Star Trek Crypto Coin thread - Big changes are coming!!

[unfocus]

At any rate, this is crazy! That ASIC miner is rated at 25 Mhz, we are talking about 10+ of the big units.

[unfocus]

And now back to 22 Mhz. 

[MobGod]

ok so what is final price in LTC and BTC for the 50 and thanks for the heads up on KED  

0.5 LTC one time fan only deal. You got the address, please sent first, and send me the GPL address.

ok i'm here
FCtUtzo9JT7VqAJAQjA7n5otAcdXsAmQpF going to edit the post with the tx just doing this to get it going ok the exchange is not acting right for me to send the LTC but i did send it's stuck i can send again or we can just wait, if i send it again you would have to send the other back

Also dream is that you with the big wallet that needs to be passed out for the older one's ?

[unfocus]

Let's just wait. No rush..

[Xaltotun]

Hi, I'm trying to update my UFC blockchain but it seems I have no connections. Can anyone please list some nodes? I'm using version 1.55. Thanks.

[truckythin]

does anyone mining GPL atm? how many kh/s do you guys have when mining on gplcoin.com?
i'm using AMD 7970 but only get 68kh/s, is that ok?

[MobGod]

does anyone mining GPL atm? how many kh/s do you guys have when mining on gplcoin.com?
i'm using AMD 7970 but only get 68kh/s, is that ok?

Not sure I can't get it to work with 7970's what settings are you using

[truckythin]

using ybcminer with --Nfmin 4 --Nfmax 30 --StartT 1377557867 --thread-concurrency 8192 -I 13 -g 2 -w 256,
it usually get 500-600 kh/s before when i still can solo for a while.

[Thrash]

Hi, I'm trying to update my UFC blockchain but it seems I have no connections. Can anyone please list some nodes? I'm using version 1.55. Thanks.

Try these:

addnode=84.200.17.249
addnode=198.199.100.216
addnode=108.185.76.42

[Xaltotun]

does anyone mining GPL atm? how many kh/s do you guys have when mining on gplcoin.com?
i'm using AMD 7970 but only get 68kh/s, is that ok?

I have my problem child 7950 pointed at the GPL pool. It under performs at 37 gh/s. It had a bad fan that I replaced w/ another used one and I'm thinking of redoing it's thermal paste soon. Normally I think it should be between 50-60 gh/s.

Thanks for the nodes Thrash, seems I'm still loosing connection though. It had connected to those 3 but I'm stuck at block 164797 and not showing connections. Think I'll redownload the blockchain for the hell of it.

[MobGod]

using ybcminer with --Nfmin 4 --Nfmax 30 --StartT 1377557867 --thread-concurrency 8192 -I 13 -g 2 -w 256,
it usually get 500-600 kh/s before when i still can solo for a while.

well that could be right for hash don't forget it's a cpu coin with a cgminer hack to mine it with GPU if i'm not correct someone chime in

[truckythin]

using ybcminer with --Nfmin 4 --Nfmax 30 --StartT 1377557867 --thread-concurrency 8192 -I 13 -g 2 -w 256,
it usually get 500-600 kh/s before when i still can solo for a while.

well that could be right for hash don't forget it's a cpu coin with a cgminer hack to mine it with GPU if i'm not correct someone chime in

hi MobGod, which cpuminer that can be use to mine this coin?

[MobGod]

using ybcminer with --Nfmin 4 --Nfmax 30 --StartT 1377557867 --thread-concurrency 8192 -I 13 -g 2 -w 256,
it usually get 500-600 kh/s before when i still can solo for a while.

well that could be right for hash don't forget it's a cpu coin with a cgminer hack to mine it with GPU if i'm not correct someone chime in

hi MobGod, which cpuminer that can be use to mine this coin?

From my understanding you need to use the one provided

[truckythin]

ok as dream's gplcoin.com pool. it point to this one https://bitcointalk.org/index.php?topic=55038.msg654850#msg654850
i try that pooler_cpuminer thing too, but sadly this one does not support for scrypt-jane, so mining process will present totally rejected.

then i try this one https://github.com/ali1234/cpuminer, that has scrypt-jane support, but sadly this one seem does not have stratum support
ok then i end up with mining_proxy with this one. Mining running but not any accepted, the pool say that worker does not connected....

then i give up with cpu that mining for scrypt-jane 

[unfocus]

Use the CPU miner from Dream's git repo:  https://github.com/Hartland/GPL-CPU-Miner


The hash rates that you guys are talking about are way too high for 7950 and 7970. The N factor has gone up quite a bit, and you should be getting single digit or low two digit hash rates.

I too was getting 60+, but turn debugging on and you'd see how much junk it creates. You'd need to check the effective hash rate at the pool. The good news is that since everyone's effective hash rate go down a lot, the difficulty is kept low. Still this is a tough coin to mine, and it's getting harder with time. Eventually it's going to be just CPU coin.

See this thread: http://scificointalk.com/index.php/topic,6.msg1109.html#msg1109
The best setting for 8950 (basically OEM 7950) is 22k and that's with I 10 and memory clock 1850, and I cannot get that myself.
Try lower intensity with higher memory clock, since with increasing N factor, its more and more memory intensive.

Good luck..

[mogrith]

This might help
http://www.scificryptocoin.org/index.php/general-information/how-to-mine/13-how-to-mine-gpl-at-pool

[truckythin]

thanks unfocus, my 7970 showup in the pool only 1kh/s, that's discouraged  

[truckythin]

the Harlant github is exactly i need, the cpu miner with scrypt-jane and stratum.
just get it up and mining. my 64 cores server show 6.14kh/s, not bad.

[unfocus]

thanks unfocus, my 7970 showup in the pool only 1kh/s, that's discouraged  

That's because your settings are too aggressive. Try lower I, higher mem clock, and lower thread counts. You'd actually get better results and more GPLs.

[unfocus]

the Harlant github is exactly i need, the cpu miner with scrypt-jane and stratum.
just get it up and mining. my 64 cores server show 6.14kh/s, not bad.

64 cores!