[ANN] 1GH.COM - HVC / MAX / MMC / PTS / VIA Anonymous Pool ★

[reorder]

hello
i use cudaminer
with gtx 560i

address
mNb2sbjPftLvcs9josJhHkLLZ1xJFBQREf

mining from several hours but not yet received the payout, what's wrong?
Thanks

You get paid within 60 minutes when your account balance reaches 0.5 MAX. If it does not reach 0.5, you get paid within 72 hours max (usually 24 hours). Your current balance is 0.1, below the 0.5 threshold for immediate payment.

[konarix]

Hi.

I was mining -scrypt on middlecoin with sgminer earlier.
My hashrate on 5x290's was 4,2MH/s in total.

Here, with cgminer it is 2,1GH and WU is 463/s in total.
Is is good?

Code:

 (5s):2.192G (avg):2.084Gh/s | A:105952  R:4224  HW:0  WU:464.2/m  WUE:0.0%
 ST: 2  SS: 7  NB: 36  LW: 730  GF: 1  RF: 0
 Connected to maxpool.1gh.com diff 256 with stratum as user xxx
 Pool 0  Diff: 103K  Started: [18:53:24]  Best share: 3.06K
--------------------------------------------------------------------------------
 GPU 0:  63.0C 4563RPM | 432.4M/418.2Mh/s | R:0.6% HW:0 WU: 93.6/m T:1 I:13
 GPU 1:  60.0C 4386RPM | 430.6M/416.7Mh/s | R:4.8% HW:0 WU: 92.1/m T:1 I:13
 GPU 2:  64.0C 4478RPM | 427.5M/415.9Mh/s | R:7.1% HW:0 WU: 96.0/m T:1 I:13
 GPU 3:  67.0C 4329RPM | 430.6M/417.2Mh/s | R:2.7% HW:0 WU: 89.5/m T:1 I:13
 GPU 4:  59.0C 4476RPM | 430.8M/416.9Mh/s | R:3.7% HW:0 WU: 93.4/m T:1 I:13
--------------------------------------------------------------------------------

My bat file is:

Code:

cgminer.exe --keccak --no-submit-stale -o stratum+tcp://maxpool.1gh.com:17333 -u xxx -p x -g 1 -w 512 -I 13 --gpu-fan 100

Can I make more power from my rig?
I'm new to kessak.

Thank You.
Best Regards.

[reorder]

Hi.

I was mining -scrypt on middlecoin with sgminer earlier.
My hashrate on 5x290's was 4,2MH/s in total.

Here, with cgminer it is 2,1GH and WU is 463/s in total.
Is is good?

Code:

 (5s):2.192G (avg):2.084Gh/s | A:105952  R:4224  HW:0  WU:464.2/m  WUE:0.0%
 ST: 2  SS: 7  NB: 36  LW: 730  GF: 1  RF: 0
 Connected to maxpool.1gh.com diff 256 with stratum as user xxx
 Pool 0  Diff: 103K  Started: [18:53:24]  Best share: 3.06K
--------------------------------------------------------------------------------
 GPU 0:  63.0C 4563RPM | 432.4M/418.2Mh/s | R:0.6% HW:0 WU: 93.6/m T:1 I:13
 GPU 1:  60.0C 4386RPM | 430.6M/416.7Mh/s | R:4.8% HW:0 WU: 92.1/m T:1 I:13
 GPU 2:  64.0C 4478RPM | 427.5M/415.9Mh/s | R:7.1% HW:0 WU: 96.0/m T:1 I:13
 GPU 3:  67.0C 4329RPM | 430.6M/417.2Mh/s | R:2.7% HW:0 WU: 89.5/m T:1 I:13
 GPU 4:  59.0C 4476RPM | 430.8M/416.9Mh/s | R:3.7% HW:0 WU: 93.4/m T:1 I:13
--------------------------------------------------------------------------------

My bat file is:

Code:

cgminer.exe --keccak --no-submit-stale -o stratum+tcp://maxpool.1gh.com:17333 -u xxx -p x -g 1 -w 512 -I 13 --gpu-fan 100

Can I make more power from my rig?
I'm new to kessak.

Thank You.
Best Regards.

I have seen reports of 290X doing up to 850MHs, but do not know the tuning parameters. Only can tell that you have to overclock cores to max and downclock memory to min. You are probably better off asking on irc #maxcoin and #maxhelp on freenode.

[phobosgrunt]

I have 2x 7950s I am getting 240 mh/s from each card. Is that right or do I need to change something.

Thanks

edit: hash rate has dropped drastically since posting this

edit2: ok it has stabilized at 240 for a long time now, but I am able to use my computer with no lag at all so there has to be something I can do to send more power to my GPUs

[IL MinaTore]

Any have good settings for R9 280x ? 

[reorder]

Any have good settings for R9 280x ? 

Just "-I 13", and overclock cores to maximum that power/heat allows.

[phobosgrunt]

what -I should I use for 7950? it seemed to set it self at 5 without setting it to anything

[reorder]

what -I should I use for 7950? it seemed to set it self at 5 without setting it to anything

13 too, and experiment with workgroup size (-w)

[phobosgrunt]

what -I should I use for 7950? it seemed to set it self at 5 without setting it to anything

13 too, and experiment with workgroup size (-w)

what range of numbers should i be experimenting with for workgroup size

also thanks for the replies

[reorder]

what -I should I use for 7950? it seemed to set it self at 5 without setting it to anything

13 too, and experiment with workgroup size (-w)

what range of numbers should i be experimenting with for workgroup size

also thanks for the replies

64, 128, 256.

[phobosgrunt]

what -I should I use for 7950? it seemed to set it self at 5 without setting it to anything

13 too, and experiment with workgroup size (-w)

what range of numbers should i be experimenting with for workgroup size

also thanks for the replies

64, 128, 256.

i 13 gave me tons or rejects, i tried 11 because thats what gui miner script use to set it at

question about worksize. what if I dont set it, because the command line from the 1gh site doesnt have -w or -I in it

[reorder]

what -I should I use for 7950? it seemed to set it self at 5 without setting it to anything

13 too, and experiment with workgroup size (-w)

what range of numbers should i be experimenting with for workgroup size

also thanks for the replies

64, 128, 256.

i 13 gave me tons or rejects, i tried 11 because thats what gui miner script use to set it at

question about worksize. what if I dont set it, because the command line from the 1gh site doesnt have -w or -I in it

It is set automatically then, please try what is best for your card.

[phobosgrunt]

what -I should I use for 7950? it seemed to set it self at 5 without setting it to anything

13 too, and experiment with workgroup size (-w)

what range of numbers should i be experimenting with for workgroup size

also thanks for the replies

64, 128, 256.

i 13 gave me tons or rejects, i tried 11 because thats what gui miner script use to set it at

question about worksize. what if I dont set it, because the command line from the 1gh site doesnt have -w or -I in it

It is set automatically then, please try what is best for your card.

last questions hopefully, thanks so much for your help already seeing about 100mh more

should I be seeing the same hash rates and when I min scrypt coins? or does that completely change with the algo?

what about thread concurrency, how do I set it and should I set it?

[reorder]

what -I should I use for 7950? it seemed to set it self at 5 without setting it to anything

13 too, and experiment with workgroup size (-w)

what range of numbers should i be experimenting with for workgroup size

also thanks for the replies

64, 128, 256.

i 13 gave me tons or rejects, i tried 11 because thats what gui miner script use to set it at

question about worksize. what if I dont set it, because the command line from the 1gh site doesnt have -w or -I in it

It is set automatically then, please try what is best for your card.

last questions hopefully, thanks so much for your help already seeing about 100mh more

should I be seeing the same hash rates and when I min scrypt coins? or does that completely change with the algo?

what about thread concurrency, how do I set it and should I set it?

It is not related to scrypt, and thread concurrency does not make sense. The algorithm is more like bitcoin.

[phobosgrunt]

what -I should I use for 7950? it seemed to set it self at 5 without setting it to anything

13 too, and experiment with workgroup size (-w)

what range of numbers should i be experimenting with for workgroup size

also thanks for the replies

64, 128, 256.

i 13 gave me tons or rejects, i tried 11 because thats what gui miner script use to set it at

question about worksize. what if I dont set it, because the command line from the 1gh site doesnt have -w or -I in it

It is set automatically then, please try what is best for your card.

last questions hopefully, thanks so much for your help already seeing about 100mh more

should I be seeing the same hash rates and when I min scrypt coins? or does that completely change with the algo?

what about thread concurrency, how do I set it and should I set it?

It is not related to scrypt, and thread concurrency does not make sense. The algorithm is more like bitcoin.

thanks for all the help, gunna keep messing around with -I and -w see what works best

[stsonic]

I can't connect to the pool using the basic command given and the latest miner build.

Windows ati

[reorder]

I can't connect to the pool using the basic command given and the latest miner build.

Windows ati

What is the error message you get?

[Pustul]

I have a problem with my r9 290s, the memory clock stays at 150mhz whatever I do. I can't change it with cgminer or conf file or even afterburner it always stays at 150...

[reorder]

I have a problem with my r9 290s, the memory clock stays at 150mhz whatever I do. I can't change it with cgminer or conf file or even afterburner it always stays at 150...

The problem might be your card actually, probably you have to RMA it. However, if this is for maxcoin, memory frequency does not affect hps at all.

[Pustul]

I have a problem with my r9 290s, the memory clock stays at 150mhz whatever I do. I can't change it with cgminer or conf file or even afterburner it always stays at 150...

The problem might be your card actually, probably you have to RMA it. However, if this is for maxcoin, memory frequency does not affect hps at all.

I have 6 of them, working fine with sgminer, vertcoin miner, etc