[ANN] [PMC] Premine Coin | Rare | Mining Transaction Fee Proof of Concept

[SlidingHorn]

Also make sure to use the box labeled "save as type:" and change it to (*.*) or it will likely safe the file as config.conf.txt   just a helpful hint.

Little quirks like this are why I avoid Windows like the plague whenever possible, lol

[1714842679]

1714842679

[1714842679]

1714842679

[1714842679]

1714842679

[Bergmannx]

People giving out coins should look at this e.g.:
https://bitcointalk.org/index.php?action=profile;u=212786;sa=showPosts

[BeeFer310]

I pimped your Coin a little.
I used the same sources.

If you like it you can tip me.


1JXcKNBenQX9jHYxSN24VNFjRQy6Dc1qbH

Not the best Coinlogo i have seen so far but I like it and its much better then the original.

100 PMC for the effort

[darcspawn]

Thank you all for over 3000 premine on 1P27E4f9194WGp633yGiSjgm9Y2xgHQ7MW!

But I'm having difficulty syncing... no block source available?

Got the premine.conf setup like the sample in premine-qt.exe folder, other coins are working fine. Any ideas?

Open Notepad and save a new txt file in your C:\<user>\appdata\roaming\premine folder
Open the file and paste the below in it:

server=1
rpcuser=theusername
rpcpassword=thepassword
rpcport=9335
rpcallowip=127.0.0.1
addnode=65.167.153.125
addnode=65.167.153.115
addnode=121.225.42.140
addnode=94.181.204.14
addnode=71.219.29.209
addnode=111.199.157.124
addnode=74.212.45.71
addnode=207.216.187.231
addnode=173.230.139.214

save the file as premine.conf
Reopen the wallet and should be syncing.

Also make sure to use the box labeled "save as type:" and change it to (*.*) or it will likely safe the file as config.conf.txt   just a helpful hint.

Man if i had a premine for everytime that has bitten me in the ass....

13sWybXe7CuzQtxizLcHtLJc6rs428d95W

[Musent]

People giving out coins should look at this e.g.:
https://bitcointalk.org/index.php?action=profile;u=212786;sa=showPosts

Wow, 4 different PMC addresses.

[Aderks]

I cant get wallet to sync?


Cant get any coins?

1JonCfR4YkRMw6SfQKLvsMW5EnxcQxDXys

Open Notepad and save a new txt file in your C:\<user>\appdata\roaming\premine folder
Open the file and paste the below in it:

server=1
rpcuser=theusername
rpcpassword=thepassword
rpcport=9335
rpcallowip=127.0.0.1
addnode=65.167.153.125
addnode=65.167.153.115
addnode=121.225.42.140
addnode=94.181.204.14
addnode=71.219.29.209
addnode=111.199.157.124
addnode=74.212.45.71
addnode=207.216.187.231
addnode=173.230.139.214

save the file as premine.conf
Reopen the wallet and should be syncing.

I did exactly that but it still says 41 hours behind...and not synced

If you go into Help, Debug, Console. and add each node separately it works. Worked for me.

I cut and pasted a line and it just said error method not found

Sorry its a bit different for the Console.

An example on how it needs to be is like this:
addnode 173.230.139.214 add

All of them:

addnode 65.167.153.125 add
addnode 65.167.153.115 add
addnode 121.225.42.140 add
addnode 94.181.204.14 add
addnode 71.219.29.209 add
addnode 111.199.157.124 add
addnode 74.212.45.71 add
addnode 207.216.187.231 add
addnode 173.230.139.214 add

Just do each seperately in the console and it should work.

[Musent]

People giving out coins should look at this e.g.:
https://bitcointalk.org/index.php?action=profile;u=212786;sa=showPosts

Glad I didn't send him any :/

[hyunsookmom]

I officially gave up, its not syncing after doing all these steps to the letter...

[hyunsookmom]

I cant get wallet to sync?


Cant get any coins?

1JonCfR4YkRMw6SfQKLvsMW5EnxcQxDXys

Open Notepad and save a new txt file in your C:\<user>\appdata\roaming\premine folder
Open the file and paste the below in it:

server=1
rpcuser=theusername
rpcpassword=thepassword
rpcport=9335
rpcallowip=127.0.0.1
addnode=65.167.153.125
addnode=65.167.153.115
addnode=121.225.42.140
addnode=94.181.204.14
addnode=71.219.29.209
addnode=111.199.157.124
addnode=74.212.45.71
addnode=207.216.187.231
addnode=173.230.139.214

save the file as premine.conf
Reopen the wallet and should be syncing.

I did exactly that but it still says 41 hours behind...and not synced

If you go into Help, Debug, Console. and add each node separately it works. Worked for me.

I cut and pasted a line and it just said error method not found

Sorry its a bit different for the Console.

An example on how it needs to be is like this:
addnode 173.230.139.214 add

All of them:

addnode 65.167.153.125 add
addnode 65.167.153.115 add
addnode 121.225.42.140 add
addnode 94.181.204.14 add
addnode 71.219.29.209 add
addnode 111.199.157.124 add
addnode 74.212.45.71 add
addnode 207.216.187.231 add
addnode 173.230.139.214 add

Just do each seperately in the console and it should work.

Error: Node already added (code -23)

Ive used other wallets but they opened and snced right from the start, why isnt this one?

[creditcoin_CRD]

People giving out coins should look at this e.g.:
https://bitcointalk.org/index.php?action=profile;u=212786;sa=showPosts

Glad I didn't send him any :/

The green-eyed monster strikes again. Truth is; hording this coin will kill it fast.

[Nullu]

People giving out coins should look at this e.g.:
https://bitcointalk.org/index.php?action=profile;u=212786;sa=showPosts

Glad I didn't send him any :/

The green-eyed monster strikes again. Truth is; hording this coin will kill it fast.

Yep. Hoarding the coin just makes your coins worthless. I don't understand what part of this people don't get. If there aren't enough people holding the coin, then there won't be any transactions, any mining, any confirmations or any trading. DEAD.

STOP HOARDING.

[itsallpc]

Come coin love do not forget the subreddit page http://www.reddit.com/r/preminecoin/comments/1vz35p/preminecoin_info_on_bitcointalk/



19k2zQ6YzCQ6eWMeFBbqPKmcxGTjpe9kat

[EcuaMobi]

I officially gave up, its not syncing after doing all these steps to the letter...

1) Close the wallet

2) Click here:
http://ecua.mobi/premine.php

A file should be downloaded.

3) Press [Windows]+R

4) Type

%APPDATA%/premine

and press enter

A folder should open

5) Copy the file downloaded on step 2) to the folder opened on step 4)

6) Open the wallet again

[Aderks]

I cant get wallet to sync?


Cant get any coins?

1JonCfR4YkRMw6SfQKLvsMW5EnxcQxDXys

Open Notepad and save a new txt file in your C:\<user>\appdata\roaming\premine folder
Open the file and paste the below in it:

server=1
rpcuser=theusername
rpcpassword=thepassword
rpcport=9335
rpcallowip=127.0.0.1
addnode=65.167.153.125
addnode=65.167.153.115
addnode=121.225.42.140
addnode=94.181.204.14
addnode=71.219.29.209
addnode=111.199.157.124
addnode=74.212.45.71
addnode=207.216.187.231
addnode=173.230.139.214

save the file as premine.conf
Reopen the wallet and should be syncing.

I did exactly that but it still says 41 hours behind...and not synced

If you go into Help, Debug, Console. and add each node separately it works. Worked for me.

I cut and pasted a line and it just said error method not found

Sorry its a bit different for the Console.

An example on how it needs to be is like this:
addnode 173.230.139.214 add

All of them:

addnode 65.167.153.125 add
addnode 65.167.153.115 add
addnode 121.225.42.140 add
addnode 94.181.204.14 add
addnode 71.219.29.209 add
addnode 111.199.157.124 add
addnode 74.212.45.71 add
addnode 207.216.187.231 add
addnode 173.230.139.214 add

Just do each seperately in the console and it should work.

Error: Node already added (code -23)

Ive used other wallets but they opened and snced right from the start, why isnt this one?

Weird. Did you create a config file? if you did maybe remove that. then try the console part. If that node is already added it should work.. odd

[jytou]

Thanks for the premine guys!
This is actually a very nice experiment... it may actually show us how bitcoin will work once it's fully mined. And this is full scale. Now we have to trade these coins... any exchange ahead?

[darcspawn]

People giving out coins should look at this e.g.:
https://bitcointalk.org/index.php?action=profile;u=212786;sa=showPosts

Glad I didn't send him any :/

The green-eyed monster strikes again. Truth is; hording this coin will kill it fast.

Its not hoarding I've been sending them out like mad. I have a whopping 250 PMC's left at the moment after having recieved 690... is that hoarding?

[crypto_girl]

Thank you all for over 3000 premine on 1P27E4f9194WGp633yGiSjgm9Y2xgHQ7MW!

But I'm having difficulty syncing... no block source available?

Got the premine.conf setup like the sample in premine-qt.exe folder, other coins are working fine. Any ideas?

Open Notepad and save a new txt file in your C:\<user>\appdata\roaming\premine folder
Open the file and paste the below in it:

server=1
rpcuser=theusername
rpcpassword=thepassword
rpcport=9335
rpcallowip=127.0.0.1
addnode=65.167.153.125
addnode=65.167.153.115
addnode=121.225.42.140
addnode=94.181.204.14
addnode=71.219.29.209
addnode=111.199.157.124
addnode=74.212.45.71
addnode=207.216.187.231
addnode=173.230.139.214

save the file as premine.conf
Reopen the wallet and should be syncing.

Also make sure to use the box labeled "save as type:" and change it to (*.*) or it will likely safe the file as config.conf.txt   just a helpful hint.

Thank you works great now! I made a mistake of placing the config file in the premine-qt.exe folder and not the appdata.

[hyunsookmom]

whats does this mean?

 Press [Windows]+R

[fenghush]

Need more people on board!

Thanks for the premine guys!
This is actually a very nice experiment... it may actually show us how bitcoin will work once it's fully mined. And this is full scale. Now we have to trade these coins... any exchange ahead?

[curefrankosflue]

In case you have still some to give away, I'd like to be part of this

1HcSLBT7EmUSgAddEuzn9jnqndVVJtqeVD

Thanks!

Thanks for 110 PMC to whoever sent them to me