NobleCoin[NOBL] - 8% PoS | 1Yr+ | MARKETPLACE | PAY | GIFT | CHARITIES/MERCHANTS

[Cinqo]

Sure

Official version 2.0.4
https://github.com/eagleflies/noblecoin

Unofficial version 2.0.4.2
https://github.com/c1nq0/noblecoin
But never tried compiling on linux.

[1714179287]

1714179287

[1714179287]

1714179287

[1714179287]

1714179287

[Cinqo]

Guys

Also have a look at your clients that you don't have too many blocks locally.

This should be maximum 1610644

I see 1 peer with 1610645 blocks.

Just take the current blockchain from upper link (if windows)

[paramind22]

Sure no problem.

Just post your Noblecoin adress here.

Problem is with a stopped chain the transaction won't go through.

I don't have it synced and its been a long time since I staked it.  I stake about 12 coins and writing a book on it.

http://telicalbooks.com/Staking_Book_RSPearson.html

I could mention this coin in a book on staking. If we can get people excited and pump the book it would therefore pump the price and bring more supporters.   But it looks ingenious mentioning a coin that doesn't have an exchange.  Some of the coins I stake only have one exchange right now.

I don't mind syncing the chain with others right now.

THx for joining the synch.
If you have trouble synching, you can download the block chain from the link in a previous post.
Btw which exchanges are the other coins using. Anything usefull for us?

Southexchange, friexchange, altlilly, graviex, livecoin, unnamedexchange, and cratex.io are exchanges that smaller coins are on.


Maybe you can help with this.  I dl'd the newer wallet and it was syncing fine with about 6 connections.  Then  using the bootstrap was a little problematic for me.  Like I said, I stake actively about 12 coins so I have experience.  I noticed that the wallet put all the blockchain files in the application's directory, not in Appdata.  The wallet was crashing when I tried to put the bootstrap files in its appdata directory. 

A lot of bootstraps seem to be different, and somewhere I have information on a more exact science of it.  I will try again but if you have any comments that would appreciated.

[Cinqo]

Where did you get the bootstrap from?

You seem to use windows, so just download the full backup

Block Chain Backup 16/05/2020

https://gofile.io/d/IQere8

Also contains unofficial client version 2.0.4.2

You can put the files wherever you want.

Then in ...AppData\Roaming\NoblecoinPOS you just have to copy the Noblecoin.conf file.

Open the conf file with notepad (or other editor) and modify the parameter 'DataDir' to the location where you put the other files.

[lemonandfriesonetwo]

I have failed at trying to compile on Linux. Anyone been successful compiling Noble in Linux?

[Cinqo]

Just wandering...

Can we still mine blocks?

basicly no. This is allowed untill block 25200 ... 

POW blocks get rejected.

So we would need to fork off to enable this. (if we want this)

Pure POS is a bit risky anyway. Most coins are Hybrids.

ps: sorry for the monologue 

[paramind22]

Where did you get the bootstrap from?

quote: https://gofile.io/d/IQere8

Open the conf file with notepad (or other editor) and modify the parameter 'DataDir' to the location where you put the other files.

Yes, got it from there.  Will try again have been busy so I'm just letting it sync as is.

[yespornplease]

Over 600 pages of activity. I'm very glad I got in early, this is too much. It makes such a difference to time your investments and to leave and let them grow. Someone can tell more if this coin have a plan to accept at adult area chinese porn and veporn. I expect so much of this coin.
So thx developers, and everybody here.

[lemonandfriesonetwo]

Maybe someone can help with the errors compiling under linux:

g++: error: build/bitcoin.o: No such file or directory
g++: error: build/bitcoingui.o: No such file or directory
g++: error: build/transactiontablemodel.o: No such file or directory
g++: error: build/addresstablemodel.o: No such file or directory
g++: error: build/sendcoinsdialog.o: No such file or directory
g++: error: build/coincontroldialog.o: No such file or directory
g++: error: build/signverifymessagedialog.o: No such file or directory
g++: error: build/key.o: No such file or directory
g++: error: build/script.o: No such file or directory
g++: error: build/main.o: No such file or directory
g++: error: build/init.o: No such file or directory
g++: error: build/net.o: No such file or directory
g++: error: build/irc.o: No such file or directory
g++: error: build/checkpoints.o: No such file or directory
g++: error: build/db.o: No such file or directory
g++: error: build/walletdb.o: No such file or directory
g++: error: build/clientmodel.o: No such file or directory
g++: error: build/guiutil.o: No such file or directory
g++: error: build/transactionrecord.o: No such file or directory
g++: error: build/optionsmodel.o: No such file or directory
g++: error: build/transactiondesc.o: No such file or directory
g++: error: build/wallet.o: No such file or directory
g++: error: build/keystore.o: No such file or directory
g++: error: build/walletmodel.o: No such file or directory
g++: error: build/bitcoinrpc.o: No such file or directory
g++: error: build/rpcdump.o: No such file or directory
g++: error: build/rpcnet.o: No such file or directory
g++: error: build/rpcmining.o: No such file or directory
g++: error: build/rpcwallet.o: No such file or directory
g++: error: build/rpcblockchain.o: No such file or directory
g++: error: build/rpcrawtransaction.o: No such file or directory
g++: error: build/overviewpage.o: No such file or directory
g++: error: build/crypter.o: No such file or directory
g++: error: build/noui.o: No such file or directory
g++: error: build/kernel.o: No such file or directory
make: [Makefile:513: noblecoin-qt] Error 1 (ignored)

[penambang]

Maybe someone can help with the errors compiling under linux:

g++: error: build/bitcoin.o: No such file or directory
g++: error: build/bitcoingui.o: No such file or directory
g++: error: build/transactiontablemodel.o: No such file or directory
g++: error: build/addresstablemodel.o: No such file or directory
g++: error: build/sendcoinsdialog.o: No such file or directory
g++: error: build/coincontroldialog.o: No such file or directory
g++: error: build/signverifymessagedialog.o: No such file or directory
g++: error: build/key.o: No such file or directory
g++: error: build/script.o: No such file or directory
g++: error: build/main.o: No such file or directory
g++: error: build/init.o: No such file or directory
g++: error: build/net.o: No such file or directory
g++: error: build/irc.o: No such file or directory
g++: error: build/checkpoints.o: No such file or directory
g++: error: build/db.o: No such file or directory
g++: error: build/walletdb.o: No such file or directory
g++: error: build/clientmodel.o: No such file or directory
g++: error: build/guiutil.o: No such file or directory
g++: error: build/transactionrecord.o: No such file or directory
g++: error: build/optionsmodel.o: No such file or directory
g++: error: build/transactiondesc.o: No such file or directory
g++: error: build/wallet.o: No such file or directory
g++: error: build/keystore.o: No such file or directory
g++: error: build/walletmodel.o: No such file or directory
g++: error: build/bitcoinrpc.o: No such file or directory
g++: error: build/rpcdump.o: No such file or directory
g++: error: build/rpcnet.o: No such file or directory
g++: error: build/rpcmining.o: No such file or directory
g++: error: build/rpcwallet.o: No such file or directory
g++: error: build/rpcblockchain.o: No such file or directory
g++: error: build/rpcrawtransaction.o: No such file or directory
g++: error: build/overviewpage.o: No such file or directory
g++: error: build/crypter.o: No such file or directory
g++: error: build/noui.o: No such file or directory
g++: error: build/kernel.o: No such file or directory
make: [Makefile:513: noblecoin-qt] Error 1 (ignored)

what is your build environment? I don't have any problems compiling Noblecoin-QT on Ubuntu 18.4 using qmake

[Cinqo]

Hey guys

Any update?
We still seem to be stuck.
MY last staking are slowly dropping weight. I have no idea why they don't just want to stake.

btw still 1 peer with 1610645 (see below). If this is you, please try disconnecting and resync)

Code:

"addr" : "73.136.202.216:54340",
"services" : "00000001",
"lastsend" : 1590521278,
"lastrecv" : 1590521278,
"conntime" : 1590479856,
"version" : 89000,
"subver" : "/Noblecoin:1.0.0.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 1610645,
"banscore" : 0

[lemonandfriesonetwo]

I just used Wine to run Noble, but the blockchain download does not sync and the wallet is taking a long time to sync.

[paramind22]

I just used Wine to run Noble, but the blockchain download does not sync and the wallet is taking a long time to sync.

Yes, the blockchain download must have problems.  This is often the case unless someone really knows how to create a bootstrap.  There should be clear instructions also.  When I put it in Appdata I get a crash every time.  I did printscreen the error but it's on another machine right now.

It would be great to get this coin going with a new team and find a few exchanges.

[lemonandfriesonetwo]

Maybe someone can start a discord server for Noble and everyone can figure it out from there.

[Cinqo]

I made a bootstrap.
Does this work?

Code:

https://gofile.io/d/stbDu2

Synch is very slow. You seem to be limited to 500 blocks per connection.
I usually restart my client serveral times to restart the process is I need a big resync.
Check you debug file ... ( is this also on linux???)

To restart coin, I don't know at the moment.

Only final option I see is fork off to Hybrid wallet.
But we need full community update for that and update of block explorer.

Currently clients don't accept Pow blocks over 25200.
Also probably pow award of 1000 NOBL is a bit too high...

[paramind22]

Here are some notes I took from somewhere:

To make a bootstrap file you just need to copy blk0001.dat and rename it to bootstrap.dat

However, if you must take the whole folder, ensure you have the Detach Databases at Shutdown option checked to make a portable bootstrap

There are more things based on what type of wallet one is using. 

[Cinqo]

oh I used this version

https://cryptochainer.com/dir/?page_id=154

Include both blk001.dat and BlkIndex.dat

I guess you can try both.
Let us know what works.

[Cinqo]

Seems like I found a weakness in the block chain ... (decentral ones at least)
It requires you work with other people... 

The weight of my coins keeps dropping. Now it's going below 200, with most of my coins already at overmaturity.

Seems like we made a mistake using the Magicoin algorithm for calculating stake weight. Meaning your weight can actually go to 0 (zero).
On top of that NobleCoin was modified to be POS only after initial premining.
Basicly meaning, we can get in a situation where all transactions/coins overmature (weight = 0 ) and the chain just stops functioning because no one can stake anymore.
We are very close (if not there) to this situation right now.

Without the backup that MagiCoin has of Pow block creation...

Anyone trying to restart this chain, please keep in mind that transaction from (at least) before dec 2019 have a weight of 0.
If you didn't do any transactions since then, there is no point is syncing (but you can still try if you want..)

So basicly as said before I only see 2 options: Say goodbye to this coin OR fork off into a hybrid wallet allowing Pow block once more.

As always with block chain, this is a community effort and a community decision...

I would like to hear other peoples opinions and if they see other options moving forward.

[lemonandfriesonetwo]

Time to fork then, original dev is gone so if you want to do the honors I don't think anyone will oppose you.

[Cinqo]

Sure no problem. I will setup a github branch for this version.

EDIT: https://github.com/c1nq0/noblecoin/tree/Develop2.1.0.0PowWallet (Work in progress)
(Feel free to join in)

To Do List:

* Modify code to allow Pow Block: This is not so hard. as said before we have been allowing Pow block until height 25200. We basicly just need to increase the maxPOWlimit.
* Determine Pow Reward: Personally  I would make this something low, maybe 5 to 50 NOBL. Currently set at 1000 NOBL, which I think might be too high.
* New Wallet version: I suggset v2.1.0.0  with protocol 90000. Lower protocols will be disabled.

Personaly I can make the windows client.
For making and testing clients for mac and Linux. I would need help from you guys.

* Also main point is also that we convince CryptoID to upgrade to the new wallet version, so we don't lose our block explorer.

Any thoughts?


I've sent a messga to Fairglu (CryptoID - block explorer), with the question if he would follow our fork-off.
Will keep you posted...

If someone maybe have direct contact with Fairglu, maybe you can also ask.



Ok  guys

https://github.com/c1nq0/noblecoin/tree/Develop2.1.0.0PowWallet

Code has been modified to allow for POW blocks.
version set to v2.1.0.0 with protocol version 90000
New client will not conncet with lower versions.
POW reward has been set at 5 NOBL + fees.


Windows client has been tested for POW.

We still need someone to test the code for linux and mac. (This I can't do)

Please report bugs here are in Github.
If someone has time, they can check and adjust the documentation for Linux and mac.

Any other remarks ofcourse are also welcome.
This is a community effort after all.

Once we finish test we can release the new client and have the block explorer updated.



lemonandfriesonetwo a or penambang, Can you verify that the code is compilable on Linux?


[moderator's note: consecutive posts merged]