[WTS] USB Style PCI-E 1x - 16x Powered Riser Cables !! $5.95 ea 25k + Sold!

[Dale407]

I would like to order 5 when their back in stock.

[1714806931]

1714806931

[1714806931]

1714806931

[1714806931]

1714806931

[phaddie]

Installed 3 of them today, work like a charm. 

Thanks!!!

[elpsycongro]

got my order today , worked like a charm 

[bucaniere00]

.

[12gaFacelift]

January 28, 2014 , 4:45 pm - Acceptance - GRANTS PASS, OR 97526

February 1, 2014 , 1:09 pm - Processed Through Sort Facility - ISC LOS ANGELES CA (USPS)


I just hope to get them before xmas...

[RickJamesBTC]

I think that last status is when it leaves the country.

On  a good note, an order of these that was sitting in an airport in china for two weeks has started moving. I should have these available for sale again by the end of the week or early next week !!

[Halofire]

i bought 3 of these off your ebay, magicgrow...etc etc. i can't seem to get them to work, tried all 3. i plugged in molex, molex is attached to hard drive and psu. gpu isn't recognized in device manager. if i directly hook up gpu to mobo, it works. when i attach to your cable/card, gpu isn't recognized. help!

corsair 1200ax
12gb ddr3
amd fx 4400
2 @ xfx r9 270x
1@ xfx r9 290
asrock extreme 4 970 mobo

[RickJamesBTC]

i bought 3 of these off your ebay, magicgrow...etc etc. i can't seem to get them to work, tried all 3. i plugged in molex, molex is attached to hard drive and psu. gpu isn't recognized in device manager. if i directly hook up gpu to mobo, it works. when i attach to your cable/card, gpu isn't recognized. help!

corsair 1200ax
12gb ddr3
amd fx 4400
2 @ xfx r9 270x
1@ xfx r9 290
asrock extreme 4 970 mobo

Are you sure you are plugging the little card in correctly, the notch should hang over the end of the pcie socket. Bad things happen if you turn it the other way. Have you tried them one at a time? Do you use dummy plugs? I'm sorry, I don't really mine in windows, so these are the only issues I can think of. Switch to xubuntu or BAMT, nice and easy!

[Halofire]

yes, they are installed correctly with the little thing overhanging. i've only tried them one at a time. i have one dvi-d to vga dummy plug, has no effect. Also, plugging monitor results in 'no signal'

[RickJamesBTC]

You sure you have the molex power plugged into the big card correctly? Can you measure the voltage on the red and yellow wires?

[Halofire]

red 5
yellow 12.15
molex can only be plugged in one way
little white plug need to be plugged in? its not, hasn't been. went by your pics, pics show no white plug.

[RickJamesBTC]

red 5
yellow 12.15
molex can only be plugged in one way
little white plug need to be plugged in? its not, hasn't been. went by your pics, pics show no white plug.

That's just an extra plug, the only cables I could get with the correct gender connectors at the time.

Have you tried leaving one gpu on the motherboard and adding the others via riser?

[flowdoge]

I've noticed the molex to sata power adapters sometime will push the pins out of the molex end when you plug them in. I didn't use the adapter as I had free molex plugs from my PSU.

[ShakinHandz]

I'd also like to reserve five of the USB risers when they become available...

[Pita]

i bought 3 of these off your ebay, magicgrow...etc etc. i can't seem to get them to work, tried all 3. i plugged in molex, molex is attached to hard drive and psu. gpu isn't recognized in device manager. if i directly hook up gpu to mobo, it works. when i attach to your cable/card, gpu isn't recognized. help!

corsair 1200ax
12gb ddr3
amd fx 4400
2 @ xfx r9 270x
1@ xfx r9 290
asrock extreme 4 970 mobo

Are you sure you are plugging the little card in correctly, the notch should hang over the end of the pcie socket. Bad things happen if you turn it the other way. Have you tried them one at a time? Do you use dummy plugs? I'm sorry, I don't really mine in windows, so these are the only issues I can think of. Switch to xubuntu or BAMT, nice and easy!

RickJamesBTC, do the little boards have the shorted pin for the sensing of PCIe card? If not, that may be his issue as well. He may then need to manually add a jumper wire for that. Just a suggestion.

[fran2k]

I bought 6.8 BTC (6k USD) in risers, without escrow.

Because of low stock he made a fast refund of 25%.

Fast shipping. Recommendable.

[RickJamesBTC]

RickJamesBTC, do the little boards have the shorted pin for the sensing of PCIe card? If not, that may be his issue as well. He may then need to manually add a jumper wire for that. Just a suggestion.

Yes, the little boards connect the presence pin at the 1x length. These work for hundreds of customers without issue, the problem has to be in his setup, especially if none of the three units works for him.

[elchorizo]

Would like to order 10 pieces when they are back in stock.

[vesperwillow]

i bought 3 of these off your ebay, magicgrow...etc etc. i can't seem to get them to work, tried all 3. i plugged in molex, molex is attached to hard drive and psu. gpu isn't recognized in device manager. if i directly hook up gpu to mobo, it works. when i attach to your cable/card, gpu isn't recognized. help!

corsair 1200ax
12gb ddr3
amd fx 4400
2 @ xfx r9 270x
1@ xfx r9 290
asrock extreme 4 970 mobo

First make sure they work without the risers. Put the cards in right on the motherboard. If they're still not showing up, your cards and/or motherboard and/or OS setup are hosed. If at any point you have reversed the risers, you have likely fried things. If they work, then move on:

Second, sometimes windows has issues using GPUs which are only on the 1x pcie format, especially AMD-based ones. Reboot several times, they might start showing up one at a time. I've seen that solve it.

Third, don't use windows to mine, try an alternate setup. Try BAMT, for example.

[blade87]

I'd like to reserve/buy 10 when they get back in stock. Actually depending on shipping I may just order $250 worth.