Sadly being ignored through both emails:
david@bittech and contact@bittech
On another note - I replaced the capacitor with just a standard 470uf 16v capacitor. Doesn't even need to be surface mounted and seem to have a bit of success on a missing cap on the board.
I don't think its quite right yet though as the Utility side on the stats side is showing half of what it needs to be.
Not sure if it is cap charging up or whatever.
However for those of you missing caps you would be able to find these caps in any electronics shop.
I believe they just need to be a electrolytic capacitor. And you need to get the numbers right. Cap showing 180uf and 16v but was told 470uf 16v was okay.
If i am however wrong on the numbers please someone advise me and I can try a different cap.
When soldering cap please make negative pointing into the module. Positive is the part closest to the edge of the module or you will blow the cap.
https://i.imgur.com/kYbShUF.jpg