klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
January 16, 2014, 03:45:20 AM Last edit: September 09, 2015, 06:17:59 AM by klintay |
|
Industrial 19 port Steel casing USB Hub (with power cable & USB cable) 20 Amps @ 5v Both 220/110 voltage options available *** PROPERLY supports Red/Blue/Ice Fury 2.6 Ghs AND Bi-Fury 4+ Ghs USB miners*** DescriptionThis is a 19 port hub with an integral power supply that is capable of reliably supplying MORE than 700mA per port without overheating or becoming a fire hazard. Comes with usb and power cables, everything you need to make the hub work out of the box. - Fully 480mb/s at each port - 16 Front facing Standard A USB ports - 3 Side facing Standard A - 1 Master hub connection Standard B for connection to Computing Equipment or other hubs - Fully fused internally via multiple poly-fuse resettable fuses both on each individual port and on the main power feed to the Ports. - UK/EU/USA Plugs available! - Hub runs COOL - Colour: Silver Unlike cheaper USB ports that only implement links at USB 1.0 standard (12mb/s speeds but state they are 'compatible' with USB 2.0) this is a professional FULL 480 Mb/s port that complies and implements the full 2.0 USB standard. It may also be used to connect to generic USB 1.0 equipment. The good thing about these hubs is that you can load them up with 19 Bi-Fury miners (around 76 gh/s) and the miners would STILL run as intended. Pricebitcoin/paypal: $150 usd Weight 2.2 Kg each hub Payment Methods1. Bitcoin: you can just pay BTC and attach the transaction details to this thread. 2. Paypal (PM me for details) Bitcoin Payment Address: 16NqeYCSwU8fx7FhEpQiuYGaQJgssDuuwS Send Address by PM, with copy of BTC transaction ID, so we can tie it all together!!! You MUST give country so we can set voltage switch before shipping!!! SHIPPINGThere are two options available: 1. Expedited Airmail (Speed post) with tracking number (2-5 days): $70 usd (additional items +$30 usd) 2. Normal Airmail with tracking number (5-14 days) : $40 usd (additional items +$20 usd) The time it takes for normal airmail really depends. I have seen it as fast as 4 says to places like USA. Right now isn't a busy time so they should be no delays. I have regular shipments going to the post office Monday, Wednesday, Friday and Saturday I really NEED the following PM info: 1. Full address (if this is wrong then it CANNOT be delivered) 2. Phone number (if express, so the carrier can arrange delivery) 3. Voltage you want it set to 110/220 4. price you translated at (So it is visible if you got the discount for BTC) BackgroundWhy our hub is 'special'? (ungrounded BUCK convertors on mains supply are potential killers) A point than not many people know is that over 90% of the powered USB hubs on the market are actually 'defective', and in many cases have an inherent and potentially dangerous electrical fault.(It's why Chicks in China keep electrocuting themselves when answering a charging mobile), this is what happens when you design products in isolated labs with little regard for the environment they are used in. (then rip the design without understanding the implications and decision making) Potentially one of the reasons why we keep seeing so many people with USB chains that go down or fail to recognize devices when they are plugged in. Usually the people with the SBC's ( Pi, etc) are more prone to these faults, because these powered USB hubs usually come with a PSU that has been ripped from a phone PSU design and as such were never designed to operate in a USB environment worse many USB implementations incorrectly mix the shield with the 0V line. A very simple test….. Take your USB hub PSU and measure the output voltage, you should see about 5-12v. Now… find an earthed point (metal computer case) and measure first from GND to the center pin of the 5-12v PSU and then GND to the outside tab of the 5-12v PSU.(making a note of the readings each time) On the shitty PSU's you can maybe read as much as 120-160v between the PSU & GND. So….. the question is… when you have your nice shiny computer running, and you plug in your 10USD USB hub with the external PSU, WTF does the 120-160V difference in potential go once the supply is no longer floating? (…. yep into the GND connection of the connected USB equipment, which then throws the USB silicon out of wack & possibly causing latch-up of the silicon.) Powered USB hubs are a VERY bad idea unless they are EARTHED and have PSU's DESIGNED with a Delta.!!!! A REALLY REALLY cool trick is that if you 'stack' multiple 'cheap' powered hubs into each other and reverse the PSU two pin plugs, you can build a voltage multiplier.
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
January 16, 2014, 03:50:53 AM |
|
|
|
|
|
Dabs
Legendary
Offline
Activity: 3416
Merit: 1912
The Concierge of Crypto
|
|
January 16, 2014, 04:22:56 AM |
|
klintay was one of my buyers from the recent Blue Fury USB miners. Good buyer!
|
|
|
|
Beastlymac
|
|
January 16, 2014, 07:28:06 AM |
|
Nice hubs Klintay.
|
Message me if you have any problems
|
|
|
freddyfarnsworth
|
|
January 22, 2014, 02:47:51 AM |
|
Nice ! I would say the best available at this point.
|
BTC: 1F1X9dN2PRortYaDkq89YJDbQ72i3F5N3h MEOW: KAbvy9jrrajvN5WLo7RWBsYqYfJKyN9WLf DOGE: DAyKSrTiVeRZaReTu1Cyf5Je6qPdKTuKKE
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7884
'The right to privacy matters'
|
|
January 27, 2014, 02:05:17 PM |
|
Freddyfarnsworth is correct these are the best quality hub that I have put my hands on. I have had 10-15 different hubs and for bitfury sticks none of them work as well as these do. I am running 16 ice 'nano' fury sticks clocks of 54 and 55 on one of these. they just work. I did 16 at freq 54or 55 on this hub. no power errors This hub does only 7 of 10 at 54 with an occasional power error the classic sign of a lack of power on a nano fury overclock is this line of type in bfg miner. NFY 0 : Frequency drop over 50% detected reinitializing . with this repeating a lot you need to drop your oc. well I can't get all 55 over clocks with this hub but I get 16 working 10 at 55 over clock and 6 at 54 overclock zero power warnings. the 16 sticks are doing 2.5-2.6 each so 16 sticks get 41gh and use 55 watts k-a-watt meter. I purchased one from razorfishsl on this site. I liked it so much I bid on an ebay auction for a second one and I now have a second one coming in. I posted here because the ebay auction was done by klintay. I hope to get it soon. the last one took 8 days was held in customs four days or would have been quicker. These are so much better then any hub I have used. especially better with bitfury chips.
|
|
|
|
madao
|
|
January 29, 2014, 07:43:01 PM |
|
I received my hub today. seems good, currently loaded with 11 Nanofury yellow jackets and three usb erupters. Would have more, but my stupid laptop's usb controller apparently cried uncle Want more, will be in touch
|
1PgVAFtdNoKeFDmCc6Vq2jd72au8qjj8wE
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7884
'The right to privacy matters'
|
|
January 30, 2014, 06:54:08 PM |
|
|
|
|
|
Nemo1024
Legendary
Offline
Activity: 1680
Merit: 1014
|
|
January 30, 2014, 09:16:03 PM |
|
Received the hub today: really nice piece of equipment. And I can confirm that it's compatible with Raspberry Pi. I posted the first part of my review in the hubs thread here.
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
razorfishsl
|
|
January 30, 2014, 10:33:13 PM |
|
Received the hub today: really nice piece of equipment. And I can confirm that it's compatible with Raspberry Pi. I posted the first part of my review in the hubs thread here. *Important tip DO NOT use Swan necked fans directly into USB ports. The Swan Neck will Destroy the sockets. Razorfishsl
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
January 30, 2014, 10:51:24 PM |
|
Razorfish is right be careful with the fans. I wonder if there is a way to repair damaged sockets? I have used a few other hubs. no links and I use higher quality power bricks
This 19 port hub is far far far better for the bit fury chip. I run ice fury on it and they are better on these hubs then any of the hubs above.
I run ant miners and you don't need this hub for an ant miner unless you want to go to the 2.2 overclock . I want to thank the op for shipping this quickly to me. thanks phil
You are welcome mate! They do work fantastic with the bitfury chips which require that extra bit of extra juice to get their full potential.
|
|
|
|
razorfishsl
|
|
January 30, 2014, 11:40:15 PM |
|
For damaged hubs I can offer a repair service.
Please PM for details.
RF
|
|
|
|
Dabs
Legendary
Offline
Activity: 3416
Merit: 1912
The Concierge of Crypto
|
|
January 31, 2014, 03:18:07 AM |
|
Mine is stuck in the post office. Will get it next week.
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 01, 2014, 09:46:45 AM |
|
PM you the information you requested to help with post office. Mine is stuck in the post office. Will get it next week.
We still have 12 units left
|
|
|
|
Nemo1024
Legendary
Offline
Activity: 1680
Merit: 1014
|
|
February 02, 2014, 04:39:14 PM |
|
The second part of my review, mixing 3 different miners in the hub, is here.
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 03, 2014, 12:09:20 PM |
|
The second part of my review, mixing 3 different miners in the hub, is here. Nice review, i would be interested in seeing how these handle the bi-fury miners as well...might need to wait for the price of them to come down a little first though.
|
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 04, 2014, 05:13:06 AM |
|
payment received. will update tracking information soon.
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
February 05, 2014, 07:00:47 AM |
|
Good day,
I would be interested in the HUB, what would be the BTC price including shipping to Austria?
If the hub sent as a gift, because of the customs? HUB is 100% compatible with RaspberryPi?
They have a photo of the back, for a possible wall mounting?
regards
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 05, 2014, 08:55:53 AM |
|
Good day,
I would be interested in the HUB, what would be the BTC price including shipping to Austria?
If the hub sent as a gift, because of the customs? HUB is 100% compatible with RaspberryPi?
They have a photo of the back, for a possible wall mounting?
regards
There is a 6% discount for btc orders. The price including shipping to Austria is $210 usd/ 0.259btc (according to current coinbase btc price) with the 6% discount that is 0.244btc in total. They are compatible with RaspberryPi and just send me a message once you make payment with your delivery details/special customs requests etc. Not too sure about the back mountings but will upload pics shortly for you to see for yourself.
|
|
|
|
Felipeo
Sr. Member
Offline
Activity: 476
Merit: 262
EOSABC
|
|
February 06, 2014, 11:15:45 PM |
|
I can assure that klintay service is professional and he was trustworthy in my case. I get my package after about 5 working days from HK to Poland. Some photos of this beauty http://imgur.com/a/4BH89#3 I will test it full of most power draw USB miner on market = our Bi•Fury and post some review. Thanks klintay !
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 07, 2014, 09:39:16 AM |
|
I can assure that klintay service is professional and he was trustworthy in my case. I get my package after about 5 working days from HK to Poland. Some photos of this beauty http://imgur.com/a/4BH89#3 I will test it full of most power draw USB miner on market = our Bi•Fury and post some review. Thanks klintay ! Oh man! I can't wait to hear how it goes...Dipo Electronic hub plus 19 bi-fury miners..mmmmmmmmmmmmm
|
|
|
|
Dabs
Legendary
Offline
Activity: 3416
Merit: 1912
The Concierge of Crypto
|
|
February 09, 2014, 02:47:35 PM |
|
I confirm that I have received my hub. Local customs charged me with VAT (Value Added Tax) but the duties for the item was free because it's electronics.
Will post pictures soon. I forgot to upload them last week. I have 2 Blue Furies and 2 Nano Furies and 1 Dual Miner, and they all work separately, but I can't get them to all work all at the same time. I attribute that to a software issue, not hardware though, so this hub is good.
Since I don't have enough miners to test this, I'm going to just try charging a bunch of mobile phones and tablets with it. hehe.
|
|
|
|
jedimstr
|
|
February 13, 2014, 05:26:00 AM |
|
Received mine... Had to replace the power cord with one with a US plug, but it's running well.
I'll take some photos tomorrow... Running a RedFury, Bi*Fury, 3x Drillbit thumbs, and 4x Antminer U1's.
|
|
|
|
razorfishsl
|
|
February 13, 2014, 07:20:44 AM |
|
Received mine... Had to replace the power cord with one with a US plug, but it's running well.
I'll take some photos tomorrow... Running a RedFury, Bi*Fury, 3x Drillbit thumbs, and 4x Antminer U1's.
Great to hear that you are up and running fairly painlessly. But Please ensure the replacement plug is 3 pin. RF
|
|
|
|
jedimstr
|
|
February 13, 2014, 02:42:47 PM |
|
Received mine... Had to replace the power cord with one with a US plug, but it's running well.
I'll take some photos tomorrow... Running a RedFury, Bi*Fury, 3x Drillbit thumbs, and 4x Antminer U1's.
Great to hear that you are up and running fairly painlessly. But Please ensure the replacement plug is 3 pin. RF Yes, it is a three-pin. Standard PSU cord for the US with ground/earth plug. Here's how it looks: And yes, I know about all the warnings on the USB gooseneck fans, but haven't found a good high CFM alternative with a small footprint.
|
|
|
|
razorfishsl
|
|
February 13, 2014, 11:16:05 PM |
|
Excellent!!!! Quite a menagerie of miners you have there…. ;-)
Hmmm… I think I can see a 49 port hub in the corner of the picture?
RF
|
|
|
|
jedimstr
|
|
February 13, 2014, 11:47:15 PM |
|
Excellent!!!! Quite a menagerie of miners you have there…. ;-)
Hmmm… I think I can see a 49 port hub in the corner of the picture?
RF
That's just the tip of the iceberg... So on your USB hub I've got: 3x Drillbit Thumbs 1x Bi*Fury 1x RedFury 4x Antminer U1's connected to my Mac Pro On the ASICMiner 49 Port hub I've got: 44x ASICMiner Block Erupters 3x Antminer U1's Connected to a RaspPi with Minepeon In a Spotswood case: 5x Drillbit 8Boards Connected to a BeagleBoneBlack (Debian) 1x Antminer S1 In another Spotswood Case: 4x MSI TFIII 7950's (Middlecoin Mining) You can see some of them before I rearranged things and got the Antminer S1 here: http://www.youtube.com/watch?v=XJkZFXVxyDoWill have to post an updated video with your hub and the S1 that just arrived
|
|
|
|
razorfishsl
|
|
February 14, 2014, 02:07:55 AM |
|
Hi, What you may consider doing… for a test is throw that 49 board from the Raspberry pi to the OSX for an hour and compare your hash rates.
I found that the hash rates improve when I moved my miners from shitty little cutter single core SBC's, sometimes as much as 400MH/s per miner for the BE's The issue is that on many of these SBC's the Ethernet/network is chained off the same damned USB systems.
The only thing to watch is that for some reason OSX is very fussy about the structure of the USB chain. The devices show up, but the miner software has a hell of a job enumerating the devices. Sometimes failing to remove devices that were removed.
|
|
|
|
jedimstr
|
|
February 14, 2014, 02:30:23 AM |
|
Hi, What you may consider doing… for a test is throw that 49 board from the Raspberry pi to the OSX for an hour and compare your hash rates.
I found that the hash rates improve when I moved my miners from shitty little cutter single core SBC's, sometimes as much as 400MH/s per miner for the BE's The issue is that on many of these SBC's the Ethernet/network is chained off the same damned USB systems.
The only thing to watch is that for some reason OSX is very fussy about the structure of the USB chain. The devices show up, but the miner software has a hell of a job enumerating the devices. Sometimes failing to remove devices that were removed.
Yup, I used to have the 49hub on the Mac. But as you mentioned, the enumeration is a bitch, especially for the Erupters. It made the network systempref hang anytime I brought it up for network settings. Oddly enough, they seem happier on my Raspberry Pi with the latest preview build of Minepeon and BFGMiner and hashrate hasn't really suffered. CGMiner was worse on the Pi. Your hub and the more powerful USB miners (even the ones that share drivers with the Erupters) are much better with my Mac now, which itself is a bit mission critical since I run a p2pool node this all connects to. I even have a dual Link aggregated gig-Ethernet connection between my managed switch and my Mac Pro to maximize connections to my p2pool node so not being able to open the network syspref wasn't ideal.
|
|
|
|
razorfishsl
|
|
February 14, 2014, 02:34:30 AM |
|
Yep the reason it hangs in systempref is that is where the shitty setup for modems is processed and since the BE's enumerate as serial interfaces…… Something messes up and….well you get the picture…
'ZOC' does the same with FTDI USB serial chips sometimes….
RF
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 14, 2014, 04:45:33 AM |
|
Excellent!!!! Quite a menagerie of miners you have there…. ;-)
Hmmm… I think I can see a 49 port hub in the corner of the picture?
RF
That's just the tip of the iceberg... So on your USB hub I've got: 3x Drillbit Thumbs 1x Bi*Fury 1x RedFury 4x Antminer U1's connected to my Mac Pro On the ASICMiner 49 Port hub I've got: 44x ASICMiner Block Erupters 3x Antminer U1's Connected to a RaspPi with Minepeon In a Spotswood case: 5x Drillbit 8Boards Connected to a BeagleBoneBlack (Debian) 1x Antminer S1 In another Spotswood Case: 4x MSI TFIII 7950's (Middlecoin Mining) You can see some of them before I rearranged things and got the Antminer S1 here: http://www.youtube.com/watch?v=XJkZFXVxyDoWill have to post an updated video with your hub and the S1 that just arrived Sweet! I just got in a shipment of Gridseed dualminer Bitcoin/Litecoin usb miners. So going to test them out tonight. Here is a sneak preview first though: I can assure that klintay service is professional and he was trustworthy in my case. I get my package after about 5 working days from HK to Poland. Some photos of this beauty http://imgur.com/a/4BH89#3 I will test it full of most power draw USB miner on market = our Bi•Fury and post some review. Thanks klintay ! Felipeo, any word yet on the results when using the bi-fury usb miners?
|
|
|
|
jedimstr
|
|
February 14, 2014, 05:19:58 AM |
|
Klintay: do you have another thread for selling the DualMiners?
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 15, 2014, 08:39:02 AM |
|
Klintay: do you have another thread for selling the DualMiners?
I am planning on organising a group buy in the near future. At the moment i just ordered these ones for myself as testers. They are hashing away nicely right now.
|
|
|
|
Felipeo
Sr. Member
Offline
Activity: 476
Merit: 262
EOSABC
|
|
February 17, 2014, 04:35:04 PM |
|
Felipeo, any word yet on the results when using the bi-fury usb miners?
Sorry for long time no post but I really have much to do last time And now to the point! Yes this Dipo hub is the most power full production hub I have in my hand! I can confirm Hub easy serve 19 Bi•Fury's with no power drops!For every day I used setup like this: And get result like this(last device is weaker one, its not because lack of power): 16 Bi•Fury's and minepeon. And because Dipo have 3 USB ports on side its quite expandable So basically you can easily made Dipo + 3x Dipo monster with 64+ ports all 5V and 1A, using just 1 USB port in your computer(rPi will not see 2 line) My next setup will be Dipo + 3x ORICO A3H10(because I have couple in hand) That will be 16 + 3x5 = 31 Bi•Fury Thanks again klintay!
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 18, 2014, 07:47:10 AM |
|
16 Bi•Fury's and minepeon. And because Dipo have 3 USB ports on side its quite expandable So basically you can easily made Dipo + 3x Dipo monster with 64+ ports all 5V and 1A, using just 1 USB port in your computer(rPi will not see 2 line) My next setup will be Dipo + 3x ORICO A3H10(because I have couple in hand) That will be 16 + 3x5 = 31 Bi•Fury Thanks again klintay! Oh man! What a sweet picture Thank you for posting that. I am really happy to hear they past the test. That is super news! I think need to get myself some Bi•Fury's soon
|
|
|
|
Felipeo
Sr. Member
Offline
Activity: 476
Merit: 262
EOSABC
|
|
February 18, 2014, 06:22:52 PM |
|
That is no problem just give me a singh I will make your order right priority and process it by my self Cheers!
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 19, 2014, 02:47:11 AM |
|
I have lowered the prices (see first page for details), there is now only 9 left. Get them while stocks last!
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 19, 2014, 02:57:00 AM |
|
8 left
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7884
'The right to privacy matters'
|
|
February 19, 2014, 02:57:23 AM Last edit: February 19, 2014, 03:24:35 AM by philipma1957 |
|
I have lowered the prices (see first page for details), there is now only 9 left. Get them while stocks last!
hold one for me okay set mine to 120 volt usa. 155 40 195 minus btc discount of 6% = 183.30 usd = about .288 btc so I will send in a minute or 2. sent .291 btc https://blockchain.info/tx/fadcb9e611793b9e7359f7f90dc0b1cdd10aff40484ddd7fe18e0e3f081b6a72from 1Fo2K52Rz7LZw9fcF5BDdDBjfNaViQ8J3x also sent a pm. so 120 volt usa setting and I will be looking forward to using it. thanks philipma1957
|
|
|
|
BotwinBG
|
|
February 19, 2014, 03:38:29 AM |
|
Hold two for me please!
|
| AMEPAY | | | | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ | │▌ | AMEPAY IEO
▄██████▄ ▀██████▄ █████████ ▀█████ ███████▀ ▀███ ██████▀ ▄█▄ ▀██ ██████▄ ▀█▀ ▄██ ███████▄ ▄███ █████████ ▄█████ ▀██████▀ ▄██████▀ | |
| │ | | AMEPAY LISTING
▐███▄ ████▌ ▐██████████▄ █████████████ ████▌ █████ ▐████ ▄████ ██████████▀ ▀█████▀▀ | |
| ▐│ | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ |
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 19, 2014, 04:30:52 AM |
|
I have lowered the prices (see first page for details), there is now only 9 left. Get them while stocks last!
hold one for me okay set mine to 120 volt usa. 155 40 195 minus btc discount of 6% = 183.30 usd = about .288 btc so I will send in a minute or 2. sent .291 btc https://blockchain.info/tx/fadcb9e611793b9e7359f7f90dc0b1cdd10aff40484ddd7fe18e0e3f081b6a72from 1Fo2K52Rz7LZw9fcF5BDdDBjfNaViQ8J3x also sent a pm. so 120 volt usa setting and I will be looking forward to using it. thanks philipma1957 received. Will package it tonight and send it tomorrow. Hold two for me please!
reserved 6 left!
|
|
|
|
madao
|
|
February 19, 2014, 04:45:19 AM Last edit: February 19, 2014, 05:09:25 AM by madao |
|
Remaining 6 for me, plox! Currently adding up sums to transfer BTC EDIT: Paid! PM sent Second edit: oh wait, there was an additional 6% discount on top of the price difference between BTC and Paypal? Well, feel free to refund me 6% if you want
|
1PgVAFtdNoKeFDmCc6Vq2jd72au8qjj8wE
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 19, 2014, 05:18:06 AM Last edit: February 19, 2014, 10:28:35 AM by klintay |
|
Remaining 6 for me, plox! Currently adding up sums to transfer BTC EDIT: Paid! PM sent Second edit: oh wait, there was an additional 6% discount on top of the price difference between BTC and Paypal? Well, feel free to refund me 6% if you want received will refund the 6% later as not near my wallet at the moment. Thanks everyone will PM tracking info tomorrow EDIT: BotwinBG, is going with Madeo's Norwegian group buy so there are 2 left in stock! first come, first serve basis!
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 20, 2014, 08:28:01 AM |
|
Here is the update for the last three orders:
Madeo - 6 units - shipped (tracking provided) philipma1957 - 1 unit - shipped (tracking provided) XERIUS - 1 unit - shipped (tracking provided)
|
|
|
|
Dabs
Legendary
Offline
Activity: 3416
Merit: 1912
The Concierge of Crypto
|
|
February 20, 2014, 08:51:01 AM |
|
Sorry for the late post. Here are my pictures: USB Hub with ice fury and blue fury USB Hub with Dabs USB Hub top view
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 20, 2014, 08:54:44 AM |
|
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 21, 2014, 06:33:50 AM |
|
SOLD OUT! Seems like everyone is happy with their hubs I have left trust feedback for buyers, if i have forgotten anyone then PM me.
|
|
|
|
madao
|
|
February 21, 2014, 06:44:16 AM |
|
If there was any doubt, I got the refund, klintay is a straight shooter, me thinks Looking forward to the hubs! Thank you!
|
1PgVAFtdNoKeFDmCc6Vq2jd72au8qjj8wE
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7884
'The right to privacy matters'
|
|
February 21, 2014, 05:09:29 PM |
|
Here is the update for the last three orders:
Madeo - 6 units - shipped (tracking provided) philipma1957 - 1 unit - shipped (tracking provided) XERIUS - 1 unit - shipped (tracking provided)
the tracking number that you PM'd to me is for a package to Norway. While Norway is a fine country and the birthplace of my grandmother. I live in Howell, NJ USA so I am hoping that you gave me Madeo's number as I think he is from Norway IIRC. So can you please pm a number to me. Thanks
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 22, 2014, 01:11:00 AM |
|
Here is the update for the last three orders:
Madeo - 6 units - shipped (tracking provided) philipma1957 - 1 unit - shipped (tracking provided) XERIUS - 1 unit - shipped (tracking provided)
the tracking number that you PM'd to me is for a package to Norway. While Norway is a fine country and the birthplace of my grandmother. I live in Howell, NJ USA so I am hoping that you gave me Madeo's number as I think he is from Norway IIRC. So can you please pm a number to me. Thanks yep my mistake will send you the correct tracking number shortly
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7884
'The right to privacy matters'
|
|
February 22, 2014, 05:09:01 AM Last edit: February 22, 2014, 01:45:07 PM by philipma1957 |
|
Here is the update for the last three orders:
Madeo - 6 units - shipped (tracking provided) philipma1957 - 1 unit - shipped (tracking provided) XERIUS - 1 unit - shipped (tracking provided)
the tracking number that you PM'd to me is for a package to Norway. While Norway is a fine country and the birthplace of my grandmother. I live in Howell, NJ USA so I am hoping that you gave me Madeo's number as I think he is from Norway IIRC. So can you please pm a number to me. Thanks yep my mistake will send you the correct tracking number shortly Thanks looking forward to this.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7884
'The right to privacy matters'
|
|
February 22, 2014, 01:45:42 PM |
|
Here is the update for the last three orders:
Madeo - 6 units - shipped (tracking provided) philipma1957 - 1 unit - shipped (tracking provided) XERIUS - 1 unit - shipped (tracking provided)
the tracking number that you PM'd to me is for a package to Norway. While Norway is a fine country and the birthplace of my grandmother. I live in Howell, NJ USA so I am hoping that you gave me Madeo's number as I think he is from Norway IIRC. So can you please pm a number to me. Thanks yep my mistake will send you the correct tracking number shortly Thanks looking forward to this. Still waiting for tracking.
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 22, 2014, 04:36:01 PM |
|
Here is the update for the last three orders:
Madeo - 6 units - shipped (tracking provided) philipma1957 - 1 unit - shipped (tracking provided) XERIUS - 1 unit - shipped (tracking provided)
the tracking number that you PM'd to me is for a package to Norway. While Norway is a fine country and the birthplace of my grandmother. I live in Howell, NJ USA so I am hoping that you gave me Madeo's number as I think he is from Norway IIRC. So can you please pm a number to me. Thanks yep my mistake will send you the correct tracking number shortly Thanks looking forward to this. Still waiting for tracking. Sent PM, sorry again for the delay. the package has left HK and is now in transit.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7884
'The right to privacy matters'
|
|
February 23, 2014, 11:18:35 PM |
|
Here is the update for the last three orders:
Madeo - 6 units - shipped (tracking provided) philipma1957 - 1 unit - shipped (tracking provided) XERIUS - 1 unit - shipped (tracking provided)
the tracking number that you PM'd to me is for a package to Norway. While Norway is a fine country and the birthplace of my grandmother. I live in Howell, NJ USA so I am hoping that you gave me Madeo's number as I think he is from Norway IIRC. So can you please pm a number to me. Thanks yep my mistake will send you the correct tracking number shortly Thanks looking forward to this. Still waiting for tracking. Sent PM, sorry again for the delay. the package has left HK and is now in transit. yes and the item has cleared customs so maybe I get it on tues.
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
February 24, 2014, 12:42:43 AM |
|
yes and the item has cleared customs so maybe I get it on tues.
nice that was pretty fast
|
|
|
|
madao
|
|
February 28, 2014, 06:53:57 PM |
|
Got my 6 hubs today Thank you!
|
1PgVAFtdNoKeFDmCc6Vq2jd72au8qjj8wE
|
|
|
madao
|
|
February 28, 2014, 06:59:16 PM |
|
the tracking number that you PM'd to me is for a package to Norway.
While Norway is a fine country and the birthplace of my grandmother.
I live in Howell, NJ USA so I am hoping that you gave me Madeo's number as I think he is from Norway IIRC.
Just noticed this today... Thank you for the kind words in regard to my home country to which you can trace lineage Hope you get your hub soon!
|
1PgVAFtdNoKeFDmCc6Vq2jd72au8qjj8wE
|
|
|
Zeta0S
Legendary
Offline
Activity: 1890
Merit: 1031
|
|
March 03, 2014, 04:04:17 AM |
|
|
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
April 04, 2014, 07:17:31 PM |
|
Good day,
I would be interested in the HUB, what would be the BTC price including shipping to Austria?
If the hub sent as a gift, because of the customs? HUB is 100% compatible with RaspberryPi?
They have a photo of the back, for a possible wall mounting?
regards
There is a 6% discount for btc orders. The price including shipping to Austria is $210 usd/ 0.259btc (according to current coinbase btc price) with the 6% discount that is 0.244btc in total. They are compatible with RaspberryPi and just send me a message once you make payment with your delivery details/special customs requests etc. Not too sure about the back mountings but will upload pics shortly for you to see for yourself. Good day, USB HUB will be available again?
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
April 04, 2014, 07:43:31 PM |
|
Good day,
I would be interested in the HUB, what would be the BTC price including shipping to Austria?
If the hub sent as a gift, because of the customs? HUB is 100% compatible with RaspberryPi?
They have a photo of the back, for a possible wall mounting?
regards
There is a 6% discount for btc orders. The price including shipping to Austria is $210 usd/ 0.259btc (according to current coinbase btc price) with the 6% discount that is 0.244btc in total. They are compatible with RaspberryPi and just send me a message once you make payment with your delivery details/special customs requests etc. Not too sure about the back mountings but will upload pics shortly for you to see for yourself. Good day, USB HUB will be available again? very soon. Will keep you posted. In the mean time we have 49 port hub available right now with immediate shipping: https://bitcointalk.org/index.php?topic=528371
|
|
|
|
Zeta0S
Legendary
Offline
Activity: 1890
Merit: 1031
|
|
April 07, 2014, 06:28:56 AM |
|
Good day,
I would be interested in the HUB, what would be the BTC price including shipping to Austria?
If the hub sent as a gift, because of the customs? HUB is 100% compatible with RaspberryPi?
They have a photo of the back, for a possible wall mounting?
regards
There is a 6% discount for btc orders. The price including shipping to Austria is $210 usd/ 0.259btc (according to current coinbase btc price) with the 6% discount that is 0.244btc in total. They are compatible with RaspberryPi and just send me a message once you make payment with your delivery details/special customs requests etc. Not too sure about the back mountings but will upload pics shortly for you to see for yourself. Good day, USB HUB will be available again? Here they are: https://www.youtube.com/watch?v=tiz_8inQpbk
|
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
April 27, 2014, 04:56:31 PM Last edit: May 01, 2014, 04:24:07 AM by klintay |
|
We have the 19 port hub in-stock again! Same great quality and price! Immediate shipping!! Bitcoin 1-2 hub - $140 usd 3-5 hubs - $135 usd each 6+ hubs - $130 usd each Bitcoin Payment Address: 16NqeYCSwU8fx7FhEpQiuYGaQJgssDuuwS Paypal 1-2 hub - $145 usd 3-5 hubs - $140 usd each 6+ hubs - $135 usd each There are two shipping methods: 1. Registered Airmail: $40 usd (5-8 days shipping) 2. Speed post: $70 usd (2-5 days shipping) Please follow the details on the thread for details about payment. For btc please use the coinbase usd/btc exchange rate at time of payment. I also have power cables for US/UK/EU
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7884
'The right to privacy matters'
|
|
April 27, 2014, 07:03:42 PM |
|
I May want this have to wait until late in the week to order.
thanks for the pm
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
April 28, 2014, 08:31:04 AM |
|
I May want this have to wait until late in the week to order.
thanks for the pm
No problem, I will reserve a unit for you. Just updated the price again
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
May 05, 2014, 02:04:25 PM |
|
Good day,
I would be interested in the HUB, what would be the BTC price including shipping to Austria?
If the hub sent as a gift, because of the customs? HUB is 100% compatible with RaspberryPi?
They have a photo of the back, for a possible wall mounting?
regards
There is a 6% discount for btc orders. The price including shipping to Austria is $210 usd/ 0.259btc (according to current coinbase btc price) with the 6% discount that is 0.244btc in total. They are compatible with RaspberryPi and just send me a message once you make payment with your delivery details/special customs requests etc. Not too sure about the back mountings but will upload pics shortly for you to see for yourself. Good day, USB HUB will be available again? It is available now
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 05, 2014, 02:19:34 PM |
|
Hello klintay!
I have send you the BTC!
You have PM with transaction ID and my address!
You will send it as gift for the "duty"?
regards
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 05, 2014, 05:26:47 PM |
|
I hope you have received my payment!? And the HUB runs with 14 Bitfury Twin and 5 Antminer U2+ stable?
greets
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
May 06, 2014, 05:19:33 AM |
|
I hope you have received my payment!? And the HUB runs with 14 Bitfury Twin and 5 Antminer U2+ stable?
greets
payment and order info was received today. It is a public holiday today but will get your item sent out ASAP tomorrow morning. It can happily support the 18 twin chip miners Will update tracking info shortly.
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 13, 2014, 05:42:17 PM |
|
Hello, the package is already in Austria: shipment history status postcode date/time country Optionen Item accepted abroad 07.05.2014 11:14:00 HK Item forwarded abroad HKHKGA 08.05.2014 17:13:00 HK Item arrived in Austria 1005 13.05.2014 09:20:36 AT Item handed over to customs 1005 13.05.2014 09:20:37 AT I hope for a fast-sustaining It's possible to give me the outside dimensions of HUBs? I already can make me a wall mount in advance, where I can set it on? regards
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 14, 2014, 06:22:12 AM |
|
@klintay I have a problem with the HUB by the costums? Item accepted abroad 07.05.2014 11:14:00 HK Item forwarded abroad HKHKGA 08.05.2014 17:13:00 HK Item arrived in Austria 1005 13.05.2014 09:20:36 AT Item handed over to customs 1005 13.05.2014 09:20:37 AT Customs documents/invoice missing 1005 14.05.2014 08:07:37 ?? regards
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
May 14, 2014, 07:09:00 AM |
|
@klintay I have a problem with the HUB by the costums? Item accepted abroad 07.05.2014 11:14:00 HK Item forwarded abroad HKHKGA 08.05.2014 17:13:00 HK Item arrived in Austria 1005 13.05.2014 09:20:36 AT Item handed over to customs 1005 13.05.2014 09:20:37 AT Customs documents/invoice missing 1005 14.05.2014 08:07:37 ?? regards That is strange. The invoice is in a plastic sleeve on the side off the box. I have sent you a personal message with download links for the certificate of postage and the invoice. Please contact the post office and tell them that it has been lost in transit and you have a copy to give them. If you have anymore problems then let me know. The dimensions of the hub are: 21cm x 12cm x 6cm The weight is about 2.2 kg
|
|
|
|
bronan
|
|
May 14, 2014, 01:46:47 PM |
|
Klintay
My order txid: 395b73a8dad9327708d8745198fd08e8d743bbde20f035a3aed48a754c62f7e8
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
May 15, 2014, 12:41:24 AM |
|
Klintay
My order txid: 395b73a8dad9327708d8745198fd08e8d743bbde20f035a3aed48a754c62f7e8
Item was sent today. Just sent you a PM with tracking number.
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 20, 2014, 05:26:45 AM |
|
@klintay I have received the HUB yesterday, unfortunately I had to pay extra for 30 € customs fee ... So the HUB run with 8 BiFury Miners and 10 Antminer U2+, I hope he is strong enough for the load!? I load pictures tonight regards
|
|
|
|
Zeta0S
Legendary
Offline
Activity: 1890
Merit: 1031
|
|
May 20, 2014, 04:26:48 PM |
|
@klintay I have received the HUB yesterday, unfortunately I had to pay extra for 30 € customs fee ... So the HUB run with 8 BiFury Miners and 10 Antminer U2+, I hope he is strong enough for the load!? I load pictures tonight regards You get the 19 port or the 49 port hub?
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 20, 2014, 05:06:21 PM |
|
Hello I get the 19port HUB!
greets
|
|
|
|
Zeta0S
Legendary
Offline
Activity: 1890
Merit: 1031
|
|
May 20, 2014, 07:05:04 PM |
|
Hello I get the 19port HUB!
greets
That will easy run your miners.
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 20, 2014, 07:21:55 PM |
|
OK thanks, at time I have no problem, but when also hang my Raspberry on the HUB then i have a problem with port 14!? Good day, I have a problem with one BFx2 Miner, one miner always lose the "red light" at one USB Port "14" and run very slow, is this a problem fro the USB port or to less power from the port? The miner runs but without the "Vcore" light!??? cgminer version 4.3.3 - Started: [2014-05-20 18:55:35] -------------------------------------------------------------------------------- (5s):45.00G (1m):40.35G (5m):17.29G (15m):6.745G (avg):42.54Gh/s A:1408 R:0 HW:37 WU:554.7/m Connected to mint.bitminter.com diff 32 with stratum as user Block: 938f03c7... Diff:8.85G Started: [18:55:35] Best share: 5.95K -------------------------------------------------------------------------------- [USB management [Pool management [Settings [Display options [Q]uit 0: ANU 0 : | 1.895G / 1.950Gh/s WU:21.7/m 1: ANU 1 : | 1.984G / 1.951Gh/s WU:22.1/m 2: ANU 2 : | 1.982G / 1.954Gh/s WU:17.9/m 3: ANU 3 : | 1.978G / 1.972Gh/s WU:21.7/m 4: BXM 0 : | 3.227G / 3.129Gh/s WU:46.9/m 5: BXM 1 : | 3.984G / 3.158Gh/s WU:54.6/m 6: BXM 2 : | 3.528G / 3.393Gh/s WU:48.4/m 7: BXM 3 : | 2.676G / 2.506Gh/s WU:36.2/m 8: BXM 4 : | 2.559G / 2.323Gh/s WU:34.3/m 9: BXM 5 : | 4.560G / 4.221Gh/s WU:62.6/m 10: BXM 6 : | 2.817G / 3.362Gh/s WU:47.3/m [b]11: BXM 7 : | 1.736G / 1.635Gh/s WU:23.7/m[/b] 12: ANU 4 : | 1.988G / 1.970Gh/s WU:21.7/m 13: ANU 5 : | 1.956G / 1.920Gh/s WU:17.7/m 14: ANU 6 : | 1.983G / 1.946Gh/s WU:17.7/m 15: ANU 7 : | 1.892G / 1.937Gh/s WU:21.7/m 16: ANU 8 : | 1.986G / 1.955Gh/s WU:24.2/m 17: ANU 9 : | 1.988G / 1.977Gh/s WU:22.2/m -------------------------------------------------------------------------------- regards So i don't know...
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 20, 2014, 08:09:19 PM |
|
So my pictures of the HUB with the miners: regards
|
|
|
|
razorfishsl
|
|
May 21, 2014, 01:48:42 AM |
|
OK thanks, at time I have no problem, but when also hang my Raspberry on the HUB then i have a problem with port 14!? Good day, I have a problem with one BFx2 Miner, one miner always lose the "red light" at one USB Port "14" and run very slow, is this a problem fro the USB port or to less power from the port? The miner runs but without the "Vcore" light!??? cgminer version 4.3.3 - Started: [2014-05-20 18:55:35] -------------------------------------------------------------------------------- (5s):45.00G (1m):40.35G (5m):17.29G (15m):6.745G (avg):42.54Gh/s A:1408 R:0 HW:37 WU:554.7/m Connected to mint.bitminter.com diff 32 with stratum as user Block: 938f03c7... Diff:8.85G Started: [18:55:35] Best share: 5.95K -------------------------------------------------------------------------------- [USB management [Pool management [Settings [Display options [Q]uit 0: ANU 0 : | 1.895G / 1.950Gh/s WU:21.7/m 1: ANU 1 : | 1.984G / 1.951Gh/s WU:22.1/m 2: ANU 2 : | 1.982G / 1.954Gh/s WU:17.9/m 3: ANU 3 : | 1.978G / 1.972Gh/s WU:21.7/m 4: BXM 0 : | 3.227G / 3.129Gh/s WU:46.9/m 5: BXM 1 : | 3.984G / 3.158Gh/s WU:54.6/m 6: BXM 2 : | 3.528G / 3.393Gh/s WU:48.4/m 7: BXM 3 : | 2.676G / 2.506Gh/s WU:36.2/m 8: BXM 4 : | 2.559G / 2.323Gh/s WU:34.3/m 9: BXM 5 : | 4.560G / 4.221Gh/s WU:62.6/m 10: BXM 6 : | 2.817G / 3.362Gh/s WU:47.3/m [b]11: BXM 7 : | 1.736G / 1.635Gh/s WU:23.7/m[/b] 12: ANU 4 : | 1.988G / 1.970Gh/s WU:21.7/m 13: ANU 5 : | 1.956G / 1.920Gh/s WU:17.7/m 14: ANU 6 : | 1.983G / 1.946Gh/s WU:17.7/m 15: ANU 7 : | 1.892G / 1.937Gh/s WU:21.7/m 16: ANU 8 : | 1.986G / 1.955Gh/s WU:24.2/m 17: ANU 9 : | 1.988G / 1.977Gh/s WU:22.2/m -------------------------------------------------------------------------------- regards So i don't know... Try this: Swap your PI cable from port 19 with the miner on port 14, that will take your USB chain to the miner down 1 level, it will also highlight if it is a socket problem on 14 RF
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
May 21, 2014, 04:29:24 AM Last edit: May 21, 2014, 05:06:19 AM by klintay |
|
@klintay I have received the HUB yesterday, unfortunately I had to pay extra for 30 € customs fee ... So the HUB run with 8 BiFury Miners and 10 Antminer U2+, I hope he is strong enough for the load!? I load pictures tonight regards Should be no problem. This hub can support all those miners, even if it is fully loaded. I have sixteen twin chip miners running nice (average speed is 3.8 gh/s per miner, without overclock) OK thanks,
at time I have no problem, but when also hang my Raspberry on the HUB then i have a problem with port 14!?
Try plugging the miner into another port on the hub and even directly into a computer by itself. If the voltage light is still turning off then it could be a defective miner and hence it needs replacing. Who did you buy BFx2 from? Maybe they can replace if it is not working as it should. Also is the raspberry pi always hanging? So my pictures of the HUB with the miners: regards Nice setup by the way
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 21, 2014, 05:43:18 AM |
|
Good day, i switch the Bx2 miner amog themselve, but only at port 14 has problems!? At time it runs good, the Pi have an extra power supply On evening i will test it again... Yes an the raspberry pi is always on to monitor my photovoltaic plant. greets
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
May 21, 2014, 06:56:55 AM |
|
Good day, i switch the Bx2 miner amog themselve, but only at port 14 has problems!? At time it runs good, the Pi have an extra power supply On evening i will test it again... Yes an the raspberry pi is always on to monitor my photovoltaic plant. greets Ok, post what you find out. I hope it works. This sounds silly but change miners around so that antminer is in port 14 instead.
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
May 26, 2014, 08:42:16 AM |
|
Hello, at time all run good on port 14 (But two BFx2 miner run slower and I'dont know), so i have order a xtar USB detector a will test each port and will report you regards
|
|
|
|
razorfishsl
|
|
May 27, 2014, 02:27:42 AM Last edit: May 27, 2014, 07:54:18 AM by razorfishsl |
|
Hello, at time all run good on port 14 (But two BFx2 miner run slower and I'dont know), so i have order a xtar USB detector a will test each port and will report you regards Luckily it's only $5us There is an 'inherent flaw' in such devices, some require to feed the target device via a low value resistor and then compute the voltage drop across the resistor. ( in doing so they drop the voltage but also have to pass ALL the current from the measured device thru the measuring resistor…) So don't take the results it gives too seriously , it unlikely to report the details correctly & it may stand a good chance of slowing the miner down a little (due to current limitation)( But it may reduce the number of HW errors you get!!!!) Also do not leave it plugged into the port permanently as it is likely to overheat & distort the plastic case. There are better units available that do not use such limited ways to measure the current. RF
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
May 28, 2014, 08:30:03 AM |
|
Hello, at time all run good on port 14 (But two BFx2 miner run slower and I'dont know), so i have order a xtar USB detector a will test each port and will report you regards nice little gadget! I am going to buy one now too
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
June 02, 2014, 03:58:07 PM |
|
Hello guys, so I have test a little bit he HUB, and I think it’s a good quality Only the voltage is on the lower end of the USB standard. My Devices: 10 x Antminer U2+ (~ 1,8 GH/s / anu-freq:225), 8 x Bfx2 (~ 3,5 GH/s / bxm-bits:53) Here my table: USB port | Device | Voltage | amperage | 1 | Bfx2 | 4,45 | 1,01 | 2 | Antminer | 4,55 | 0,61 | 3 | Bfx2 | 4,40 | 1,05 | 4 | Antminer | 4,50 | 0,62 | 5 | Antminer | 4,60 | 0,64 | 6 | Bfx2 | 4,40 | 1,05 | 7 | Antminer | 4,60 | 0,64 | 8 | Bfx2 | 4,45 | 1,02 | 9 | Bfx2 | 4,45 | 1,07 | 10 | Antminer | 4,60 | 0,61 | 11 | Bfx2 | 4,45 | 1,01 | 12 | Antminer | 4,55 | 0,61 | 13 | Antminer | 4,65 | 0,59 | 14 | Bfx2 | 4,45 | 1,07 | 15 | Antminer | 4,65 | 0,58 | 16 | Bfx2 | 4,61 | 1,01 | 17 | Antminer | 4,55 | 0,61 | 18 | Antminer | 4,50 | 0,61 | 19 | Empty for Pi later | |
So when the voltage is OK, I can say a good result about the measurement. I hope for the permanent load about 16 A is for the HUB no problem? At time my results from the Cgminer, one Bfx2 is a little bit slower... 0: ANU 0: | 1.770G/1.749Gh/s | A: 624 R: 0 HW:56 WU: 19.4/m 1: ANU 1: | 1.745G/1.758Gh/s | A: 336 R: 0 HW:39 WU: 18.1/m 2: ANU 2: | 1.756G/1.749Gh/s | A: 368 R: 0 HW:56 WU: 17.5/m 3: ANU 3: | 1.785G/1.752Gh/s | A: 416 R: 0 HW:42 WU: 18.6/m 4: ANU 4: | 1.787G/1.756Gh/s | A: 528 R: 0 HW:49 WU: 19.0/m 5: ANU 5: | 1.785G/1.760Gh/s | A: 336 R: 0 HW:35 WU: 17.8/m 6: ANU 6: | 1.756G/1.749Gh/s | A: 464 R: 0 HW:51 WU: 19.0/m 7: ANU 7: | 1.671G/1.744Gh/s | A: 592 R: 0 HW:58 WU: 18.5/m 8: BXM 0: | 3.640G/3.451Gh/s | A:1024 R:16 HW: 0 WU: 50.8/m 9: BXM 1: | 2.759G/2.733Gh/s | A: 880 R:32 HW: 0 WU: 39.1/m 10: BXM 2: | 3.672G/3.689Gh/s | A:1152 R:32 HW: 0 WU: 52.1/m 11: BXM 3: | 3.514G/3.389Gh/s | A: 912 R:32 HW: 0 WU: 49.6/m 12: BXM 4: | 3.464G/3.326Gh/s | A:1232 R: 0 HW: 0 WU: 48.9/m 13: BXM 5: | 3.838G/3.825Gh/s | A:1456 R: 0 HW: 0 WU: 54.2/m 14: BXM 6: | 3.696G/3.786Gh/s | A:1424 R: 0 HW: 0 WU: 52.9/m 15: BXM 7: | 3.298G/3.604Gh/s | A:1088 R:64 HW: 0 WU: 50.6/m 16: ANU 8: | 1.770G/1.755Gh/s | A: 352 R: 0 HW:54 WU: 17.9/m 17: ANU 9: | 1.535G/1.751Gh/s | A: 400 R: 0 HW:46 WU: 17.4/m regards
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
June 02, 2014, 04:06:05 PM |
|
Hello guys, so I have test a little bit he HUB, and I think it’s a good quality Only the voltage is on the lower end of the USB standard. My Devices: 10 x Antminer U2+ (~ 1,8 GH/s / anu-freq:225), 8 x Bfx2 (~ 3,5 GH/s / bxm-bits:53) Here my table: USB port | Device | Voltage | amperage | 1 | Bfx2 | 4,45 | 1,01 | 2 | Antminer | 4,55 | 0,61 | 3 | Bfx2 | 4,40 | 1,05 | 4 | Antminer | 4,50 | 0,62 | 5 | Antminer | 4,60 | 0,64 | 6 | Bfx2 | 4,40 | 1,05 | 7 | Antminer | 4,60 | 0,64 | 8 | Bfx2 | 4,45 | 1,02 | 9 | Bfx2 | 4,45 | 1,07 | 10 | Antminer | 4,60 | 0,61 | 11 | Bfx2 | 4,45 | 1,01 | 12 | Antminer | 4,55 | 0,61 | 13 | Antminer | 4,65 | 0,59 | 14 | Bfx2 | 4,45 | 1,07 | 15 | Antminer | 4,65 | 0,58 | 16 | Bfx2 | 4,61 | 1,01 | 17 | Antminer | 4,55 | 0,61 | 18 | Antminer | 4,50 | 0,61 | 19 | Empty for Pi later | |
So when the voltage is OK, I can say a good result about the measurement. I hope for the permanent load about 16 A is for the HUB no problem? At time my results from the Cgminer, one Bfx2 is a little bit slower... 0: ANU 0: | 1.770G/1.749Gh/s | A: 624 R: 0 HW:56 WU: 19.4/m 1: ANU 1: | 1.745G/1.758Gh/s | A: 336 R: 0 HW:39 WU: 18.1/m 2: ANU 2: | 1.756G/1.749Gh/s | A: 368 R: 0 HW:56 WU: 17.5/m 3: ANU 3: | 1.785G/1.752Gh/s | A: 416 R: 0 HW:42 WU: 18.6/m 4: ANU 4: | 1.787G/1.756Gh/s | A: 528 R: 0 HW:49 WU: 19.0/m 5: ANU 5: | 1.785G/1.760Gh/s | A: 336 R: 0 HW:35 WU: 17.8/m 6: ANU 6: | 1.756G/1.749Gh/s | A: 464 R: 0 HW:51 WU: 19.0/m 7: ANU 7: | 1.671G/1.744Gh/s | A: 592 R: 0 HW:58 WU: 18.5/m 8: BXM 0: | 3.640G/3.451Gh/s | A:1024 R:16 HW: 0 WU: 50.8/m 9: BXM 1: | 2.759G/2.733Gh/s | A: 880 R:32 HW: 0 WU: 39.1/m 10: BXM 2: | 3.672G/3.689Gh/s | A:1152 R:32 HW: 0 WU: 52.1/m 11: BXM 3: | 3.514G/3.389Gh/s | A: 912 R:32 HW: 0 WU: 49.6/m 12: BXM 4: | 3.464G/3.326Gh/s | A:1232 R: 0 HW: 0 WU: 48.9/m 13: BXM 5: | 3.838G/3.825Gh/s | A:1456 R: 0 HW: 0 WU: 54.2/m 14: BXM 6: | 3.696G/3.786Gh/s | A:1424 R: 0 HW: 0 WU: 52.9/m 15: BXM 7: | 3.298G/3.604Gh/s | A:1088 R:64 HW: 0 WU: 50.6/m 16: ANU 8: | 1.770G/1.755Gh/s | A: 352 R: 0 HW:54 WU: 17.9/m 17: ANU 9: | 1.535G/1.751Gh/s | A: 400 R: 0 HW:46 WU: 17.4/m regards Nice results! The 16A load should be no problem. I have mine filled with 16 x Twin Chips and it has been running fine for weeks now
|
|
|
|
razorfishsl
|
|
June 02, 2014, 09:58:07 PM |
|
Hello guys, so I have test a little bit he HUB, and I think it’s a good quality Only the voltage is on the lower end of the USB standard. My Devices: 10 x Antminer U2+ (~ 1,8 GH/s / anu-freq:225), 8 x Bfx2 (~ 3,5 GH/s / bxm-bits:53) Here my table: USB port | Device | Voltage | amperage | 1 | Bfx2 | 4,45 | 1,01 | 2 | Antminer | 4,55 | 0,61 | 3 | Bfx2 | 4,40 | 1,05 | 4 | Antminer | 4,50 | 0,62 | 5 | Antminer | 4,60 | 0,64 | 6 | Bfx2 | 4,40 | 1,05 | 7 | Antminer | 4,60 | 0,64 | 8 | Bfx2 | 4,45 | 1,02 | 9 | Bfx2 | 4,45 | 1,07 | 10 | Antminer | 4,60 | 0,61 | 11 | Bfx2 | 4,45 | 1,01 | 12 | Antminer | 4,55 | 0,61 | 13 | Antminer | 4,65 | 0,59 | 14 | Bfx2 | 4,45 | 1,07 | 15 | Antminer | 4,65 | 0,58 | 16 | Bfx2 | 4,61 | 1,01 | 17 | Antminer | 4,55 | 0,61 | 18 | Antminer | 4,50 | 0,61 | 19 | Empty for Pi later | |
So when the voltage is OK, I can say a good result about the measurement. I hope for the permanent load about 16 A is for the HUB no problem? At time my results from the Cgminer, one Bfx2 is a little bit slower... 0: ANU 0: | 1.770G/1.749Gh/s | A: 624 R: 0 HW:56 WU: 19.4/m 1: ANU 1: | 1.745G/1.758Gh/s | A: 336 R: 0 HW:39 WU: 18.1/m 2: ANU 2: | 1.756G/1.749Gh/s | A: 368 R: 0 HW:56 WU: 17.5/m 3: ANU 3: | 1.785G/1.752Gh/s | A: 416 R: 0 HW:42 WU: 18.6/m 4: ANU 4: | 1.787G/1.756Gh/s | A: 528 R: 0 HW:49 WU: 19.0/m 5: ANU 5: | 1.785G/1.760Gh/s | A: 336 R: 0 HW:35 WU: 17.8/m 6: ANU 6: | 1.756G/1.749Gh/s | A: 464 R: 0 HW:51 WU: 19.0/m 7: ANU 7: | 1.671G/1.744Gh/s | A: 592 R: 0 HW:58 WU: 18.5/m 8: BXM 0: | 3.640G/3.451Gh/s | A:1024 R:16 HW: 0 WU: 50.8/m 9: BXM 1: | 2.759G/2.733Gh/s | A: 880 R:32 HW: 0 WU: 39.1/m 10: BXM 2: | 3.672G/3.689Gh/s | A:1152 R:32 HW: 0 WU: 52.1/m 11: BXM 3: | 3.514G/3.389Gh/s | A: 912 R:32 HW: 0 WU: 49.6/m 12: BXM 4: | 3.464G/3.326Gh/s | A:1232 R: 0 HW: 0 WU: 48.9/m 13: BXM 5: | 3.838G/3.825Gh/s | A:1456 R: 0 HW: 0 WU: 54.2/m 14: BXM 6: | 3.696G/3.786Gh/s | A:1424 R: 0 HW: 0 WU: 52.9/m 15: BXM 7: | 3.298G/3.604Gh/s | A:1088 R:64 HW: 0 WU: 50.6/m 16: ANU 8: | 1.770G/1.755Gh/s | A: 352 R: 0 HW:54 WU: 17.9/m 17: ANU 9: | 1.535G/1.751Gh/s | A: 400 R: 0 HW:46 WU: 17.4/m regards Those readings are Incorrect…. there is no way they should be down at 4.5v RF
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
June 03, 2014, 09:33:35 AM |
|
Hello, i know it's a cheap comparative and no measurement, but on a other Power Supply ( Solo 1,5A@5V) is the measurement with the USB about 4,95V. It should also be noted tolerances: For my purposes, it was sufficient that I've seen that it can not be due to the current strength. When comparing the one should also note that the ~ 4.5V were measured at load in idle it was at ~ 4.85 V. regards
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
June 03, 2014, 05:12:10 PM |
|
Hello, i know it's a cheap comparative and no measurement, but on a other Power Supply ( Solo 1,5A@5V) is the measurement with the USB about 4,95V. It should also be noted tolerances: For my purposes, it was sufficient that I've seen that it can not be due to the current strength. When comparing the one should also note that the ~ 4.5V were measured at load in idle it was at ~ 4.85 V. regards seems to be an issue of accuracy with the device...still a useful tool
|
|
|
|
Zeta0S
Legendary
Offline
Activity: 1890
Merit: 1031
|
|
June 18, 2014, 12:26:04 AM |
|
I have made a nice unboxing of the Eyeboot.com usb hub. Reading all the reports abot the voltage, my Chinese voltmeter says 5.023 volts on usb port 1. Maybe inside you can easy lower of increase the voltage? Bit off topic, the usb hub really turbo charging my mobile phone My Unboxing video, please thumbs up :-)http://youtu.be/oPESQzCq8L0
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
July 07, 2014, 01:19:19 PM |
|
Hello video looks nice and I have not taken any further measurements up now! greet
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
December 07, 2014, 04:01:41 PM |
|
$99 usd SALE on all orders~!!
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
January 06, 2015, 02:25:24 AM |
|
I have made a nice unboxing of the Eyeboot.com usb hub. Reading all the reports abot the voltage, my Chinese voltmeter says 5.023 volts on usb port 1. Maybe inside you can easy lower of increase the voltage? Bit off topic, the usb hub really turbo charging my mobile phone My Unboxing video, please thumbs up :-)http://youtu.be/oPESQzCq8L0Nice video, I am clearing stock now so $85 usd (btc) per hub or $90 usd if you pay by paypal. PM or post in this thread to make an order.
|
|
|
|
josepi09
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 12, 2015, 07:40:10 AM |
|
Will this work for charge and sync¿?
Basically my usage will be a Little bit different that bitcoint miner, we need to use as a charging and sync station.
I know the total AMP for both of them
10 port [10amp] =
• 5 devices of 1.0a (Charge & Sync) • 2 tablets of 2.1a (Charge & Sync) • Total load 9.2amp
¿Am I right?
19 port [20amp] =
• 9 devices of 1.0a (Charge & Sync) • 5 tablets of 2.1a (Charge & Sync) • Total load 19.5amp
¿Am I right?
49 port [75amp] =
• 38 devices of 1.0a (Charge & Sync) • 15 tablets of 2.1a (Charge & Sync) • total load 70.5amp
¿Am I right?
In resume, is the AMP measure by usb port or by total load?. Could I buy a 100amp 5v PSU for the 49 USB port? In order to supply 2.1a to all of the ports
|
|
|
|
klintay (OP)
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
January 12, 2015, 01:58:31 PM |
|
Will this work for charge and sync¿?
Basically my usage will be a Little bit different that bitcoint miner, we need to use as a charging and sync station.
I know the total AMP for both of them
10 port [10amp] =
• 5 devices of 1.0a (Charge & Sync) • 2 tablets of 2.1a (Charge & Sync) • Total load 9.2amp
¿Am I right?
19 port [20amp] =
• 9 devices of 1.0a (Charge & Sync) • 5 tablets of 2.1a (Charge & Sync) • Total load 19.5amp
¿Am I right?
49 port [75amp] =
• 38 devices of 1.0a (Charge & Sync) • 15 tablets of 2.1a (Charge & Sync) • total load 70.5amp
¿Am I right?
In resume, is the AMP measure by usb port or by total load?. Could I buy a 100amp 5v PSU for the 49 USB port? In order to supply 2.1a to all of the ports
The 19 port hub can only do a maximum of about 1-1.2 amps per port. price drop to $60 usd
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3794
Merit: 2500
|
|
January 12, 2015, 03:21:47 PM |
|
Will this work for charge and sync¿?
Basically my usage will be a Little bit different that bitcoint miner, we need to use as a charging and sync station.
I know the total AMP for both of them
10 port [10amp] =
• 5 devices of 1.0a (Charge & Sync) • 2 tablets of 2.1a (Charge & Sync) • Total load 9.2amp
¿Am I right?
19 port [20amp] =
• 9 devices of 1.0a (Charge & Sync) • 5 tablets of 2.1a (Charge & Sync) • Total load 19.5amp
¿Am I right?
49 port [75amp] =
• 38 devices of 1.0a (Charge & Sync) • 15 tablets of 2.1a (Charge & Sync) • total load 70.5amp
¿Am I right?
In resume, is the AMP measure by usb port or by total load?. Could I buy a 100amp 5v PSU for the 49 USB port? In order to supply 2.1a to all of the ports
I think with this Cable the load 2A is no problem for the HUB you can load one equipment over two ports!? Power Adapter USB Cable 2xUSB For connecting devices such as USB hard disks when the power provided by one USB port is not sufficient The power is provided parallel to the first power interface. • 1x USB port data/power, • 1x USB connector data/power • 1x USB power connector
|
|
|
|
paketecuento
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 13, 2015, 11:34:40 PM |
|
Hi,
The specs says:
"- Fully fused internally via multiple poly-fuse resettable fuses both on each individual port and on the main power feed to the Ports. "
This mean the hub allows to control power for every usb port? Please, can you specify if the USB port can be power off completely?
regards,
|
|
|
|
|