jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
|
March 19, 2014, 10:09:01 PM |
|
Any code for underclocked to have 1wattvper gh from s1
|
|
|
|
palawan (OP)
|
|
March 19, 2014, 10:51:38 PM |
|
Any code for underclocked to have 1wattvper gh from s1
I have to upload the asic-freq with the lower frequency value. Which frequency do you want to try? Below are the list: option 'freq_value' '4f81' #400MHz option 'chip_freq' '400' option 'timeout' '35' #option 'freq_value' '4d81' #350MHz <-- factory default #option 'chip_freq' '350' #option 'timeout' '40' #option 'freq_value' '4c81' #325MHz #option 'chip_freq' '325' #option 'timeout' '40' #option 'freq_value' '0b81' #300MHz #option 'chip_freq' '300' #option 'timeout' '45' #option 'freq_value' '0981' #250MHz #option 'chip_freq' '250' #option 'timeout' '55' #option 'freq_value' '0781' #200MHz
[/quote]
|
halu
|
|
|
tzortz
|
|
March 20, 2014, 07:31:07 AM |
|
Any code for underclocked to have 1wattvper gh from s1
Have you seen anywhere done, 1watt/ gh/s for S1?
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
mmcgehee
Newbie
Offline
Activity: 9
Merit: 0
|
|
March 20, 2014, 04:19:24 PM |
|
I've over-clocked my S1s. They run a little faster.
Do I expose myself to any risk of damage to the hardware, in doing this? Once established they all run at 400MHz, and assuming I keep them cool, do I have nothing more to be concerned about as far as risk?
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
March 20, 2014, 05:31:29 PM |
|
Any code for underclocked to have 1wattvper gh from s1
Have you seen anywhere done, 1watt/ gh/s for S1? there is no reason to underclock the S1 unless you are paying something like $0.50/kwh at this moment. overclocking it to 198GH/410W is more cost-effective for the bulk of owners right now, and will probably stay that way until june when bringing it down to stock speeds for a bit better efficiency makes sense
|
|
|
|
tzortz
|
|
March 20, 2014, 10:06:39 PM |
|
Any code for underclocked to have 1wattvper gh from s1
Have you seen anywhere done, 1watt/ gh/s for S1? there is no reason to underclock the S1 unless you are paying something like $0.50/kwh at this moment. overclocking it to 198GH/410W is more cost-effective for the bulk of owners right now, and will probably stay that way until june when bringing it down to stock speeds for a bit better efficiency makes sense You do not regard power limits for many of us here. Im on the limit with 24 ants overclocked making 4.9 th/s. If I underclock, according to my calculations, I can add a dozen more ants , maintain my power consumption and exceed my currect hash speed.
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
palawan (OP)
|
|
March 20, 2014, 11:08:16 PM |
|
Any code for underclocked to have 1wattvper gh from s1
Have you seen anywhere done, 1watt/ gh/s for S1? there is no reason to underclock the S1 unless you are paying something like $0.50/kwh at this moment. overclocking it to 198GH/410W is more cost-effective for the bulk of owners right now, and will probably stay that way until june when bringing it down to stock speeds for a bit better efficiency makes sense You do not regard power limits for many of us here. Im on the limit with 24 ants overclocked making 4.9 th/s. If I underclock, according to my calculations, I can add a dozen more ants , maintain my power consumption and exceed my currect hash speed. At the request of another user; I've uploaded customized asic-files 300MHz and 325MHz and sent it to a user here. I can post the links here if there's interest. I don't know the effect on power usage as I don't underclock. It's the reason the S2 is so tempting to me... 1TH's for 1000W, wow! I just don't have the $ or BTC for it
|
halu
|
|
|
LouReed
|
|
April 14, 2014, 04:00:09 PM |
|
Does anyone have the config parameters to run these at 375 MHz? Apparently not every unit will overclock well at 400 MHz.
As long as you don't have the very early Antminer S1 blade; this is the value from the Antminer PDF that is posted by Bitmaintech. option 'freq_value' '4e81' #375M option 'chip_freq' '375' option 'timeout' '38' I've used this a few times when the weather gets too warm here in Los Angeles. It produces about 190+GH/s Edit: I see wedgy2k has already posted the same values. I can vouch for it as I've used it quite a number of times. Hello! I'm trying to clock my Ant to 375, but I'm not exactly sure how to do it. I've used your settings for 400, and 393 with no issues except way to high HW, but I'm not exactly sure what to do with the values you have posted here. I don't just copy/paste correct? I've tried that and do not get any change. Thanks!!
|
|
|
|
tzortz
|
|
April 14, 2014, 04:37:00 PM |
|
Does anyone have the config parameters to run these at 375 MHz? Apparently not every unit will overclock well at 400 MHz.
As long as you don't have the very early Antminer S1 blade; this is the value from the Antminer PDF that is posted by Bitmaintech. option 'freq_value' '4e81' #375M option 'chip_freq' '375' option 'timeout' '38' I've used this a few times when the weather gets too warm here in Los Angeles. It produces about 190+GH/s Edit: I see wedgy2k has already posted the same values. I can vouch for it as I've used it quite a number of times. Hello! I'm trying to clock my Ant to 375, but I'm not exactly sure how to do it. I've used your settings for 400, and 393 with no issues except way to high HW, but I'm not exactly sure what to do with the values you have posted here. I don't just copy/paste correct? I've tried that and do not get any change. Thanks!! Printscreen your result.
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
LouReed
|
|
April 14, 2014, 04:53:57 PM |
|
Does anyone have the config parameters to run these at 375 MHz? Apparently not every unit will overclock well at 400 MHz.
As long as you don't have the very early Antminer S1 blade; this is the value from the Antminer PDF that is posted by Bitmaintech. option 'freq_value' '4e81' #375M option 'chip_freq' '375' option 'timeout' '38' I've used this a few times when the weather gets too warm here in Los Angeles. It produces about 190+GH/s Edit: I see wedgy2k has already posted the same values. I can vouch for it as I've used it quite a number of times. Hello! I'm trying to clock my Ant to 375, but I'm not exactly sure how to do it. I've used your settings for 400, and 393 with no issues except way to high HW, but I'm not exactly sure what to do with the values you have posted here. I don't just copy/paste correct? I've tried that and do not get any change. Thanks!! Printscreen your result. Have the Printscreen pic, but I don't know how to paste it in, any ideas? I thought I did it in the past by just copy/paste, but it isn't working this time.
|
|
|
|
tzortz
|
|
April 14, 2014, 05:00:43 PM |
|
Does anyone have the config parameters to run these at 375 MHz? Apparently not every unit will overclock well at 400 MHz.
As long as you don't have the very early Antminer S1 blade; this is the value from the Antminer PDF that is posted by Bitmaintech. option 'freq_value' '4e81' #375M option 'chip_freq' '375' option 'timeout' '38' I've used this a few times when the weather gets too warm here in Los Angeles. It produces about 190+GH/s Edit: I see wedgy2k has already posted the same values. I can vouch for it as I've used it quite a number of times. Hello! I'm trying to clock my Ant to 375, but I'm not exactly sure how to do it. I've used your settings for 400, and 393 with no issues except way to high HW, but I'm not exactly sure what to do with the values you have posted here. I don't just copy/paste correct? I've tried that and do not get any change. Thanks!! Printscreen your result. Have the Printscreen pic, but I don't know how to paste it in, any ideas? I thought I did it in the past by just copy/paste, but it isn't working this time. Upload it here https://imageshack.com/ and then copy paste your image link.
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
LouReed
|
|
April 14, 2014, 05:07:58 PM |
|
Does anyone have the config parameters to run these at 375 MHz? Apparently not every unit will overclock well at 400 MHz.
As long as you don't have the very early Antminer S1 blade; this is the value from the Antminer PDF that is posted by Bitmaintech. option 'freq_value' '4e81' #375M option 'chip_freq' '375' option 'timeout' '38' I've used this a few times when the weather gets too warm here in Los Angeles. It produces about 190+GH/s Edit: I see wedgy2k has already posted the same values. I can vouch for it as I've used it quite a number of times. Hello! I'm trying to clock my Ant to 375, but I'm not exactly sure how to do it. I've used your settings for 400, and 393 with no issues except way to high HW, but I'm not exactly sure what to do with the values you have posted here. I don't just copy/paste correct? I've tried that and do not get any change. Thanks!! Printscreen your result. Have the Printscreen pic, but I don't know how to paste it in, any ideas? I thought I did it in the past by just copy/paste, but it isn't working this time. Upload it here https://imageshack.com/ and then copy paste your image link. Here ya go: http://imagizer.imageshack.us/a/img801/1523/v4yc.jpgI'm at work and playing around with it via Teamviewer, but I was trying last night before bed at home and couldn't get it then either.
|
|
|
|
tzortz
|
|
April 14, 2014, 05:12:48 PM |
|
Does anyone have the config parameters to run these at 375 MHz? Apparently not every unit will overclock well at 400 MHz.
As long as you don't have the very early Antminer S1 blade; this is the value from the Antminer PDF that is posted by Bitmaintech. option 'freq_value' '4e81' #375M option 'chip_freq' '375' option 'timeout' '38' I've used this a few times when the weather gets too warm here in Los Angeles. It produces about 190+GH/s Edit: I see wedgy2k has already posted the same values. I can vouch for it as I've used it quite a number of times. Hello! I'm trying to clock my Ant to 375, but I'm not exactly sure how to do it. I've used your settings for 400, and 393 with no issues except way to high HW, but I'm not exactly sure what to do with the values you have posted here. I don't just copy/paste correct? I've tried that and do not get any change. Thanks!! Printscreen your result. Have the Printscreen pic, but I don't know how to paste it in, any ideas? I thought I did it in the past by just copy/paste, but it isn't working this time. Upload it here https://imageshack.com/ and then copy paste your image link. Here ya go: http://imagizer.imageshack.us/a/img801/1523/v4yc.jpgI'm at work and playing around with it via Teamviewer, but I was trying last night before bed at home and couldn't get it then either. Here is better
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
LouReed
|
|
April 15, 2014, 02:02:51 AM |
|
Bump!
Anyone got any ideas?
Thanks!!
|
|
|
|
palawan (OP)
|
|
April 15, 2014, 04:26:47 AM |
|
Bump!
Anyone got any ideas?
Thanks!!
Hi LouReed, sorry very busy at work and I just saw your post just now. Did you use the code/script from the OP? You wish to change to 375MHz? I can post the code here to copy and paste to your Ant if you used my script from the OP originally....
|
halu
|
|
|
LouReed
|
|
April 15, 2014, 01:24:22 PM |
|
Bump!
Anyone got any ideas?
Thanks!!
Hi LouReed, sorry very busy at work and I just saw your post just now. Did you use the code/script from the OP? You wish to change to 375MHz? I can post the code here to copy and paste to your Ant if you used my script from the OP originally.... Hey palawan! Yes, I am using your script from the op. That would be awesome if you could make a copy/paste text again for 375 whenever you get a spare minute! Are the BTC/LTC addies in your Youtube video still good for donations? Thanks!!
|
|
|
|
palawan (OP)
|
|
April 15, 2014, 02:53:18 PM |
|
Bump!
Anyone got any ideas?
Thanks!!
Hi LouReed, sorry very busy at work and I just saw your post just now. Did you use the code/script from the OP? You wish to change to 375MHz? I can post the code here to copy and paste to your Ant if you used my script from the OP originally.... Hey palawan! Yes, I am using your script from the op. That would be awesome if you could make a copy/paste text again for 375 whenever you get a spare minute! Are the BTC/LTC addies in your Youtube video still good for donations? Thanks!! Because you use the script in the OP, the files are already in the Antminer. See below: ssh to the Antminer as root and copy and paste the lines inside the box below: clear cd /etc/config mv asic-freq asic-freq.400MHz mv asic-freq.375MHz asic-freq reboot
I'm using 393.75MHz (still gives me around 200GH/s) but with much less errors. Unfortunately, not all the Antminer S1's are "the same" from factory. I know you mentioned that you tried the 393.75MHz? That would have needed for modification of the asic-freq file? Good luck and let me know if you have problems. At the end of the script, it will automatically reboot the Ant so it's normal. Yea, the youtube addresses are still good, but please don't feel obligated Thank you very much.
|
halu
|
|
|
palawan (OP)
|
|
April 21, 2014, 12:19:33 AM |
|
bumped for newer ASIC's speed on the OP. I've been using this for a few weeks now (maybe a month)....
|
halu
|
|
|
LouReed
|
|
April 21, 2014, 01:52:34 AM |
|
Bump!
Anyone got any ideas?
Thanks!!
Hi LouReed, sorry very busy at work and I just saw your post just now. Did you use the code/script from the OP? You wish to change to 375MHz? I can post the code here to copy and paste to your Ant if you used my script from the OP originally.... Hey palawan! Yes, I am using your script from the op. That would be awesome if you could make a copy/paste text again for 375 whenever you get a spare minute! Are the BTC/LTC addies in your Youtube video still good for donations? Thanks!! Because you use the script in the OP, the files are already in the Antminer. See below: ssh to the Antminer as root and copy and paste the lines inside the box below: clear cd /etc/config mv asic-freq asic-freq.400MHz mv asic-freq.375MHz asic-freq reboot
I'm using 393.75MHz (still gives me around 200GH/s) but with much less errors. Unfortunately, not all the Antminer S1's are "the same" from factory. I know you mentioned that you tried the 393.75MHz? That would have needed for modification of the asic-freq file? Good luck and let me know if you have problems. At the end of the script, it will automatically reboot the Ant so it's normal. Yea, the youtube addresses are still good, but please don't feel obligated Thank you very much. Thanks! Sorry it took so long to reply, just been crazy busy the last week! Shot you a little Bit tip the other day for putting the time in to make these easy to follow instructions! 375 has been working awesome for me! Getting 191.6 avg on all my miners and we'll under 1% errors on them too!
|
|
|
|
palawan (OP)
|
|
April 21, 2014, 02:11:43 AM |
|
Thanks! Sorry it took so long to reply, just been crazy busy the last week! Shot you a little Bit tip the other day for putting the time in to make these easy to follow instructions! 375 has been working awesome for me! Getting 191.6 avg on all my miners and we'll under 1% errors on them too! Thank you very much! I wasn't sure if it was you so I didn't want to mention it and put pressure. Thanks again. I put a new thread on load-balance if it's something that interests you. It allows you to divide you Antminer S1 hash to multiple pools.
|
halu
|
|
|
|