will see if it remains stable. Thanks for the help.
|
|
|
|
F9F0F
Newbie
Offline
Activity: 27
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 02:45:57 AM |
|
Built two new machines with dual Powercolor 270x cards -- neither mines well AT ALL. http://www.newegg.com/Product/Product.aspx?Item=N82E16814131532Both systems crash all the time with GUIMiner and produce tons of hardware errors with CGMiner (probably 99% HW errors)... trying replicate any .bat or .conf files from others with single cards does not work at all. Any ideas ? I have 10 other systems running dual cards... but 7950 and 7970 -- all no problem... but can't get these R9 270x cards under control at all. Can you post a copy of the launch commands you're using? It sounds like your intensity is too high, or the memory, core clock is too high. I have stripped CGMINER all the way down to simply "-I 14" for flags and the GPUs at stock speeds -- speed is only in the low 300s and HW errors like crazy. Most people are adding large TC figures of ~15000+ but if I go over 8192 it simply errors out. With GUIMiner I can run ~430 but the systems crash in ~30 minutes -- most people report 450-480 on the R9-270X is no problem. Well my MSI 270 none X does 472 just fine without any HW issue. Any chance that you have forgotten to set the following command?: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECT 1 That seems to have done the trick along with the flags from here : http://dustin.io/2013/12/setting-up-litecoin-cgminer-with-latest-7970280x290x-hardware/Each one is at ~430 at stock clocks -- so will see if it remains stable. Thanks for the help. glad it work out
|
|
|
|
thegooblygiggler
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 07:33:46 AM |
|
could you please unlock my account "thegooblygiggler"
I'm forgetful
|
|
|
|
nitai
Newbie
Offline
Activity: 56
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 09:05:33 AM |
|
Somehow someone got into my account and found out both my username and PIN and changed my payout address. I did a manual withdrawal earlier today without looking at the payout address (assuming that it was like I left it before) and now I lost 2715 doge ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) account name is "nitai"
|
|
|
|
SaraMine
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 03:14:24 PM |
|
Somehow someone got into my account and found out both my username and PIN and changed my payout address. I did a manual withdrawal earlier today without looking at the payout address (assuming that it was like I left it before) and now I lost 2715 doge ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) account name is "nitai" you need to blame other hacked pool..where did you use same login/password/pin ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) never do that! use different for different pools
|
|
|
|
nitai
Newbie
Offline
Activity: 56
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2014, 06:41:19 PM |
|
Somehow someone got into my account and found out both my username and PIN and changed my payout address. I did a manual withdrawal earlier today without looking at the payout address (assuming that it was like I left it before) and now I lost 2715 doge ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) account name is "nitai" you need to blame other hacked pool..where did you use same login/password/pin ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) never do that! use different for different pools I use a different password/pin for each pool I use. I use lastpass to generate a random password for each pool so I don't have to remember it! Also my account is locked now. Can you unlock it? I tried logging in with my old password and I think it locked itself. account: nitai
|
|
|
|
|