philipma1957
Legendary
Offline
Activity: 4242
Merit: 8490
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 07, 2018, 08:59:15 PM |
|
I've been saying exactly that for three years, since S7 rolled out, but it looks like that kind of high-dense chipsinked package is becoming everyone's de-facto standard (except Avalon, thankfully).
There's no good reason not to build KW/sub-KW miners. Site density stopped being an issue back when people started using shelves instead of racks.
1.4KW is already difficult in that case size, without adding half again to it. Especially since all evidence points to smaller nodes having more issues with heat density in the dies, so the chips probably can't be allowed to run continuously at 120C die temperatures without a high risk of roasting before the machine's expected end of viability.
add on the lack of speed control. they will run balls to the wall. Avalon has various settings one is about 990 watts Halong t1 with -ck firmware low setting is about 1300 watts
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 07, 2018, 09:18:11 PM |
|
I've also been saying that full control of core clock and voltage are necessary features but nobody does that anymore. Probably for idiot-proofing. It is handy some have at least partial options.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8490
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 07, 2018, 11:20:11 PM |
|
I've also been saying that full control of core clock and voltage are necessary features but nobody does that anymore. Probably for idiot-proofing. It is handy some have at least partial options.
yeah over clocking morons caused lots of returns. Sooo no more voltage controls. To me I rather run all gear at 60 to 80 percent of tops speeds and volts. But no can do.
|
|
|
|
Thetaj (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 08, 2018, 04:58:29 AM |
|
yeah over clocking morons caused lots of returns.
Sooo no more voltage controls.
To me I rather run all gear at 60 to 80 percent of tops speeds and volts.
But no can do.
Yes can do, but you'll void the warranty on the S9s, You can do that on the 841s already but so far I found it unnecessary since -2 turns good yield with good power draw already. I think GMO maybe releasing a smaller miner for home users late this year or early next year thats got lower power draw and lower speed from the looks of it. Apparently this machine is for "Large server farms". Also if you haven't noticed, the reason the price is so high is because they are mining themselves and they're not going to sell it at lower premiums
|
|
|
|
cuteman
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 08, 2018, 01:16:55 PM Last edit: June 09, 2018, 12:58:20 AM by frodocooper |
|
1.4KW is already difficult in that case size, without adding half again to it. Especially since all evidence points to smaller nodes having more issues with heat density in the dies, so the chips probably can't be allowed to run continuously at 120C die temperatures without a high risk of roasting before the machine's expected end of viability.
GMO designed the machine in Japan, which is known for high quality. This means their rigs may outperform the china competitors in terms of quality. Designed in Japan, produced in Taiwan ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FBqVudsM.png&t=665&c=65eYc1_bsrpeSg) I would not be surprised if they offer 1 year warranty. This can be a big advantage.
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
So what, they're using air with a higher specific heat? Epoxy with zero thermal resistance? 300CFM fans that don't spin at 10KRPM and draw 100W to do it? Have they discovered a heatsink profile with no solidity and perfect heat transfer, and made sure to place every single one to avoid vortices?
Quality or not, the physics of air cooling is a big limitation. Look at all the issues we already have with heat unreliability on 16nm and 10nm and think how much worse it's going to be on 7nm, which has basically never been tested before this point.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8490
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 08, 2018, 01:35:18 PM |
|
So what, they're using air with a higher specific heat? Epoxy with zero thermal resistance? 300CFM fans that don't spin at 10KRPM and draw 100W to do it? Have they discovered a heatsink profile with no solidity and perfect heat transfer, and made sure to place every single one to avoid vortices?
Quality or not, the physics of air cooling is a big limitation. Look at all the issues we already have with heat unreliability on 16nm and 10nm and think how much worse it's going to be on 7nm, which has basically never been tested before this point.
Well 1950 watts or 1990 watts either way it will be roasting hot. Even if they offer a semi speed control like -ck did with the T1 (nice work on his part) Or voltage offset like the Avalon 841 I can state it is a moron move to run 1950-1990 watts on that size and shape. The density is not that important. Cooling and efficiency are important. They have began with a good chip (maybe) and put it in a moron shape. How about same size box doing 12th at 972 watts? with low medium fast speed settings. The gear they built with not like air cooling it will want ac and a colder room which makes the power savings lost. All these smart guys and they sell this in a stupid box. I tell you what does this gear come on Nov 3 since it shipped on Oct 31? And if it does come on Nov 3 How much do you want to bet that bitmain beats them to market with the s-11 with 17 th doing 1377 watts. same efficiency and cost of 1400? How will GMO look then. They really fucked up doing a pre order with Oct delivery.
|
|
|
|
taserz
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 800
Merit: 293
Created AutoTune to saved the planet! ~USA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 08, 2018, 08:50:26 PM Last edit: June 09, 2018, 01:02:35 AM by frodocooper |
|
this style of selling only feeds into bitmain
[...]
I mean you can't really reverse engineer a 7nm chip. Also they didn't bribe anyone to make it faster than the sia they just did it a really inefficient way which allowed them to come to market faster even though the efficiency was shit compared to the others but they didn't care because they flooded the market.
Okay so let us say that GMO is bigger $$$
they still went in the wrong direction here.
[...]
I mean the biggest issue I see with a lot of mines is they are all going for high density well at least the services and business I use. So okay yeah you need more cooling to cool it down but if you have the hot and cold isles built for this kind of air movement your right as rain. Also for the 2kw these draws you figure on a 60amp pdu @ 240 you can run 7 of these off a 60amp pdu well maybe wil the rule of 80 your looking at 6 but that is almost using a full load. Granted the bigger miners with big power rails none of this really matter to them as pdu's are not an issue. When I had the majority of miners in my basement my issue was space. I had 40 miners and I did not have a way to put them all into the hot box. The hot box had proper cfm to vent it out but venting in 40 4inch ducts is just a mess when if I can do just 10 ducts I am right as rain. But I see your complaint but those of us and those who have to deal with high density due to limited room these could be great.
|
|
|
|
ccgllc
Copper Member
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 658
Merit: 101
Math doesn't care what you believe.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 08, 2018, 11:33:27 PM |
|
I mean the biggest issue I see with a lot of mines is they are all going for high density well at least the services and business I use. So okay yeah you need more cooling to cool it down but if you have the hot and cold isles built for this kind of air movement your right as rain. Also for the 2kw these draws you figure on a 60amp pdu @ 240 you can run 7 of these off a 60amp pdu well maybe wil the rule of 80 your looking at 6 but that is almost using a full load. Granted the bigger miners with big power rails none of this really matter to them as pdu's are not an issue. When I had the majority of miners in my basement my issue was space. I had 40 miners and I did not have a way to put them all into the hot box. The hot box had proper cfm to vent it out but venting in 40 4inch ducts is just a mess when if I can do just 10 ducts I am right as rain. But I see your complaint but those of us and those who have to deal with high density due to limited room these could be great.
But many mid-size farm, like mine, have pre-wired expecting 20 amp 220V to be split between 2 devices, not one.
|
Mined for a living since 2017. Dabbled for years before that. Linux admin since 0.96 kernel and Slackware distributions on (4) floppies...
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3738
Merit: 2667
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 08, 2018, 11:39:33 PM Last edit: June 09, 2018, 12:28:42 AM by NotFuzzyWarm Merited by frodocooper (3) |
|
Frankly, one does have to wonder where folks get their 'increase in efficiency' as node size get smaller figures from. Please explain your reasoning. Is it that you expext x amount of size reduction to equal the same x amount of power savings? Bzzzt. The Real World doesn't work that way. Lets see, Inno's A1 28nm chip back in late 2013: promoted to run 1.25x faster and 15% lower power than the Real World proved but - when put into a good design the chips still were/are rock-solid. ref the various Dragon miners from 2014 that are still around. I still have my uber-rare 1THs A1 miner from AMT, one of maybe 5-6 ever delivered by AMT before it went under as one of the casualties of the ill-fated, horrifically bad Bitmine.ch A1 hash board designs. Same year, 2014, had several failed 28nm designs, BFL Monarch, the Minion chip, and others. Most failed because of the extreme power-density of the designs and insufficient cooling systems. Then BM nailed the 28nm node with their s7 chip. Time passes and the 16nm s9 chips arrived ruling as most efficient ( reference needed: last S7 chips vs first S9 chips. Did the size drop match eff increase? No, but how far off?) but even as early as the s4 BM began pushing power density. Their S5+ began their current shoe box packaging now copied by everyone, warts and all.. Everyone but Canaan with their Avalons that is. Only they seem to have taken the time and thought out proper internal design of the hash boards and heat sinks.... Back to node size/efficiency: The 10nm eBang eBit and Halong/Inno Dragonmint T1 miners began shipping early this year. The eBang 10nm efficiency is worse than their earlier 16nm miners plus it seems the their miners are dying on the vine. The Halong 10nm efficiency cannot really be compared due to the (minor) effective hash rate increase from it using asicboost. That said, despite -ck doing extensive performance tweaking (paid by MyRig and NOT Halong btw) people are reporting the T1 efficiency at advertised speed is less than a s9. Only when dropped to top s9 speeds of around 14THs and less does it match/slightly beat the s9. Now GMO is pre-selling their 7nm miner with delivery starting Oct (or later). Pre-selling- as did Halong - with advertised specs that said pre-sale Investomers are expecting to achieve with no 'oh by the way the pool must support AB' surprises like Halong pulled or other such crap. Even more power density cooking a node size that even more than the 10nm node is meant for far cooler running, low power (mobile) chips.... Leakage from electrons quantum tunneling between the conductors will be even higher. Hmm, wonder how this will turn out.... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
ccgllc
Copper Member
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 658
Merit: 101
Math doesn't care what you believe.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 09, 2018, 03:27:11 AM |
|
Then BM nailed the 28nm node with their s7 chip. Time passes and the 16nm s9 chips arrived ruling as most efficient (reference needed: last S7 chips vs first S9 chips. Did the size drop match eff increase? No, but how far off?)
S3 478GH, 28nm silicon, 366W = 1.306GH/W at the chip = 0.766 W/GH S4 2000GH, 28nm silicon, 1450W = 1.279GH/W "at the wall" (maybe) ~= 0.725 W/Gh S5 1155GH, 28nm silicon, 590W = 1.958GH/W = 0.511 W/GH (just goes to show what can be down within a chip 'size') S7 4500GH, 16nm silicon, 1293W = 3.480GH/W at the chip = 0.287 W/GH - a 1.78X factor in power consumption improvement for a 1.75X decrease in die size - pretty linear. S9 13500GH, 16nm silicon, 1323W = 10.20GH/W at the chip = 0.098 W/GH - a 2.93X improvement in power consumption via better chip design vs. the S7. So I'm guessing a shinkage of die size can be estimated to make linear improvement in power consumption, perhaps. Here is hoping this doesn't get deleted for being "off topic" in a speculation forum...
|
Mined for a living since 2017. Dabbled for years before that. Linux admin since 0.96 kernel and Slackware distributions on (4) floppies...
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 09, 2018, 03:39:46 AM |
|
BM1385 in the S7 is a 28nm chip, and has a bottom-clock efficiency around 0.18J/GH with decent hashrates still around 0.22J/GH; the 700MHz operating point setpoint of 45-chip S7 was past the knee of the efficiency curve and we also lost ~10% of power, board-level, to the 45A single-phase main regulator plus around 50W machine-level just for fans. Chip-level, the BM1385 was not much worse than some others' early 14/16nm designs.
|
|
|
|
Thetaj (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 09, 2018, 07:10:23 AM |
|
But many mid-size farm, like mine, have pre-wired expecting 20 amp 220V to be split between 2 devices, not one.
Amen to that
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8490
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 09, 2018, 12:54:49 PM Last edit: June 10, 2018, 08:43:49 AM by frodocooper |
|
But many mid-size farm, like mine, have pre-wired expecting 20 amp 220V to be split between 2 devices, not one.
Never wrote that taserz wrote it. and a hard wire 2 outlet circuit at 20 amps would be asked to do 20x 240 = 4800 x 80 percent that is 3840 watts or worse 20 x 220 = 4400 x 80 percent that is 3520 watts since this says it is 1950 or 1990 you are doing 3900 watts to 3980 watts I have gone past 80 percent derate and in a hotter setup it has issues. I would not want 100 of these doing 398,000 watts which could be 3980/4400 = as high as 90.45 % vs 80% Yeah in canada or iceland not that hot but plenty of hot mining spots are around if you have robust volts (240) you are at 3980/4800 = 82.92% which may be okay My area is 239 to 243 volts which is helpful.
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 09, 2018, 01:18:34 PM |
|
And if you're on 208V and derate to 80%, a 20A circuit gets you 1 machine (and 48% utilization); 30A circuit gets you 2 (and 64% utilization). Though a 60A PDU and 80% derate would run exactly 5 without a lot of overhead.
208's pretty common for industrial-scale electric, even in datacenters.
And the point still stands that the power density and cooling requirements mean these'll only run where your intake temperatures are regulated to probably 60F and lower. In my farm, that means I could run one for at most five months out of the year. If someone bought one and sent it here for hosting I'd have to turn it down. Got enough trouble keeping S9s cool May through August.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8490
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 09, 2018, 01:41:53 PM |
|
And if you're on 208V and derate to 80%, a 20A circuit gets you 1 machine (and 48% utilization); 30A circuit gets you 2 (and 64% utilization). Though a 60A PDU and 80% derate would run exactly 5 without a lot of overhead.
208's pretty common for industrial-scale electric, even in datacenters.
And the point still stands that the power density and cooling requirements mean these'll only run where your intake temperatures are regulated to probably 60F and lower. In my farm, that means I could run one for at most five months out of the year. If someone bought one and sent it here for hosting I'd have to turn it down. Got enough trouble keeping S9s cool May through August.
The biggest reason I kept the t1s was -ck s speed control. Low 14.4 th Medium 15.5 th Fast 16.5 Th. That low setting solves my cooling issues in the summer . The company GMO now has a hotbox doing 1950-1990 watts taking money for preorders . First will it do all pools I don’t know Second can I run it at 80% to avoid overheating I don’t know. Yeah I get it that industrial spots may have really good cooling. But a lot of farms do not cool that way.
|
|
|
|
mgoz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2018, 03:34:42 PM |
|
I was watching the english version of the presentation and these apparently have some kind of GPS tracking enabled that they say is for locating during theft. They claimed they are already testing/mining with a B1 miner, which is not for sale to the public. B2 is still only in tape-out and they have no chips yet. Warranty is only 180 days.
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3738
Merit: 2667
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2018, 03:55:15 PM |
|
these apparently have some kind of GPS tracking enabled that they say is for locating during theft. I doubt they are using GPS as interference from the miners would pretty much keep it from acquiring satellites. More likely it is just simple IP address lookup being used. Question is: Are the miners constantly phoning home or does it only happen during boot? Where are the miners reporting to - a GMO site? If the tracking 'is for theft prevention' that implies that the miners can also be remotely shutdown ala' the Bitmain Antbleed kerfuffle. Can't wait for the rampant speculation to start on this one... Anyone need pitchforks and torches? The last thing I want is ANY device be it a miner, TV, computer, whatever, to be phoning home. Hell, I even keep GPS/location reporting turned off on my phone.
|
|
|
|
szlfsz
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 18, 2018, 03:55:07 PM |
|
Does the actual unit have 2 network ports like the renderings and are they using the extra port to make them daisy-chainable?
there is a "spec" for it on their site, what states: Daisy Chain MAX 32 units.. .whatever this means, I am curious if anyone has some actual info on this! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
fanatic26
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2018, 06:05:08 PM |
|
I figured I would chime in from my perspective running a large scale datacenter.
The powerdraw and the anticipated heat problems are both deal killers. I would have to build a whole new power infrastructure to run these things and id end up with like 2 machines per shelf. Its a waste of space to try and shoehorn these into an existing setup. Obviously the things wont run in pretty much any crypto datacenter with the heat they will be pushing out. I dont know of any datacenter not in the arctic that can run cold enough in the summer to keep these things online. This is all not to mention how new, unproven, and quite probably unreliable the first generation of these miners/chips will be. I *might* order one as a test, but im leaning towards not bothering unless there are changes to the packaging and power requirements.
Also, Bitmain has delayed their next new miner and im betting they will release it just in time to take the wind out of GMOs sales. Better to go with the devil you know rather than the devil you dont. Bitmain will ship an as advertised unit and they will most likely ship it on time. As much hate as they receive they do get the job done.
|
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
|