Will this work for charge and sync¿?
Basically my usage will be a Little bit different that bitcoint miner, we need to use as a charging and sync station.
I know the total AMP for both of them
10 port [10amp] =
• 5 devices of 1.0a (Charge & Sync)
• 2 tablets of 2.1a (Charge & Sync)
• Total load 9.2amp
¿Am I right?
19 port [20amp] =
• 9 devices of 1.0a (Charge & Sync)
• 5 tablets of 2.1a (Charge & Sync)
• Total load 19.5amp
¿Am I right?
49 port [75amp] =
• 38 devices of 1.0a (Charge & Sync)
• 15 tablets of 2.1a (Charge & Sync)
• total load 70.5amp
¿Am I right?
In resume, is the AMP measure by usb port or by total load?. Could I buy a 100amp 5v PSU for the 49 USB port? In order to supply 2.1a to all of the ports
I think with this Cable the load 2A is no problem for the HUB
you can load one equipment over two ports!?
Power Adapter USB Cable 2xUSB
For connecting devices such as USB hard disks when the power provided by one USB port is not sufficient
The power is provided parallel to the first power interface.
• 1x USB port data/power,
• 1x USB connector data/power
• 1x USB power connector