[ANN] coolMiner - Lyra2z Miner for nVidia [Maxwell\Pascal\Volta\RTX]

[ShowMeCoins]

..
coolMiner/1.0 = Linux version
...

Yup, that's me .

12x1080ti running without problems.

[_Dr2]

After 1h looks good. There are no problems with connection to NH eu and Angrypool.
Hashrate is similar to ver. 1.1

[Ryzen2700x]

_Dr2 -thanks 4 update!.

..
coolMiner/1.0 = Linux version
...

Yup, that's me .

12x1080ti running without problems.

Nice to meet you :-),
What did you do to run it? because djm34  sad it's not working and I see that only you were able to, thanks in advance!

not working on linux

[ShowMeCoins]

If you mean that tpruvot version 2.2.6 is not working.....could be. I've compiled it once (gcc-6, cuda 9.2), it failed, I switched back to 2.2.5.
Then you came with CoolMiner (you've only released 1 linux version) and that gave me a 10-15% increase in output. I never changed the miner syntax and already used the '-p c=COIN,stats'-switch in place.

EDIT
It's not the compiling that failed, it's the Lyra2z that failed
/EDIT

[Ryzen2700x]

So you could run my Linux binary without problem?  I am wondering if its using shared files on destination PC and some users don't have this files and so they can't run my Linux binary, I use  the autogen.sh and then build.sh like in the tutorials and compressed the binary and upload it here, should I have another files with it?  (from Solidworks world I'm referring to "pack and go" ).
Thanks in advance!.

Edit: Congrats to this miner with a record for 1070Ti!  


You crashed my score with Zotac  1070Ti mini @2.5MHs  , now lets see who is going to crash my score with 1080Ti@3.81Mhs on Zotac Amp Extreme :-).

[ShowMeCoins]

So you could run my Linux binary without problem?  I am wondering if its using shared files on destination PC and some users don't have this files and so they can't run my Linux binary, I use  the autogen.sh and then build.sh like in the tutorials and compressed the binary and upload it here, should I have another files with it?  (from Solidworks world I'm referring to "pack and go" ).
Thanks in advance!.

PM'ed you a list of libraries in use by CoolMiner.
I think the biggest hurdle must be the reference to the Cuda 9.2 'libcudart.so.9.2'.
Which means they should install the latest CUDA.

..now lets see who is going to crash my score with 1080Ti@3.81Mhs on Zotac Amp Extreme

Not fair, looks like my stats never show up in the benchmarks.

[Ryzen2700x]

Only coolMiner-v1.1 and up support sending stats to pool, I made coolMiner-v1.2L binary for you so you can try:
https://nofile.io/f/rJCB6DFnwR6/coolMiner-Linux-v1-2L.tar.gz

Do you know the command line to force including libcudart.so.9.2 in the binary file  like on the windows binary? (on visual studio I have :""Static CUDA runtime library (-cudart static)").

[JackIT]

Can you please add the bug fix SP added for multi-GPU rigs to get to 100% utilization at launch?

Wen starting the miner, on my 12 GPU rigs it takes anywhere from 7 to over 15 minutes for all GPUs to get to 100% utilization and hashing at their full potential. During the first few minutes, many of the GPUs are completely idle.

Please see: https://github.com/sp-hash/suprminer
specifically: https://github.com/sp-hash/suprminer/commit/265ab574ed56fddd164023dae9d34e8fe0504202


with the Suprminer/SP-Hash miner the GPUs go to 100% utilization on Lyra2z within the first minute or two.

[_Dr2]

After ~5h coolminer works as it should on 96 GPU.

[Ryzen2700x]

Can you please add the bug fix SP added for multi-GPU rigs to get to 100% utilization at launch?

Wen starting the miner, on my 12 GPU rigs it takes anywhere from 7 to over 15 minutes for all GPUs to get to 100% utilization and hashing at their full potential. During the first few minutes, many of the GPUs are completely idle.

Please see: https://github.com/sp-hash/suprminer
specifically: https://github.com/sp-hash/suprminer/commit/265ab574ed56fddd164023dae9d34e8fe0504202


with the Suprminer/SP-Hash miner the GPUs go to 100% utilization on Lyra2z within the first minute or two.

Will check it, thank you for the Tip :-).

[Ryzen2700x]

Update: coolMiner-v1.3 !
Applied the suggested fix by JackIT to "Fix slow start in multi gpu-rigs".
Download-New Link:
https://nofile.io/f/cxRVoY5kRT3/coolMiner-x64-v1-3.zip

[JackIT]

Update: coolMiner-v1.3 !
Applied the suggested fix by JackIT to "Fix slow start in multi gpu-rigs".
Download:
https://nofile.io/f/ppDoBZd98ZK/coolMiner-x64-v1-3.zip

awesome.. downloading in a few mins

[boomboommin]

Update: coolMiner-v1.3 !
Applied the suggested fix by JackIT to "Fix slow start in multi gpu-rigs".
Download:
https://nofile.io/f/ppDoBZd98ZK/coolMiner-x64-v1-3.zip

not avalaible

[Ryzen2700x]

Try now: I think those Intel security patches aren't over yet...

Update: coolMiner-v1.3 !
Applied the suggested fix by JackIT to "Fix slow start in multi gpu-rigs".
Download-New Link:
https://nofile.io/f/cxRVoY5kRT3/coolMiner-x64-v1-3.zip

[jebidia]

Been running 1.2 on my 1080ti's for the past 6 or 7 hrs and it's running wonderfully...Ran 1.1 overnight without issues.   setting all of my 1080ti's to run -i 20 with 2012 core TDP 100 and getting approx 3.615.  About a 6% bump from 2.2.5.   Great job.

[2stout]

I can say after trying this, a definite performance improvement worth the dev fee; a win-win scenario for both miners and dev, Thx Again!

[thebd]

After 7h:42m of running 1.2, 2 out of 4 rigs crashed when the stratum was changed for dev's fee (Illegal memory access..)

overall gain from 2.2.5 was 3%

going to take 1.3 for a spin and coming back with feedback

[m1hyka]

Tried 1.3 stable for me with 2x1070+1x1080+3x1080Ti overall @17MH/s

[jebidia]

After 7h:42m of running 1.2, 2 out of 4 rigs crashed when the stratum was changed for dev's fee (Illegal memory access..)

overall gain from 2.2.5 was 3%

going to take 1.3 for a spin and coming back with feedback

What card?

[JackIT]

@Ryzen2700x

huge improvement with 1.3 as far as getting the GPU's up to speed and working.