drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 06, 2014, 10:34:41 PM |
|
XFX 280X : voltage at which the cards are stable (at 1050@1500), usually 1.15V, but one of the cards required 1.175V 230W each and run at steady 730kH/s. Temperature is about 72-73C with fan at up to 80%.
Thanks, I am trying your values E: 1050 M: 1500 V: 1.149V and I get: 69C 510 khash 253 W that is 2.02 khash/WattTo get over 700 khash, I have to up' the memclock to M: 1680 E: 1050 V: 1.149V that results in 72 C 705 khash/s 293 Watt that is 2.40 khash/Watt.
|
no sign of a signature
|
|
|
mine2mind112
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 73
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 06, 2014, 10:50:27 PM |
|
I did try your settings, and they resulted in similar power consumption yes - but only 272khash Now what is your core voltage? I forgot to say i use the switch g 2 also. Sometimes some card start at 1/2 expected khash....in that case i have to reboot (maybe voltage...).. Are you trying with multiple card or just one? Anyway these are my settings :
"intensity" : "13,13,13", "vectors" : "1,1,1", "worksize" : "256,256,256", "kernel" : "scrypt,scrypt,scrypt", "lookup-gap" : "2,2,2", "thread-concurrency" : "8192,8192,8192", "shaders" : "2048,2048,2048", "gpu-engine" : "925-925,925-925,925-925", "gpu-fan" : "51-51,61-61,51-51", "gpu-memclock" : "990,990,990", "gpu-memdiff" : "0,0,0", "gpu-powertune" : "0,0,0", "gpu-vddc" : "0.000,0.000,0.000", "temp-cutoff" : "95,95,95", "temp-overheat" : "85,85,85", "temp-target" : "75,75,75", "api-listen" : true, "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "log" : "5", "no-pool-disable" : true, "queue" : "0", "scan-time" : "1", "scrypt" : true, "temp-hysteresis" : "3", "worktime" : true, "shares" : "0", "kernel-path" : "/usr/local/bin", "api-allow" : "192.168.1.11"I would point out that 6 month ago i could not get these value.
THAT is really interesting - and perhaps an explanation? Perhaps you have "trained" your cards into high performance? I have just changed drivers, and flashed an undervolted bios cause 7970 on linux was locked....I flashed also 280x for then discover that cgminer can change 280x voltage (also on linux).At which (approximate) settings have you had them running in those 6 months, before you reinstalled and readjusted? And which power consumption and temperature? Well I restart mining on november.. (during summer was killing me) .but i remember i had to use higher memory setting for the same result....Mem to about 1350Recently I reinstall the rig with new drivers and cgminer 3.7.2.
Which catalyst drivers? Driver ati 13.12 and 13.10 .....I'm using ubuntu but it works also on windows ( i use it just for flash bios) I builded cgminer my self with AMD-APP-SDK-v2.9-lnx64.tgz , but also the pre-build one could work. Yes are my value (when i see them i did't belive myself). My rigs are 3x VTX HD 7970 X-Ediction and 4x Sapphire R9 280x Dual-X. The "U:" not sure what is....it is reported when u are mining and click "G" for modify Video cards setting. try to put Engine to 900 and Mem to 910, then you go up with Mem 920, then 930 ecc...you should find a spot where you are about 600 Khash/s. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FhkV7Wsp.png%3F1&t=665&c=-VR23SMA4eVPmg) In the photo I' m not using 900 how engine but a little more....900 is just a point I use to start. If only I would get even close to 500, it would be fantastic. 280x rig is about 760 Watt 7970 rig is about 600 Watt
Amazing. With that you could even mine for Danish electricity prices :-) Tc = 8192 I = 13
Same here. For a while I had Tc = 10240, 11264 on my 7970 and 7850 - because that was the max multiple of shaders that didn't result in kernel errors. But then very often, both cards would just not start at full power, always one of them hovering at 30khash. It took me ages to find out this solution, and that it is not a lack of power (I have funny cabling in my old machine): Tc = 8192, 8192 works perfectly. It's only using 1072MB of the 3GB of my 7970, and I don't understand that - but it's fine. Can't help mutch about this.But i don't think matter too mutch.It works for me also with other value.
hmmm ... we really need to find out how you are able to drive your cards up to such high khash for so little clockspeed = temperature = Watt = electricity costs.
Let's save half of the electricity of the worldwide GPU grid! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
mine2mind112
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 73
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 06, 2014, 10:56:53 PM |
|
Just made some shit with colors....hope u can read the answer....and sorry for poor english ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|
Pavlinius
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 75
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 06, 2014, 11:03:56 PM |
|
XFX 280X : voltage at which the cards are stable (at 1050@1500), usually 1.15V, but one of the cards required 1.175V 230W each and run at steady 730kH/s. Temperature is about 72-73C with fan at up to 80%.
Thanks, I am trying your values E: 1050 M: 1500 V: 1.149V and I get: 69C 510 khash 253 W that is 2.02 khash/WattTo get over 700 khash, I have to up' the memclock to M: 1680 E: 1050 V: 1.149V that results in 72 C 705 khash/s 293 Watt that is 2.40 khash/Watt.What is your hash rate at 1000@1500 ? Such big drops(you mentioned 510) in the hash rate are usually because of too much clock, so try lowering the GPU clock a bit. You should be able to get about 700kh/s at 1020@1500. Also how do you measure the card's power consumption ?
|
BITCOIN @ 13hCRyr1hLct4kPWNsjgPo1XuEXLXh4AAW, LITECOIN @ LLprHsnRvvj31tqvJyTi79AkqBtmQqhVCw LOTTOCOIN @ LkuynfD1o8Td9VPy7ysZWJQA4eyGRSSx9X, EARTHCOIN @ ehUTcEyHkmi9ABhiXnkw6JJnbtUDi9NirN NUTCOIN @ NTdsYSHAicJMjqcTjxSWEUDxCdBRA3kLfS
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 07, 2014, 02:56:10 AM Last edit: January 07, 2014, 04:15:12 AM by drakoin |
|
XFX 280X : (at 1050@1500), usually 1.15V, but one of the cards required 1.175V 230W each and run at steady 730kH/s. Temperature is about 72-73C with fan at up to 80%.
Thanks, I am trying your values E: 1050 M: 1500 V: 1.149V and I get: 69C 510 khash 253 W that is 2.02 khash/WattTo get over 700 khash, I have to up' the memclock to M: 1680 E: 1050 V: 1.149V that results in 72 C 705 khash/s 293 Watt that is 2.40 khash/Watt.What is your hash rate at 1000@1500 ? 510 khash/s Such big drops(you mentioned 510) in the hash rate are usually because of too much clock, so try lowering the GPU clock a bit.
I tried a bit around your values of course, but around the 1050/1500 range it is just not optimal for my card. You should be able to get about 700kh/s at 1020@1500.
Our cards are different. I have a rather cheap 7970 from XFX. Yes, I can get >700 but with 1050/1680/1.149V and then I use so much power, that I end up with 2.40 khash/Watt only. Also how do you measure the card's power consumption ?
How to measure properly Step 1: Baseline I switch all cards to (d)isable, then I wait until the temperature/fanspeed is down, then I have a look at the 8euro-wattmeter. The result is what I use as my baseline. Of course this baseline includes the power usage not only of the motherboard/cpu/rigfans/etc. but also of the idle cards with 300/150 Mhz idle speeds at stock voltage - but it's just an offset, for all my subsequent experiments. It's much easier than unmounting the cards, instead it's just a quick (d)isable/(e)nable. That baseline is a certain cell in my excel file, which I always automatically subtract. Step 2: Optimization I tweak the clocks until I get the highest possible khash. Step 3: undervolting I lower the voltage until catalyst / cgminer / windows crashes, then reboot, add something like 0.025 V to the crash value (sometimes less or more, it's "feeling" it *g* ) Step 4: waiting until no more temperature / fanspeed change Step 5: wattmeter I stare at my wattmeter for about a minute counting out loud the values *g* because they usually fluctuate within 20Watts. Then after a while I just know the average. Step 6: Excel It's documented, so that I can compare, go back to it, combine cards, etc. Step 7: Publish Yiehah! :-)
|
no sign of a signature
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 07, 2014, 03:03:01 AM |
|
Just made some shit with colors....hope u can read the answer....and sorry for poor english ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) I understand you very well. Your English is not bad. And I like the "shit with colors" ... makes it easier to read. But please, what would be even better - if you simply DELETE everything in your quote that is not important for your answer. You don't have to quote the whole message to which you are answering. I see that a lot here in this forum, and it makes reading really difficult. It takes only a few seconds of time to decide "I am not answering to that paragraph, so I delete it in my quote". Thanks :-) P.S.: Oh and if I want to write in between, I just copy the begin quote and end quotetags
|
no sign of a signature
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 07, 2014, 03:23:59 AM |
|
I forgot to say i use the switch g 2 also.
Yes, I also do that. Gives a lot more than -g 1 Sometimes some card start at 1/2 expected khash....in that case i have to reboot (maybe voltage...)..
Or Watt. How big is your PSU, perhaps it's not delivering enough amperes to the card, and the card notices? Are you trying with multiple card or just one?
Always optimizing only one card because otherwise I don't know where a crash came from. Anyway these are my settings : "intensity" : "13,13,13", "vectors" : "1,1,1", "worksize" : "256,256,256", "kernel" : "scrypt,scrypt,scrypt", "lookup-gap" : "2,2,2", "thread-concurrency" : "8192,8192,8192", "shaders" : "2048,2048,2048", "gpu-engine" : "925-925,925-925,925-925", "gpu-fan" : "51-51,61-61,51-51", "gpu-memclock" : "990,990,990", "gpu-memdiff" : "0,0,0", "gpu-powertune" : "0,0,0", "gpu-vddc" : "0.000,0.000,0.000", "temp-cutoff" : "95,95,95", "temp-overheat" : "85,85,85", "temp-target" : "75,75,75", "api-listen" : true, "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "log" : "5", "no-pool-disable" : true, "queue" : "0", "scan-time" : "1", "scrypt" : true, "temp-hysteresis" : "3", "worktime" : true, "shares" : "0", "kernel-path" : "/usr/local/bin", "api-allow" : "192.168.1.11"
Thanks! Looks very similar to mine. I don't know about these two: "lookup-gap" : "2,2,2", "gpu-dyninterval" : "7",
{quoting got a bit messed up so I switch to email style for now:}
> > > I would point out that 6 month ago i could not get these value. > > THAT is really interesting - and perhaps an explanation? > > Perhaps you have "trained" your cards into high performance? > I have just changed drivers, and flashed an undervolted bios > cause 7970 on linux was locked....I flashed also 280x for then > discover that cgminer can change 280x voltage (also on linux). ah, nice to know. What did you use to edit the r9-280x bios? Also VBE7 ? > > At which (approximate) settings have you had them running > > in those 6 months, before you reinstalled and readjusted? > > And which power consumption and temperature? > Well I restart mining on november.. (during summer was killing me) . > but i remember i had to use higher memory setting for the same result.... > Mem to about 1350 Alright, so very different from now. > > > Recently I reinstall the rig with new drivers and cgminer 3.7.2. > > Which catalyst drivers? > Driver ati 13.12 and 13.10 ..... > I'm using ubuntu > but it works also on windows ( i use it just for flash bios) > I builded cgminer my self with AMD-APP-SDK-v2.9-lnx64.tgz , could that also be a reason for the good performance? > but also the pre-build one could work. [/font] > > Let's save half of the electricity of the worldwide GPU grid! Let's get back to this now. Have a look below. Thanks a lot for the inspiration!
|
no sign of a signature
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 07, 2014, 04:02:53 AM Last edit: April 07, 2014, 04:21:48 PM by drakoin |
|
Inspired by these peculiar settings ... I suggest try value like these.... power usage is about 180W x card. GPU 1: 625.1 Kh/s | I:13 58.0 C F: 51% E: 915 MHz M: 960 Mhz V: 0.981V
... I have searched for sweet spots in completely new places. And found one in an unexpected area! Usually, the optimal khash appeared around engineclock/memclock = 0.62 to 0.64. But now I have found a new one, at memclock/engineclock = 1.06, that is more engineclock than memclock (!). It has less khash, but so much less Watt that it's worth it. It's the third (C) in this before-and-after table: | CC | MC | Volt | Celsius | khash | Watt | khash/watt | (A) | 907 | 1450 | 1.175 | 74 | 622 | 277 | 2.25 | (B) | 1025 | 1635 | 1.038 | 73 | 692 | 240 | 2.88 | (C) | 854 | 799 | 0.893 | 70 | 578 | 153 | 3.78 | |
(A) = before undervolting (before I started this thread) (B) = best undervolting (stable > 39 hours) (C) = best undervolting & underclocking (stable for many days now) 3.78 instead of 2.88 is pretty amazing. Yes, compared to the max possible hashing performance, I loose out on 16% hashrate - that is like throwing away 38 euros worth of 229 euros hardware; but on the other hand, the new settings (C) are saving 36% electricity compared to the max hashing performance (B), and 45% of electricity compared to before-the-undervolting (C). This new sweet spot is cool: Mem clock slightly lower than engine clock, for an XFX 7970!! People in Solomon, Virgin, Turks, Caicos and Marshall Islands, Tonga, Jamaica, Niue, Denmark, Samoa, Tuvalu, Germany, Philippines, Cook Islands, Brazil, Kiribati, Belgium, Netherlands, Italy, Ireland and Sweden - we are the good ones, because our governments actually care about the environment *g*. But here's a way for us, to also participate in cryptomining - we have to undervolt and underclock our coinmining rigs dramatically. ![Kiss](https://bitcointalk.org/Smileys/default/kiss.gif) EDIT: #37 has become THE posting about this low energy mining.
|
no sign of a signature
|
|
|
mine2mind112
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 73
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 07, 2014, 11:29:37 AM |
|
How big is your PSU, perhaps it's not delivering enough amperes to the card, and the card notices? Don't think.....PSU are 1000 for 7970 and 1050 for 280xI don't know about these two: "lookup-gap" : "2,2,2", "gpu-dyninterval" : "7", About these value i dind't find a lot on google but there is some info in the GPU-README of cgminer. Looks like that if u set "thread-concurrency" you don't need to set "shaders" , "lookup-gap" , and "worksize" ( if I remember correctly). Some value like "gpu-dyninterval" are there because when I found a good setting i print it with cgminer and it add a lot of value i don't understand.ah, nice to know. What did you use to edit the r9-280x bios? Also VBE7 ? I changed State #0 and State #6 Engine,MEM,Voltage: Engine: 930 Mem: 990 Voltage 0.980
but the voltage was to low ( i had no time to test it too mutch) so i had to set it higher with cgminer ( 1020 looks ok , but for 1 card was not enought)> I builded cgminer my self with AMD-APP-SDK-v2.9-lnx64.tgz , could that also be a reason for the good performance? Don't think because pre-builded cgminer is using an older version I think ( not sure wich one)----------------- Later I will try your value ( ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) realy low voltage) .... going down with MEM under Engine (never tried).
|
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 07, 2014, 02:29:12 PM Last edit: January 07, 2014, 05:08:36 PM by drakoin |
|
Tried a few other values, but this is the best so far: CC: 854 MC: 799 - if I go to 801 it falls from 575 khash to ~200 ! V: 0.893 Seems to run stable, but let's observe longer. I would love to find one with a bit more Watt and khash. Later I will try your value ( Smiley realy low voltage) .... going down with MEM under Engine (never tried). It might be in a completely different spot. Just walk around in configuration space a bit, you will feel it :-) Enjoy!
|
no sign of a signature
|
|
|
mine2mind112
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 73
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 08, 2014, 10:32:42 AM |
|
I didn't try to undervolt but I can find your spot......don't know why you can't find mine.....
|
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 08, 2014, 01:31:33 PM |
|
I didn't try to undervolt but I can find your spot......
oh wow. Cool. That's interesting. So these spot's are more universal than I thought. With the 7970, or the R9? The exact same CC:854 MC:799 ? How many khash? Now that you found my sweet spot on your card, I am starting to ask the same question...: don't know why you can't find mine.....
Yes, now I agree, that that is odd. Hypotheses: * Perhaps that 7970-optimum is actually slightly off your CC:925 MC:990 ? Did you optimize in 5Mhz steps, or in the end like this ... 927 ... 926 ... 923 ... 924 ... 925 ... ? If not, could you try that for me? * Your cards are "used to" high performance. Perhaps there is a history dependence? Mine is only 3 weeks old. What to do?
|
no sign of a signature
|
|
|
clegua
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2014, 03:22:26 PM |
|
Hi all. I am following this thread and I’ve tested some above tips, but I can’t get more than 450 KHash/s. I have two 7970 XFX DD (FX-797A-TDFC). I’ve tried undervolting one of my cards using the Vizakenjack’s bios so I have currently the following configuration: - One 7970 XFX DD with 1.125V (GPU 0) - One 7970 XFX DD with 1.175V (GPU 1) Using this script: cd C:\Users\PAC\Desktop\Minning\cgminer-3.7.2-windows setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 cgminer --gpu-engine 1050 --gpu-memclock 1500 --temp-target 72 --temp-cutoff 93 --gpu-powertune 20 --thread-concurrency 8192 -I 13 -g 2 -w 256 --lookup-gap 2 --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u PACmining.calamardo -p calamardo1 I get the following rates: http://i39.tinypic.com/zwgtjb.pnghttp://i40.tinypic.com/5n9n5h.pnghttp://i40.tinypic.com/2qkrmkm.pngSomeone knows what I am doing wrong or what can I do in order to improve my rates? Thanks in advance
|
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2014, 01:39:31 AM |
|
|
no sign of a signature
|
|
|
clegua
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 13, 2014, 03:05:52 PM |
|
Thanks a lot. I gonna try to flash my cards using the above settings, but using VB7 I am just be able to set 1.025V or 1.050V instead of 1.035V such as you are suggesting. How are you setting 1.035 V? Thanks again.
|
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/exclamation.gif) |
January 14, 2014, 05:15:24 AM Last edit: January 15, 2014, 11:11:47 AM by drakoin |
|
----------------------------------------------------------- UPDATE: HERE IS A NEWER BIOS VERSION January 15, 2014 ----------------------------------------------------------- old posting of January 14, 2014, 05:15:24 AM: -------------------------------------------- To help you all, I have made a package with - old ROM
- tweaked ROM
- screenshot what changed
- README text - do yourself the favour and be careful :-)
Here's your 7970-XFX-DD_bios-tweaked-by-DrAKoin_(FX-797A-TDFC).zipCome back to the discussion here for the currently best cgminer settings. Enjoy your energy savings! These are the settings that I have changed (top original / bottom tweaked): ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fcdn.overclock.net%2Fc%2Fcb%2F900x900px-LL-cbcaedce_7970_XFX_DD_Tahiti_MOD02.rom_beforeafter.png&t=665&c=rAyRtvkZpgOOQw) The purpose of lowering the voltage to 850 mV is not to run it with that voltage in cgminer (it would probably crash, 0.850 V is too low for most CC/MC settings), but to enable the whole range of voltages to be accessible from within cgminer. N.B.: This will save you a lot of money on you energy bills! I am poor. Please consider to tip me: BTC 15UipUK3kGcArJzRyHbVKrwG5TsqYi1b9N Thanks. And important for me: Tell me about it, so I can thank you personally.
Another option for donations is to let your rig run a bit for me, I have published a suitable cgminer.conf file here
----------------------------------------------------------- UPDATE: HERE IS A BIOS NEWER VERSION January 15, 2014 -----------------------------------------------------------
|
no sign of a signature
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 14, 2014, 06:58:00 AM Last edit: April 07, 2014, 04:24:00 PM by drakoin |
|
-- ------ - - - - ------------- - - - -- - -- -- - -- --- --- - - - -- - --- -- --- ----- - - ------ ---- - -------- --- - - -- - ---- UPDATE 23.1.2014: A summary of the analysis is in #103. If look deeper first, I suggest start reading there. You will be linked back here to #37. -- ------ - - - - ------------- - - - -- - -- -- - -- --- --- - - - -- - --- -- --- ----- - - ------ ---- - -------- --- - - -- - ---- ORIGINAL 14.1.2014 : -- ------ - - - - ----------- This thread is worth its weight in GOLD. Saves a lot on your electricity bill, more coins for less pollution.My so far best values are described here, in the table, as value (C), compared to the (0) stock values of the 7970 XFX DD (FX-797A-TDFC) with which it was delivered: | | voltage | CC | MC | CC/MC | temp | fanspeed | khash/s | Watt | khash/Watt | electricity | coins | profit/month | (0) | 1.175 | 925 | 1375 | 0.673 | 71 | 65% | 475 | 237 | 2.00 | 33 € | 86 € | 52 € | (C) | 0.893 | 854 | 799 | 1.069 | 67 | 45% | 578 | 153 | 3.78 | 24 € | 104 € | 80 € | |
With - an average 6 euros per day per megahash coins generated
- an offset of 70 watts because I have an old rig with only 2 cards in it, and the way the cards' Watts are given
- an electricity price of 0.256 euros/kWh; we all must finance the transition into renewables, we have reached 20% nation wide!
Advantages: - less noise, the fan is slower
- much less heat, my room is almost cool now :-)
- less temperature probably increases longevity of the cards
- less pollution, lower electricity bill
- more coins per day generated
--> Higher profitsThis thread is worth its kilobyte volume in GOLD.
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fcdn.overclock.net%2F1%2F13%2F900x900px-LL-13f010ab_www.tiny.cc_-improve7970.gif&t=665&c=kX0ZQQWjCAqp0w) - 0) Order / Borrow a Wattmeter / electricity usage meter / kill-a-watt.
- 1) Read the whole thread. Changing the BIOS of your card, and playing with voltage & clockspeed can destroy you hardware. You want to know what you do before you start with this. It's all your own risk!
- 2) Create your own ROM with VBE7. Or download the ROM that I provide for you. Read the README in the ZIP file!!!
- 3) run cgminer using the suggested cgminer.conf below.
- 4) Lower the voltage even more (same posting).
- 5) When found stable value, change your cgminer.conf; and please report back, together with exact name of your card, and ASIC quality.
. . N.B.: This saves you a lot of money on you energy bills! I am poor. Please tip me: BTC 15UipUK3kGcArJzRyHbVKrwG5TsqYi1b9N or other currencies. Thanks. Or let your rig run a bit for me, with these cgminer.conf pool settings. Then tell me about it, so I can thank you personally. (click)
|
no sign of a signature
|
|
|
Mestremuten
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 14, 2014, 07:24:00 AM |
|
To Drakoin: I'm new to mining, yesterday I installed my XFX R7970 Double dissipation Model NO: FX-797A-TD Part No: FX-797A-TDFC ver 6.0 to my computer (P6T deluxe OC to 3.82 Ghz). I use a 1000W PSU so no problem here. I tried to flash the bios with your first values, then I tried your command values. I observed some card crashes and recoveries and card misfunction (lines appearing and disappearing in the monitor). I returned to 1,175 V bios. My question is very simple: you are writing about mem clock, voltages etc.. but it is not clear what are the values of the bios, because you can change that values also in the bios and in the command line of the program. could you write down a post with your best bios parameters AND then the best command line paramaters? you can repeat the A, B , C you did, but better explained. thx (I'm from spain like you ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) )
|
|
|
|
drakoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 14, 2014, 07:45:52 AM Last edit: February 03, 2014, 04:45:54 AM by drakoin |
|
I observed some card crashes and recoveries and card misfunction (lines appearing and disappearing in the monitor).
just use a higher voltage. Perhaps the limits to optimizing are dependant on the ASIC quality of your GPU. I do a final undervolting after I found a good CC & MC value: 1) lowering the voltage slowly, e.g. in 0.020v steps 2) when crash at x volts (Catalyst crash / cgminer crash / BSOD) I always reboot(!). 3) try with x+0.015 or x+0.025 Volts, then long term test. 4) if still unstable, raise voltage even more. 5) if stable for >24 hours, report the value here in the forum could you write down a post with your best bios parameters AND then the best command line paramaters?
Ah, sorry, yes - I haven't changed them in ages, they are up in post #13. I don't use any command line parameters anymore. Start with this cgminer.conf ( edit c:\wherever\cgminer\cgminer.conf ): { "log" : "2", "scrypt" : true, "gpu-threads" : "2", "thread-concurrency" : "8192", "intensity" : " 13",
"gpu-engine" : " 854", "gpu-memclock": " 799", "gpu-vddc" : "0.975", "gpu-powertune":" 20",
"auto-fan" : true, "temp-target" : "70", "gpu-fan" : "0-85", "temp-overheat" : "85", "temp-cutoff" : "95",
"api-allow" : "W:127.0.0.1", "api-listen" : true, "api-network" : true, "api-port" : "4028",
"pools" : [{ "name" : "support mining for drakoin", "url" : "stratum+tcp://middlecoin.com:8080", "user" : "15UipUK3kGcArJzRyHbVKrwG5TsqYi1b9N", "pass" : "x"}] }
and then lower the voltage slowly like I described above. with the keystrokes g c 0 enter v in cgminer: (g)pu (c)change 0 [enter] (v)oltage I'm from spain
I once lived with hippies near Orgiva at the bottom of the Sierra Nevada. Very nice memories.
|
no sign of a signature
|
|
|
Mestremuten
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 14, 2014, 09:07:19 AM |
|
Ah, sorry, yes - I haven't changed them in ages, they are up in post #13. I don't use any command line parameters anymore. Start with this cgminer.conf ( edit c:\wherever\cgminer\cgminer.conf ): { "log" : "2", "scrypt" : true, "gpu-threads" : "2", "thread-concurrency" : "8192", "intensity" : " 13",
"gpu-engine" : " 854", "gpu-memclock": " 799", "gpu-vddc" : "0.975", "gpu-powertune":" 20",
"auto-fan" : true, "temp-target" : "70", "gpu-fan" : "0-85", "temp-overheat" : "85", "temp-cutoff" : "95",
"api-allow" : "W:127.0.0.1", "api-listen" : true, "api-network" : true, "api-port" : "4028",
"pools" : [{ "name" : "support mining for drakoin", "url" : "stratum+tcp://middlecoin.com:8080", "user" : "15UipUK3kGcArJzRyHbVKrwG5TsqYi1b9N", "pass" : "x"}] }
This is my main confusion, specs on post #13 are different from the list you have written. All I would love to know is that: core clock in BIOS: ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ? memory clock in BIOS: ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) voltage in BIOS: ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) gpu-engine in cgminer: 854? or 1025? gpu-memclock in cgminer: 799? or 1635? gpu-vddc in cgminer: 0.975? or 1.035? I understand the fact that 2 cards are not equal and I have to "play" with the cgminers parameters as you said to finally tune the progam. But first I would like to try to reproduce your results.
|
|
|
|
|